Ọrọ Iṣaaju
This manual provides instructions for the installation, operation, and maintenance of the Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Alaye Aabo
Awọn Itọsọna Aabo pataki
- Ka awọn itọnisọna wọnyi daradara.
- Pa awọn ilana wọnyi fun itọkasi ọjọ iwaju.
- Heed all warnings provided with the product and in this manual.
- Tẹle gbogbo fifi sori ẹrọ ati ilana iṣẹ.
- Do not use this apparatus near water or in excessively humid environments.
- Mọ pẹlu asọ gbigbẹ nikan.
- Install the camera in accordance with the manufacturer's instructions and local electrical codes.
- Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye. Maṣe gbiyanju lati ṣe iṣẹ ọja yii funrararẹ.
Package Awọn akoonu
Kini To wa
Verify that all items listed below are present in your package. If any items are missing or damaged, contact your supplier immediately.
- Pelco P2230L-ESR PTZ Network Camera
- Ohun elo iṣagbesori (awọn skru, awọn ìdákọró)
- Awoṣe fifi sori ẹrọ
- Quick Bẹrẹ Itọsọna
Ọja Pariview
Awọn Irinṣẹ Kamẹra
The Pelco P2230L-ESR is a high-performance PTZ (Pan-Tilt-Zoom) network camera designed for environmental surveillance. It features a 2-megapixel sensor, infrared (IR) illumination, Wide Dynamic Range (WDR), and full HD resolution for clear imaging in various conditions.
This image displays the Pelco P2230L-ESR PTZ Network Camera, showing its dome-shaped lower section containing the lens and the cylindrical upper housing.
Key Awọn ẹya ara ẹrọ
- Sensọ: 1/3-inch CMOS Sensor
- Ipinnu: 1920 x 1080 (HD ni kikun 1080p)
- Lẹnsi: 4.3 mm ~ 129 mm varifocal Lens
- Sun-un Optical: 30x
- Imọlẹ IR: 850 nm, up to 150 m range
- Ṣiṣe koodu fidio: H.265, H.264, and MJPEG
- Ẹya onina: +15° to –90°
- Iṣe Imọlẹ Kekere: Down to 0.3 lux
- Ibiti Yiyipo (WDR): 100 dB
- Iwari: Sabotage and Simple Motion Detection
- Iwọn Ayika: IP66 weatherproof for outdoor use
Ṣeto
Fifi sori Itọsọna
The camera is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions. Proper installation is crucial for optimal performance and longevity.
This diagram illustrates the detailed dimensions of the Pelco P2230L-ESR camera in various views (front, side, top, bottom), providing measurements in both inches and centimeters for precise installation planning.
Wiring ati awọn isopọ
- Asopọ agbara: Connect the camera to a suitable power source as specified in the technical specifications. Ensure the power supply meets the camera's requirements.
- Isopọ nẹtiwọki: Connect an Ethernet cable from the camera's network port to your network switch or router. This provides both data and potentially Power over Ethernet (PoE) if supported by your switch.
- Optional I/O Connections: If applicable, connect external alarm inputs/outputs or audio devices according to the camera's interface and your system requirements. Refer to the detailed wiring diagram in the full product manual for specific pinouts.
This image shows a standard blue Ethernet cable with RJ45 connectors, used for establishing a wired network connection to the camera.
Iṣeto Nẹtiwọọki akọkọ
After physical installation, access the camera's web interface using its default IP address or by using a Pelco discovery tool. Follow the on-screen prompts to set up network parameters, create secure user accounts, and configure initial camera settings such as time zone and date.
Ṣiṣẹ
Isẹ kamẹra
Iwọle si awọn Web Ni wiwo
Ṣii a web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar. Log in using your configured username and password. The web interface provides access to live view, recording settings, motion detection, and PTZ controls.
Iṣakoso Pan-Tilt-Zoom (PTZ)
Use the PTZ controls within the camera's web interface or a compatible VMS (Video Management System) to adjust the camera's pan, tilt, and zoom functions.
- Akara: Rotates the camera horizontally to cover a wider area.
- Tẹ: Adjusts the camera's vertical angle to look up or down.
- Sun-un: Magnifies or de-magnifies the view. The camera features a powerful 30x optical zoom for detailed observation.
Gbigbasilẹ ati Ibi ipamọ
Configure recording schedules, motion-triggered recording, and continuous recording options. Set up storage destinations such as Network Attached Storage (NAS) or a local SD card (if supported by the specific camera model) for video archives.
Wiwa išipopada
Set up motion detection zones and sensitivity levels to trigger alarms, recordings, or notifications when movement is detected within the defined surveillance area. This feature helps in efficient monitoring and storage management.
Itoju
Itoju ati Itọju
Ninu
Regularly clean the camera's lens and housing with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the optical surfaces or the camera's finish. For stubborn dirt, use a mild soap solution.
Famuwia Awọn imudojuiwọn
Periodically check the official Pelco website for firmware updates. Keeping the camera's firmware up-to-date ensures optimal performance, enhances security features, and provides access to new functionalities. Follow the instructions provided with the firmware update package carefully.
Awọn ero Ayika
Ensure the camera's seals and connections remain intact to maintain its IP66 weatherproof rating, especially after any maintenance or installation adjustments. Inspect for any signs of wear or damage that could compromise its environmental protection.
Laasigbotitusita
Wọpọ Oran ati Solusan
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si kikọ sii fidio | Power issue, network cable disconnected, incorrect IP address, camera malfunction | Check power supply, verify network cable connection, confirm IP address and network settings. Restart the camera. |
| Didara aworan ti ko dara | Dirty lens, improper focus, low light conditions, network bandwidth limitations | Clean the lens, adjust focus via the web interface, ensure adequate lighting, check network bandwidth and camera settings. |
| Awọn iṣakoso PTZ ko dahun | Network connectivity issues, software glitch, camera malfunction, incorrect user permissions | Verify network connection, restart the camera, update firmware, check user permissions in the web ni wiwo. |
| Wiwa išipopada ko ṣiṣẹ | Incorrect sensitivity settings, detection zones not configured, event actions not set | Adjust motion detection sensitivity and ensure zones are properly defined in the web interface. Verify event actions are configured. |
| Ko le wọle si web ni wiwo | Incorrect IP address, firewall blocking, network issue, browser compatibility | Confirm camera's IP address, check local network settings and firewall rules. Try a different web kiri ayelujara. |
| IR illumination not working | IR sensor blocked, setting disabled, hardware fault, insufficient power | Ensure IR sensor is clear, check IR settings in the web interface, verify power supply. Contact support if issue persists. |
Awọn pato
Imọ ni pato
- Awoṣe: P2230L-ESR
- Sensọ: 1/3-inch CMOS Sensor
- Ipinnu: 1920 x 1080 (HD ni kikun 1080p)
- Lẹnsi: 4.3 mm ~ 129 mm varifocal Lens
- Sun-un Optical: 30x
- Ibiti IR: Up to 150 m (850 nm IR Illumination)
- Ṣiṣe koodu fidio: H.265, H.264, MJPEG
- Ẹya onina: +15° to –90°
- Imọlẹ Kekere: Down to 0.3 lux
- Ibiti Yiyipo (WDR): 100 dB
- Iwọn fireemu: Up to 60 Images per Second (ips)
- Iwari: Sabotage and Simple Motion Detection
- Iwọn Idaabobo Kariaye: IP66 (Ibo oju-ọjọ)
- Iru fifi sori: Ògiri Ògiri
- Asopọmọra: Wi-Fi (Wireless Communication Technology)
- UPC: 700880346648
Atilẹyin ọja ati Support
Product Warranty and Customer Support
For detailed warranty information, please refer to the official Pelco website or the warranty card included with your product package. Warranty terms and conditions may vary by region and purchase date.
For technical assistance, troubleshooting, or further inquiries regarding your Pelco P2230L-ESR camera, please contact Pelco customer support. Their team can provide expert guidance and resolve any issues you may encounter.
You can find contact information and additional resources, including comprehensive product documentation and FAQs, on the official Pelco webojula: www.pelco.com
