Ọrọ Iṣaaju
Thank you for choosing the Leader Accessories LA-502613 Bar Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
Image: Two Leader Accessories bar stools with light grey PU leather seats and chrome bases, positioned at a kitchen island.
Alaye Aabo
For your safety and to ensure the longevity of your bar stools, please observe the following:
- Ensure the total weight on the stool does not exceed 200 kg (440 lbs) to maintain stability.
- Always place the stool on a flat and stable surface to prevent tipping.
- Maṣe duro lori otita.
- Keep children away from the stool during assembly.
- Regularly check all screws and connections to ensure they are tight.
Package Awọn akoonu
Each set includes the following components. Please verify all parts are present before beginning assembly.
- 2 x Seat with Backrest (PU Leather, Light Grey)
- 2 x Silinda Gáàsì Gíga
- 2 x Footrest Ring
- 2 x Base Plate (Chrome Steel)
- 2 x Protective Cap for Gas Lift
- Hardware Apejọ (skru, washers, Allen bọtini)
Eto ati Apejọ
Assembly of each bar stool is designed to be quick and straightforward, typically completed in three simple steps.
- Attach the Footrest to the Gas Lift: Remove the protective cap from the top of the gas lift cylinder. Slide the footrest ring onto the gas lift cylinder. Ensure it is securely seated.
- Fi Gas Gbe sinu Ipilẹ: Place the chrome steel base plate on a flat surface. Insert the bottom end of the gas lift cylinder into the central hole of the base plate. The gas lift should fit snugly.
- So Ijoko si Igbesoke Gaasi: Align the mounting plate under the seat with the top of the gas lift cylinder. Press the seat firmly onto the gas lift. The weight of the user will help secure the connection.
Aworan: Alaye view of the gas lift cylinder and the footrest ring, indicating the SGS certification.
Image: Close-up of the bright plating chassis (base) and the footrest, highlighting the design.
Tún àwọn ìgbésẹ̀ wọ̀nyí ṣe fún ìjókòó igi kejì.
Awọn ilana Iṣiṣẹ
Siṣàtúnṣe ijoko Giga
The bar stool features an adjustable height mechanism for personalized comfort. To adjust the height:
- Lati gbe ijoko naa soke: While standing, pull the lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
- Lati sokale ijoko: While seated, pull the lever located under the seat upwards. The seat will lower under your weight. Release the lever when the desired height is reached.
Swivel Išė
The seat can rotate 360 degrees, allowing for easy movement and interaction without needing to reposition the entire stool.
Itoju
Itọju to peye yoo fa igbesi aye ati irisi ti awọn igbẹ igi rẹ pọ si.
- Cleaning the PU Leather Seat:
Image: Close-up texture of the light grey PU leather seat, showing the quilted design.
Wipe the PU leather surface with a soft, damp cloth. For stubborn stains, use a mild soap solution and then wipe clean with a dry cloth. Avoid abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the material.
- Cleaning the Chrome Steel Base:
Wipe the chrome parts with a soft, dry cloth to remove dust and fingerprints. For smudges, use a chrome cleaner or a damp cloth with a small amount of mild detergent, then polish with a dry cloth. Avoid abrasive pads or cleaners that can scratch the chrome finish.
- Awọn iṣayẹwo deede: Máa ṣàyẹ̀wò gbogbo àwọn skru àti àwọn ìsopọ̀ láti rí i dájú pé wọ́n wà ní dídì. Tún-dídì mú tí ó bá pọndandan láti mú kí ó dúró ṣinṣin àti ààbò.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Stool wobbles or is unstable. | Loose awọn isopọ tabi uneven pakà. | Ensure all screws are tightened. Place the stool on a flat, even surface. |
| Ṣíṣe àtúnṣe gíga kò ṣiṣẹ́. | Gas lift cylinder issue or lever malfunction. | Check if the protective cap on the gas lift was fully removed during assembly. Ensure the lever mechanism is not obstructed. If the issue persists, the gas lift may need replacement. |
| Squeaking noise during swivel. | Lack of lubrication in the swivel mechanism. | Apply a small amount of silicone-based lubricant to the swivel mechanism under the seat. |
Awọn pato
Image: Technical drawing illustrating the dimensions of the bar stool, including seat width, depth, backrest height, and adjustable height range.
- Nọmba awoṣe: LA-502613
- Ohun elo: PU Leather (seat), Chrome Steel (frame, base)
- Àwọ̀: Imọlẹ Grẹy
- Overall Dimensions (per stool): 37 cm (D) x 40 cm (W) x 91-112 cm (H)
- Awọn iwọn ijoko: 37 cm (D) x 40 cm (W)
- Giga Afẹyinti: 30 cm
- Giga Ijoko Atunse: 62-83 cm (approx. 24.4 - 32.7 inches)
- Iwọn Ipilẹ: 38.5 cm
- Weight Capacity (per stool): 200 kg (440 lbs)
- Product Weight (per stool): O to 7.25 kg
Alaye atilẹyin ọja
Leader Accessories products are manufactured to high-quality standards. For specific warranty details, please refer to the purchase documentation or contact your retailer. This warranty typically covers manufacturing defects under normal use.
Onibara Support
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact Leader Accessories customer service through your original point of purchase or visit the official Leader Accessories webojula fun support awọn aṣayan.
Fun alaye siwaju sii, o le ṣàbẹwò awọn Leader Accessories Store on Amazon.
