Ọrọ Iṣaaju
This manual provides essential information for the installation, operation, and maintenance of the Okin JLDQ-12 Power Recliner Lift Chairs Motor Actuator. This product is designed as a direct replacement part for various JLDQ.12.157.333 series models, including JLDQ.12.157.333E, F, G, H, L, P, U, V, W, X, and Z. It is crucial to verify the motor SKU on the label and ensure the cable connectors and motor end shapes match your existing unit before installation.
Ọja Pariview
The Okin JLDQ-12 motor actuator is a linear actuator specifically engineered for use in power recliners and lift chairs. It comprises a robust motor housing, an extendable rod (stroke), and necessary electrical connection cables.
Image: The Okin JLDQ-12 motor actuator, showing the main body, extendable rod, and electrical cables. Included mounting hardware, such as screws and pins, are also visible.
Key Awọn ẹya ara ẹrọ
- Direct replacement for JLDQ.12.157.333E/F/G/H/L/P/U/V/W/X/Z models.
- Ni ipese pẹlu kekere-voltage DC motor (24V).
- Primarily designed for application in electric sofas and massage chairs.
Dimensions and Stroke
Image: A diagram illustrating the actuator's stroke length of 333mm (13.11 inches) and a minimum installation dimension (shrink) of 157mm (6.18 inches).
Product Label Details
Aworan: A sunmọ-soke view of the product label, displaying the model number JLDQ.12.157.333K, voltage (29V), wattage (48W), and duty cycle (1 minute ON / 8 minutes OFF). It also shows compliance certifications.
Awọn Asopọ USB
Aworan: A alaye view of the various electrical cable connectors attached to the actuator, including a standard round connector and a flat, multi-pin connector, essential for power and control signals.
Awọn pato
Imọ Data
| Ẹya ara ẹrọ | Iye |
|---|---|
| Awoṣe | JLDQ.12.157.333K |
| Motor Iru | Kekere-voltage DC motor (24V) |
| Igbohunsafẹfẹ isẹ | On 1 min / Off 8 min |
| Ọpọlọ | 333mm (13.11 inches) |
| Minimum Install Dimension (Shrink) | 157mm (6.18 inches) |
| Titari Agbara | 750N |
| Fa Agbara | 750N |
| Ifarahan | Black (PA), Silver White (Aluminum) |
| Iwọn Nkan | 4.56 iwon |
| Package Mefa | 22.5 x 7.5 x 4 inches |
| Ilu isenbale | China |
Eto ati fifi sori
Before beginning installation, ensure the power to the recliner or lift chair is disconnected. Verify that the motor SKU "JLDQ.12.157.333K" on the label and the cable connectors/motor end shapes match your existing unit.
Awọn irinṣẹ ti a beere
- Wrenches (appropriate sizes for mounting bolts)
- Screwdrivers (if applicable)
- Pliers (for pins, if applicable)
Igbesẹ-nipasẹ-Igbese fifi sori
- Carefully tip the recliner or lift chair to access the underside.
- Locate the existing motor actuator. Note its mounting points and how it connects to the chair's frame and mechanism.
- Disconnect all electrical cables from the old actuator. Pay attention to the type and orientation of each connector.
- Remove the mounting bolts or pins securing the old actuator to the chair frame.
- Carefully remove the old actuator.
- Position the new Okin JLDQ-12 actuator in the same location. Align the mounting holes.
- Secure the new actuator using the provided mounting bolts and pins. Ensure all connections are tight and secure.
- Connect all electrical cables to the new actuator. Ensure each connector is fully seated. Some models may have an extra accessory cable; if not used, secure it out of the way.
- Fi ifarabalẹ da alaga pada si ipo ti o tọ.
- Reconnect power to the chair and test the actuator's function.
Note: The new assembly may have a slightly different plastic mount, but the holes should be in the same location. Use the new mounting bolts provided.
Awọn ilana Iṣiṣẹ
Once the Okin JLDQ-12 motor actuator is installed, operate your recliner or lift chair using its standard remote control or switch.
- Press and hold the appropriate button on your remote or switch to extend or retract the footrest and recline the backrest.
- Tu bọtini naa silẹ nigbati ipo ti o fẹ ba ti de.
Important Operating Considerations
- The motor has an operation frequency of "On 1 minute / Off 8 minutes". This means the motor is designed for intermittent use. Avoid continuous operation for more than 1 minute to prevent overheating and ensure longevity. Allow at least 8 minutes of rest between extended uses.
- Do not exceed the maximum weight capacity of your recliner or lift chair.
- Ensure no obstructions are in the path of the moving parts during operation.
Itoju
Regular maintenance helps ensure the longevity and smooth operation of your Okin JLDQ-12 motor actuator.
- Ninu: Keep the actuator free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners directly on the motor or electrical components.
- Lubrication: The actuator is generally maintenance-free regarding lubrication. Do not apply lubricants unless specifically instructed by the manufacturer.
- Ayẹwo USB: Periodically inspect all electrical cables for signs of wear, fraying, or damage. Ensure all connections are secure.
- Ayẹwo iṣagbesori: Check mounting bolts and pins periodically to ensure they remain tight. Tighten if necessary.
Ibi ipamọ
If the chair or actuator is to be stored for an extended period, ensure it is in a dry, cool environment, away from direct sunlight and extreme temperatures.
Laasigbotitusita
If your recliner or lift chair is not functioning correctly after installing the Okin JLDQ-12 actuator, refer to the following troubleshooting steps.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Motor ko ṣiṣẹ | Ko si agbara | Check power supply to the chair. Ensure the power cord is securely plugged into an outlet and the chair. |
| Motor ko ṣiṣẹ | Loose USB asopọ | Verify all electrical cables connected to the actuator are securely seated. |
| Motor ko ṣiṣẹ | Faulty remote/switch | Test the remote or switch. If possible, try a known working remote/switch. |
| Motor operates intermittently or slowly | Gbigbona pupọ | Adhere to the "On 1 min / Off 8 min" duty cycle. Allow the motor to cool down. |
| Motor operates intermittently or slowly | Idilọwọ | Check for any objects or fabric obstructing the movement of the actuator or chair mechanism. |
| Actuator makes unusual noises | Iṣagbesori alaimuṣinṣin | Check and tighten all mounting bolts and pins. |
| Actuator makes unusual noises | Ti abẹnu oro | If noises persist and operation is affected, contact customer support. |
If the problem persists after attempting these solutions, it may indicate a more complex issue. Contact qualified service personnel or the manufacturer for assistance.
Atilẹyin ọja ati Support
Alaye atilẹyin ọja
For specific warranty terms and conditions, please refer to the warranty documentation provided with your original purchase or contact Okin customer support directly.
Onibara Support
For technical assistance, replacement parts, or further inquiries, please visit the official Okin webojula tabi kan si wọn onibara iṣẹ Eka.
