Alaye Aabo pataki
Before operating the STIGA HPS 550 R pressure washer, please read and understand all safety instructions. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.
- Máa lo ohun èlò ààbò ara ẹni tó yẹ nígbà gbogbo, títí bí àwọn gíláàsì ààbò àti ààbò ìgbọ́rọ̀.
- Má ṣe darí ọkọ̀ ojú omi náà sí àwọn ènìyàn, ẹranko tàbí àwọn ohun èlò iná mànàmáná.
- Ensure all connections are secure before starting the unit.
- Do not operate the pressure washer in the rain or near flammable liquids.
- Ge asopọ ipese agbara ṣaaju ṣiṣe eyikeyi itọju tabi mimọ.
- Pa awọn ọmọde ati awọn ohun ọsin kuro ni agbegbe iṣẹ.
Ọja Pariview
The STIGA HPS 550 R is a robust cold water pressure washer designed for effective cleaning tasks. It features a durable construction and is equipped to handle various outdoor cleaning needs.
Nọmba 1: Iwaju view of the STIGA HPS 550 R Pressure Washer, showing the main unit, hose reel, and spray gun holder.
Nọmba 2: Apa view of the STIGA HPS 550 R Pressure Washer, highlighting the integrated hose reel and accessory storage.
Eto ati Apejọ
Follow these steps to correctly set up your STIGA HPS 550 R pressure washer:
- Ṣii silẹ: Carefully remove all components from the packaging. Verify that all parts listed in the "What's in the Box" section are present. The package includes 1 unit.
- Mu Apejọ: Attach the handle to the main unit. Ensure it clicks securely into place or is fastened with the provided screws.
- Hose Reel: If not pre-assembled, attach the hose reel to its designated position. Wind the high-pressure hose onto the reel.
- Asopọ Wiwọle Omi: Connect a garden hose (not supplied) to the water inlet on the pressure washer. Ensure the water supply is clean and free of debris.
- Asopọ Okùn Titẹ Giga: Connect one end of the high-pressure hose to the pressure washer's outlet and the other end to the spray gun. Tighten all connections firmly by hand.
- Asomọ Nozzle: Select the appropriate nozzle for your cleaning task and attach it to the spray gun lance.
- Detergent Tank (if applicable): Fill the detergent tank with suitable pressure washer detergent if required for your cleaning task.
Nọmba 3: Ẹyìn view of the STIGA HPS 550 R Pressure Washer, showing the power cord storage and water inlet connection point.
Awọn ilana Iṣiṣẹ
To operate your STIGA HPS 550 R pressure washer safely and effectively:
- Ipese Omi: Tan ipese omi patapata.
- Yọ Afẹfẹ kuro: Squeeze the trigger on the spray gun to release any air trapped in the system. Allow water to flow through until a steady stream emerges.
- Asopọ agbara: Pulọọgi okun agbara sinu iṣan itanna ti ilẹ.
- Bẹrẹ Ẹka naa: Yipada agbara ifoso titẹ si ipo “ON”. Awọn motor yoo bẹrẹ.
- Bẹrẹ Isọmọ: Hold the spray gun firmly with both hands. Direct the nozzle at the surface to be cleaned, maintaining a safe distance. Squeeze the trigger to start the high-pressure spray.
- Adjusting Pressure/Nozzle: Adjust the spray pattern or change nozzles as needed for different cleaning tasks.
- Iṣe idaduro: To stop the spray, release the trigger. To turn off the unit, switch the power button to "OFF" and unplug the power cord.
- Imukuro Ipa: After turning off the unit and before disconnecting hoses, squeeze the spray gun trigger to release any remaining pressure in the system.
Nọmba 4: Apa view of the STIGA HPS 550 R Pressure Washer with the handle extended, showing its portability features.
Itọju ati Ibi ipamọ
Itọju to peye n ṣe idaniloju pe fifẹ titẹ rẹ yoo pẹ to ati pe yoo ṣiṣẹ daradara.
- Lẹhin lilo kọọkan:
- Disconnect water and power.
- Drain all water from the pump, hoses, and spray gun to prevent freezing damage.
- Clean the nozzle and water inlet filter.
- Ibi ipamọ: Store the pressure washer in a dry, frost-free environment. Coil the high-pressure hose and power cord neatly.
- Igba otutu: If storing in freezing temperatures, use a pump protector or antifreeze solution to prevent internal damage.
- Awọn iṣayẹwo deede: Periodically inspect hoses, connections, and the power cord for wear or damage. Replace any damaged parts immediately.
Laasigbotitusita
Tọkasi apakan yii fun awọn ọran ti o wọpọ ati awọn ojutu wọn.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ẹka ko bẹrẹ | No power supply; Power switch off; Faulty outlet | Ṣayẹwo asopọ okun agbara; Rii daju pe iyipada wa ON; Gbiyanju iṣan ti o yatọ. |
| Iwọn kekere | Insufficient water supply; Clogged nozzle; Air in pump; Leaking connections | Ensure full water flow; Clean or replace nozzle; Purge air from system; Tighten connections. |
| Omi n jo | Awọn isopọ alaimuṣinṣin; Ti bajẹ Eyin-oruka tabi edidi | Tighten all hose connections; Inspect and replace damaged O-rings/seals. |
| Motor runs but no water spray | No water supply; Clogged inlet filter; Air in pump | Check water supply; Clean inlet filter; Purge air from system. |
Awọn pato
Key technical specifications for the STIGA HPS 550 R pressure washer:
- Awoṣe: STIGA HPS 550 R
- Nọmba itọkasi: 2C1502504/ST1
- Ipa ti o pọju: 150 Pẹpẹ
- Iru Omi: Omi tutu
- Oṣuwọn Sisan ti o pọju: 520 liters fun wakati kan
- Iwọn ojò: 1 lita
- Iwọn Ọja: 6 kg
- Awọn iwọn ọja: 43.6 x 40.3 x 82.5 cm
- Orisun Agbara: Hand_powered
- Àwọ̀: Dudu/Grẹy
- Ibamu: DEDE
Atilẹyin ọja ati Support
For warranty claims or technical support regarding your STIGA HPS 550 R pressure washer, please contact your retailer or the official STIGA customer service. Keep your proof of purchase for any warranty-related inquiries.
The product is sold with a standard return policy of 30 days. For specific warranty terms, refer to the documentation provided at the time of purchase or visit the official STIGA webojula.
O le ṣàbẹwò awọn Stiga Store on Amazon fun alaye siwaju sii.
