True 970103 Lae Sn4B40P3-Y T3 4.0M Probe User Manual

Ọrọ Iṣaaju

This manual provides essential information for the proper installation, operation, and maintenance of your True 970103 Lae Sn4B40P3-Y T3 4.0M Probe. This product is a specialized component designed for food service supply applications, originating from Italy. It is supplied as a single unit with specific package dimensions of 4.0" (L) x 6.0" (W) x 9.0" (H).

Alaye Aabo

Please read and understand all safety instructions before using the probe. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• Always ensure the power to the equipment is disconnected before installing or removing the probe.
• Handle the probe with care to avoid bending or damaging the cable or sensor tip.
• Do not expose the probe to temperatures or environments outside its specified operating range.
• Keep the probe away from water or other liquids unless specifically designed for immersion.
• Only use the probe for its intended purpose as a temperature sensing device in compatible systems.

Ọja Pariview

The True 970103 Lae Sn4B40P3-Y T3 4.0M Probe is a critical component for accurate temperature measurement in various food service applications. It consists of a long, coiled yellow cable connected to a grey sensor tip.

Image: The True 970103 probe, showing its coiled yellow cable and the grey sensor tip. The cable is neatly bundled, indicating its length and flexibility for various installations.

Ohun ti o wa ninu Apoti

• 1 x True 970103 Lae Sn4B40P3-Y T3 4.0M Probe (Replacement Part)

Ṣeto

The True 970103 probe is designed for integration into existing food service equipment. Follow these general steps for setup:

1. Igbaradi: Ensure the equipment where the probe will be installed is turned off and disconnected from its power source.
2. Ibi: Identify the designated port or area for the temperature probe within your system. Refer to your equipment's specific manual for precise installation points.
3. Asopọmọra: Carefully insert the probe's connector into the corresponding receptacle. Ensure a secure and firm connection to prevent signal loss or inaccurate readings.
4. Ipa ọna: Route the probe cable in a manner that avoids kinks, sharp bends, or exposure to excessive heat or moving parts. Secure the cable if necessary to prevent accidental dislodgement.
5. Ìmúdájú: Once installed, reconnect power to your equipment and perform a system check to confirm the probe is recognized and providing readings.

Awọn ilana Iṣiṣẹ

Once properly installed, the True 970103 probe operates by continuously monitoring temperature within its environment. Its operation is typically passive, providing data to a connected control system or display unit.

• Abojuto Tesiwaju: The probe will automatically transmit temperature data to the connected system.
• Itumọ data: Refer to your equipment's display or control interface to read the temperature values provided by the probe.
• Isopọpọ eto: The probe is designed to work seamlessly with compatible True brand or other food service equipment that utilizes this specific probe type.

Itọju ati Itọju

Proper maintenance ensures the longevity and accuracy of your True 970103 probe.

• Ninu: If the probe tip or cable becomes soiled, gently wipe it with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, especially near the connector.
• Ayewo: Periodically inspect the probe cable for any signs of wear, cuts, or damage. Check the sensor tip for any physical deformities.
• Ibi ipamọ: If the probe is removed from service, coil the cable loosely and store it in a clean, dry place away from extreme temperatures and direct sunlight.
• Yago fun Wahala: Do not pull on the cable to disconnect the probe. Always grasp the connector firmly.

Laasigbotitusita

If you experience issues with your True 970103 probe, consider the following common problems and solutions:

If the problem persists after attempting these solutions, please contact True customer support or a qualified technician.

Awọn pato

Atilẹyin ọja ati Support

For warranty information or technical support regarding your True 970103 Lae Sn4B40P3-Y T3 4.0M Probe, please refer to the documentation provided with your original equipment or contact True customer service directly. Keep your purchase receipt and model number handy for faster service.

Ibi iwifunni: Please visit the official True Manufacturing website for the most current contact details for customer support and service centers.