TOTO ST446EMA#01 AQUIA IV Dual Flush Toilet Tank

1. Ifihan

This manual provides essential information for the proper installation, operation, and maintenance of your TOTO ST446EMA#01 AQUIA IV Dual Flush Toilet Tank. This tank is designed to pair specifically with compatible TOTO AQUIA IV toilet bowls. Please read these instructions thoroughly before beginning installation or use to ensure safe and efficient operation.

Image 1.1: The TOTO ST446EMA#01 AQUIA IV Dual Flush Toilet Tank, shown in Cotton finish. This image displays the exterior of the tank, featuring its clean lines and the dual flush button mechanism on the top lid.

2. Alaye Aabo

• Always turn off the main water supply to the toilet before attempting any installation, maintenance, or repair.
• Handle ceramic components with care. Porcelain can be heavy and brittle; improper handling may result in breakage or injury.
• It is recommended that installation be performed by a qualified plumber or professional to ensure proper function and prevent water damage.
• Wọ ohun elo aabo ti ara ẹni ti o yẹ, gẹgẹbi awọn ibọwọ ati aabo oju, lakoko fifi sori ẹrọ.
• Do not use harsh chemicals or abrasive cleaners on any part of the toilet tank, as this may damage the finish or internal components.

3. Package Awọn akoonu

Verify that all components are present and undamaged before beginning installation. The package for the TOTO ST446EMA#01 AQUIA IV Dual Flush Tank should include:

• TOTO ST446EMA#01 AQUIA IV Dual Flush Tank (Cotton finish)
• Internal flushing mechanism (pre-installed or separate)
• Tank-to-bowl bolts and washers
• Tank lid with dual flush buttons

Note: The toilet bowl, wax ring, and water supply line are typically sold separately and are not included with the tank.

4. Eto ati fifi sori

This section outlines the general steps for installing the TOTO ST446EMA#01 tank onto a compatible AQUIA IV toilet bowl. Refer to the specific installation guide provided with your toilet bowl for detailed instructions.

1. Ṣetan ọpọn Igbọnsẹ naa: Ensure the toilet bowl is securely installed to the floor and the wax ring is properly seated over the drain flange.
2. Attach Tank-to-Bowl Gasket: Place the large rubber gasket (spud washer) onto the threaded outlet at the bottom of the tank. Ensure it is seated correctly for a watertight seal.
3. Fi Tanki naa si: Carefully lift the tank and align the tank-to-bowl bolts with the holes on the back of the toilet bowl. Lower the tank onto the bowl, ensuring the gasket compresses evenly.
4. Ṣe aabo Tanki naa: From underneath the toilet bowl, slide washers onto the tank-to-bowl bolts and hand-tighten the nuts. Alternate tightening each nut a quarter turn at a time to ensure even pressure and prevent cracking the porcelain. Do not overtighten.
5. So Ipese Omi: Connect the flexible water supply line from the shut-off valve to the fill valve inlet at the bottom of the tank. Hand-tighten, then use a wrench for a final quarter-turn. Do not overtighten.
6. Mu Ipese Omi pada: Slowly turn on the main water supply valve. Check for leaks at all connections. Allow the tank to fill.
7. Idanwo Fọ: Perform a test flush to ensure proper operation and check for any leaks.
8. Install Tank Lid: Place the tank lid, with the dual flush buttons, securely on top of the tank.

5. Awọn ilana Iṣiṣẹ

The TOTO AQUIA IV Dual Flush Tank features a water-saving dual flush mechanism. The two buttons on the tank lid correspond to different flush volumes:

• Small Button (Partial Flush): Press the smaller button for a reduced water volume flush, ideal for liquid waste. This conserves water.
• Large Button (Full Flush): Press the larger button for a full water volume flush, designed for solid waste.

Ensure the buttons are pressed firmly and released completely after each flush to allow the mechanism to reset properly.

6. Itọju

Regular cleaning and periodic inspection will help maintain the performance and appearance of your toilet tank.

6.1. Ninu Ode

• Use a soft cloth or sponge with mild, non-abrasive soap and water.
• Wipe down the exterior surfaces of the tank and the tank lid.
• Fi omi ṣan daradara pẹlu omi mimọ ati ki o gbẹ pẹlu asọ asọ lati dena awọn aaye omi.
• Avoid using abrasive cleaners, scouring pads, or chemical solvents, as these can damage the vitreous china finish.

6.2. Internal Component Inspection

• Periodically remove the tank lid and inspect the internal components (fill valve, flush valve, flapper/seal).
• Check for any signs of wear, corrosion, or mineral buildup.
• Ensure the flapper or flush valve seal is clean and seating properly to prevent leaks.
• Do not place chemical toilet bowl cleaners or tablets directly into the tank, as they can damage rubber and plastic components, voiding the warranty.

7. Laasigbotitusita

This section addresses common issues you might encounter. For problems not listed or if solutions do not resolve the issue, contact a qualified plumber or TOTO customer support.

8. Awọn pato

The following are the technical specifications for the TOTO ST446EMA#01 AQUIA IV Dual Flush Toilet Tank:

9. Atilẹyin ọja ati Support

TOTO products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, registration, or to obtain technical support, please refer to the warranty card included with your product or visit the official TOTO website. When contacting support, please have your model number (ST446EMA#01) and proof of purchase readily available.