Ẹ̀rọ-ìbánisọ̀rọ̀ 3 AMP Ìwé Ìtọ́ni 5V 6V BEC (EFLA950)

1. Alaye Aabo

IKILO: Ka gbogbo itọnisọna itọnisọna lati di faramọ pẹlu awọn ẹya ara ẹrọ ti ọja ṣaaju ṣiṣe. Ikuna lati ṣiṣẹ ọja daradara le ja si ibajẹ ọja, ohun-ini ti ara ẹni ati fa ipalara nla. Eleyi jẹ a fafa ifisere ọja. O gbọdọ ṣiṣẹ pẹlu iṣọra ati oye ti o wọpọ ati nilo diẹ ninu agbara ẹrọ ipilẹ. Ikuna lati ṣiṣẹ ọja yi ni ọna ailewu ati lodidi le ja si ipalara tabi ibajẹ ọja tabi ohun-ini miiran. Ọja yii kii ṣe ipinnu fun lilo nipasẹ awọn ọmọde laisi abojuto agbalagba taara. Ma ṣe lo pẹlu awọn paati ti ko ni ibamu tabi paarọ ọja yii ni eyikeyi ọna ita awọn itọnisọna ti a pese nipasẹ Horizon Hobby, LLC. Itọsọna ọja ni awọn ilana fun ailewu, isẹ ati itọju. O ṣe pataki lati ka ati tẹle gbogbo awọn itọnisọna ati awọn ikilọ ninu iwe afọwọyi, ṣaaju iṣakojọpọ, iṣeto tabi lilo, lati le ṣiṣẹ ni deede ati yago fun ibajẹ tabi ipalara nla.

2. Ọja Ipariview

The E-flite 3 AMP 5V 6V BEC (Battery Eliminator Circuit) is designed to provide a stable and regulated power supply to your receiver and servos in remote control aircraft. It converts a higher input voltage from the main flight battery to a lower, constant voltage (either 5V or 6V, selectable) suitable for sensitive electronic components, eliminating the need for a separate receiver battery.

Kini o wa ninu apoti:

• 1x E-flite 3 AMP 5V 6V BEC

Image: The E-flite 3 AMP 5V 6V BEC (EFLA950) unit, showing the input and output wires with connectors.

3. Awọn pato

4. Fifi sori ẹrọ ati Oṣo

The E-flite 3 AMP 5V 6V BEC is designed for straightforward integration into your RC aircraft's power system. Ensure all connections are secure and correct before applying power.

1. Ṣe idanimọ awọn isopọ: The BEC has an input side (typically with a larger connector for the main flight battery) and an output side (typically with a standard receiver connector). Refer to the product image for visual identification.
2. Asopọ-iwọle: Connect the input wires of the BEC to your main flight battery or the appropriate power output from your Electronic Speed Controller (ESC) if it does not have a built-in BEC. Ensure correct polarity (red to positive, black to negative).
3. Asopọ jade: Connect the output wire of the BEC to an available channel on your receiver. This will supply regulated power to the receiver and all connected servos.
4. Voltage Aṣayan: The EFLA950 BEC allows selection between 5V and 6V output. Consult the physical unit for any jumpers or switches used to select the desired voltage. Ensure the selected voltage is compatible with your receiver and servos.
5. Iṣagbesori to ni aabo: Mount the BEC securely within your aircraft using double-sided tape or a similar method, ensuring it is protected from vibration and potential damage.

Image: Close-up of the E-flite 3 AMP 5V 6V BEC (EFLA950), highlighting the input and output connectors for installation reference.

5. Isẹ

Once installed, the BEC operates automatically to provide a stable voltage to your receiver and servos. Before each use, perform a pre-flight check:

• Agbara Tan: Connect your main flight battery. The BEC will power up the receiver and servos.
• Ṣayẹwo iṣẹ: Verify that all servos respond correctly to control inputs from your transmitter. Check for smooth movement and proper centering.
• Voltage Iduroṣinṣin: If possible, use a voltage meter to confirm the output voltage from the BEC is stable and matches your selected 5V or 6V setting.
• Ṣayẹwo Ooru: After a short period of operation, carefully check the BEC for excessive heat. While some warmth is normal, extreme heat may indicate an overload or issue.

The BEC is designed to handle up to 3 amps of continuous current, which is sufficient for most standard RC aircraft setups. Avoid exceeding this current rating to prevent damage or failure.

6. Itọju

The E-flite BEC requires minimal maintenance to ensure reliable performance:

• Ayẹwo igbagbogbo: Periodically inspect the BEC and its wiring for any signs of damage, fraying, or loose connections.
• Mimọ: Keep the unit free from dust, dirt, and moisture. Use a soft, dry brush or cloth for cleaning.
• Ibi ipamọ: Store the BEC in a dry, cool environment away from direct sunlight and extreme temperatures when not in use.

7. Laasigbotitusita

If you encounter issues with your E-flite BEC, consider the following troubleshooting steps:

• No Power to Receiver/Servos:
  • Check all input and output connections for proper seating and polarity.
  • Ensure the main flight battery is charged and connected correctly to the BEC input.
  • Verify the BEC's voltage selection (5V/6V) is set appropriately.
  • Test the BEC with a different power source or receiver if available to isolate the problem.
• Intermittent Power/Brownouts:
  • This can indicate the BEC is being overloaded. Check the current draw of your servos, especially under load.
  • Ensure all connections are solid and free from corrosion.
  • Consider if the BEC's 3 AMP rating is sufficient for your setup. High-torque or numerous servos may require a higher-rated BEC.
• BEC is Hot:
  • Some warmth is normal, but excessive heat suggests an overload. Reduce the load on the BEC or consider a higher-rated unit.
  • Ensure adequate airflow around the BEC if it's enclosed.

If problems persist, contact Horizon Hobby customer support for further assistance.

8. Atilẹyin ọja ati Support

This E-flite product is manufactured by Horizon Hobby, LLC. For warranty information, technical support, or service inquiries, please refer to the official Horizon Hobby webaaye tabi kan si atilẹyin alabara wọn taara.

O ti wa ni iṣeduro lati da idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Olupese: Ifisere Horizon

Webojula: www.horizonhizy.com