1. Ọja Ipariview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Mọto ti o ni agbara giga: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Apẹrẹ Ergonomic: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Awọn ilana aabo
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Gbogbogbo Abo
- Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask.
- Rii daju pe workpiece wa ni aabo clamped ṣaaju ṣiṣe.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Ma ṣe ṣiṣẹ ohun elo ni awọn bugbamu bugbamu, gẹgẹbi niwaju awọn olomi ina, gaasi, tabi eruku.
- Pa awọn ọmọde ati awọn alafojusi kuro lakoko ti o nṣiṣẹ ohun elo agbara kan.
Itanna Aabo
- Rii daju pe ipese agbara voltage matches the rating on the tool's nameplate.
- Maṣe ṣe ilokulo okun naa. Maṣe lo okun fun gbigbe, fifa tabi yọọ ohun elo agbara. Jeki okun kuro lati ooru, epo, eti to mu, tabi awọn ẹya gbigbe.
- Ti o ba nṣiṣẹ ohun elo agbara ni ipolowoamp ipo ko ṣee ṣe, lo ẹrọ to ku lọwọlọwọ (RCD) ipese to ni aabo.
Ààbò Ẹ̀rọ Igun Pàtàkì
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Irinše ati Awọn ẹya ara ẹrọ
Awọn eroja pataki:
- Ara akọkọ: Houses the motor, electronics, and gearbox.
- Aabo: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Bọtini Titiipa Spindle: For easy disc changes.
- Yipada Ifaworanhan: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Awọn atẹgun atẹgun: For motor cooling and dust expulsion.
4. Eto
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Tẹ mọlẹ bọtini titiipa spindle.
- Place the inner clamping flange pẹlẹpẹlẹ awọn spindle.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Dabaru lori clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Tu bọtini titiipa spindle silẹ.
5. Awọn ilana Iṣiṣẹ
Titan / Pipa agbara
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Ayipada Iyara Iṣakoso
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Fi ọwọ́ méjèèjì mú ẹ̀rọ ìlọ náà dáadáa nígbà gbogbo.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Itọju
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Ninu
- Yọọ ọpa nigbagbogbo ṣaaju ṣiṣe mimọ.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Wipe the exterior of the tool with a damp asọ. Maṣe lo awọn kẹmika ti o lewu tabi awọn afọmọ abrasive.
Awọn erogba Karooti
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Ibi ipamọ
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Irinṣẹ ko bẹrẹ | Ko si ipese agbara Restart interlock activated (after power failure) Okun agbara ti bajẹ | Ṣayẹwo asopọ agbara Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Ọpa ma duro lakoko iṣẹ | Idaabobo apọju ti mu ṣiṣẹ Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Gbigbọn ti o pọju | Worn or damaged disc Disiki ti ko tọ Imudani alaimuṣinṣin | Rọpo disiki Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Wọ erogba gbọnnu Dust buildup in vents | Ṣe awọn gbọnnu ti a ṣe ayẹwo / rọpo nipasẹ ile-iṣẹ iṣẹ Clean air vents thoroughly |
8. Awọn pato
| Iwa | Iye |
|---|---|
| Nọmba awoṣe | 447668 |
| Agbara Input | 1700 W |
| Ijade agbara | 1050 W |
| Voltage | 230 V |
| Igbohunsafẹfẹ | 50/60 Hz |
| O pọju. Iwọn Disiki | 125 mm |
| Ko si fifuye Iyara | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| USB Ipari | 4 m |
| Awọn iwọn (L x W x H) | 340 x 77 x 105 mm |
| Iwọn | 2.6 kg |
| Àwọ̀ | Red, Black, Silver |
| Ohun elo | Irin |
9. Atilẹyin ọja ati Support
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webaaye tabi lori apoti ọja rẹ.
