1. Ifihan
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your MICHELIN 4X4/SUV Digital Tyre Inflator, Model 12310. Please read these instructions thoroughly before first use and retain for future reference. This device is designed for inflating vehicle tyres and other inflatable items requiring specific pressure.
2. Alaye Aabo
- Always ensure the vehicle engine is running when using the inflator to prevent draining the vehicle battery.
- Ma ṣe lọ kuro ni inflator laini abojuto lakoko iṣẹ.
- Avoid prolonged continuous use. Allow the unit to cool down after 10-15 minutes of continuous operation to prevent overheating.
- Jeki kuro ni arọwọto awọn ọmọde.
- Má ṣe lo inflator náà ní ipò òjò tàbí nítòsí àwọn omi tàbí gáàsì tó lè jóná.
- Always check the recommended tyre pressure for your vehicle, typically found in the vehicle's owner's manual or on a sticker inside the driver's door jamb.
- Rii daju pe gbogbo awọn asopọ wa ni aabo ṣaaju ṣiṣe.
3. Package Awọn akoonu
Fi pẹ̀lẹ́pẹ̀lẹ́ tú gbogbo nǹkan náà kí o sì rí i dájú pé o ti gba àwọn nǹkan wọ̀nyí:
- MICHELIN 4X4/SUV Digital Tyre Inflator (Model 12310)
- High-pressure air hose with screw-on valve connector
- 12V DC power cable with car accessory socket plug
- Adaptor kit (e.g., ball needle, raft/toy adaptor)
- Storage bag (may vary by region)
Figure 3.1: The MICHELIN 4X4/SUV Digital Tyre Inflator shown with its standard accessories, including the air hose, power cable, various adaptors, and a storage bag.
4. Ọja Ipariview
The MICHELIN 4X4/SUV Digital Tyre Inflator is a robust and efficient device designed for quick and accurate tyre inflation. It features a digital display for precise pressure readings and controls for ease of use.
olusin 4.1: Iwaju view of the inflator, highlighting its compact design and integrated handle.
Nọmba 4.2: Alaye view of the digital display and control panel, showing buttons for power, unit selection, and pressure adjustment.
5. Eto
- Asopọ agbara: Insert the 12V DC power cable plug firmly into your vehicle's 12V accessory socket. Ensure the vehicle engine is running to provide adequate power and prevent battery drain.
- Asopọ okun: Connect the high-pressure air hose to the inflator's air outlet port. Ensure it is securely tightened.
- Tyre Valve Connection: Remove the dust cap from the tyre valve. Screw the inflator's valve connector onto the tyre valve stem until it is finger-tight. Do not overtighten.
6. Awọn ilana Iṣiṣẹ
- Agbara Tan: Press the power button on the inflator. The digital display will illuminate, showing the current tyre pressure.
- Yan Ẹka Ipa: Use the 'UNIT' button to cycle through available pressure units (e.g., PSI, BAR, KPA) until your desired unit is displayed.
- Ṣeto Ipa Ibi-afẹde: Use the '+' and '-' buttons to adjust the target pressure to your vehicle's recommended level.
- Ibẹrẹ Iṣeduro: Press the 'START' button (or equivalent power/play button, refer to Figure 4.2 for specific button layout) to begin inflation. The inflator will automatically stop once the preset pressure is reached.
- Bojuto Ilọsiwaju: Observe the digital display to monitor the pressure increase.
- Ge asopọ: Once inflation is complete and the inflator has stopped, unscrew the valve connector from the tyre valve stem. Replace the tyre valve dust cap. Disconnect the 12V power cable from the vehicle's accessory socket.
Figure 6.1: The inflator in use, connected to a vehicle tyre. Ensure the hose is securely attached to the valve stem.
6.1 Using Adaptors
For inflating items like sports balls or inflatable toys, select the appropriate adaptor from the kit. Screw the adaptor onto the tyre valve connector, then attach it to the item to be inflated. Follow the same inflation steps, ensuring not to overinflate.
7. Itọju
- Ninu: Pa ode ti inflator nu pẹlu ipolowoamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the unit is dry before storage.
- Ibi ipamọ: Store the inflator and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag to keep components organized and protected.
- Cable and Hose Inspection: Periodically inspect the power cable and air hose for any signs of damage, cracks, or fraying. Do not use the inflator if any damage is present.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Inflator ko ni agbara lori. | No power from 12V socket; vehicle engine off; blown fuse in vehicle or inflator plug. | Ensure vehicle engine is running. Check 12V socket for power. Inspect and replace fuse if necessary. |
| Inflator nṣiṣẹ sugbon ko ni inflate. | Air hose not securely connected; tyre valve connector not fully screwed on; leak in hose or valve. | Tighten all connections. Check hose and valve for damage. |
| Inflator stops prematurely. | Overheating due to prolonged use; target pressure reached. | Allow unit to cool down for 15-20 minutes. Verify target pressure setting. |
| Kika titẹ ti ko pe. | Loose connection; unit calibration issue. | Ensure connections are tight. Compare reading with a known accurate gauge. If persistent, contact support. |
9. Awọn pato
- Awoṣe: 12310
- Brand: MICHELIN
- Olupese: Michelin
- Awọn iwọn ọja: 13.5 x 10.2 x 24.7 cm
- Ìwọ̀n Nkan: 1.6 kg
- Voltage: 12 Volts DC
- Awọn batiri: 2 Lithium Metal batteries (included, likely for digital display/preset memory)
- Apejọ ti a beere: Rara
10. Atilẹyin ọja ati Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official MICHELIN automotive accessories webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
