Ọrọ Iṣaaju
This manual provides essential information for the setup, operation, and maintenance of your Numark Scratch 2-channel DJ Mixer and the included SoundSwitch DMX Micro Interface. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your experience.
Package Awọn akoonu
- Numark Scratch DJ Mixer
- SoundSwitch DMX Micro Interface
- Okun USB
- Adapter agbara
- Software Download Cards (Serato DJ Pro, SoundSwitch)
- Afowoyi Olumulo (iwe-ipamọ yii)
- Aabo & Iwe atilẹyin ọja
Image: The Numark Scratch DJ Mixer shown alongside the SoundSwitch DMX Micro Interface and a DMX cable, representing the complete package contents.
Ṣeto
Follow these steps to set up your Numark Scratch mixer and SoundSwitch DMX Micro Interface.
- Asopọ agbara: Connect the included power adapter to the Numark Scratch mixer and then to a power outlet.
- USB Connection (Mixer): Connect the Numark Scratch mixer to your computer using a USB cable. This connection enables control of Serato DJ Pro and audio routing.
- Awọn igbewọle Audio: Connect your turntables or media players to the LINE/PHONO inputs on the rear panel. Ensure the PHONO/LINE switch for each channel is set correctly according to your source.
- Awọn abajade Audio: Connect the MASTER output (XLR or RCA) to your sound system. Connect the BOOTH output (RCA) to your booth monitors if applicable.
- Iṣawọle gbohungbohun: If using a microphone, connect it to the MIC input on the front panel.
- Agbekọri: Connect your headphones to the 1/4" or 1/8" headphone jacks on the front panel.
- SoundSwitch DMX Micro Interface Connection: Connect the SoundSwitch DMX Micro Interface to an available USB port on your computer.
- DMX Lighting Connection: Connect a standard DMX cable from the SoundSwitch DMX Micro Interface to your DMX-compatible lighting fixtures.
- Fifi sori ẹrọ software: Install Serato DJ Pro and SoundSwitch software on your computer. Follow the instructions provided with your software download cards.
Aworan: Angled view of the Numark Scratch DJ Mixer, illustrating its overall design and various connection points on the rear and top panels.
Awọn ilana Iṣiṣẹ
Numark Scratch Mixer Controls
Àwòrán: Àkójọpọ̀ àlàyé tó ṣe kedere view of the Numark Scratch mixer's top panel, highlighting the various knobs, faders, performance pads, and effect controls.
- Àwọn Kọ́nù Jèrè: Ṣatunṣe ipele titẹ sii fun ikanni kọọkan.
- EQ Knobs (Treble, Mid, Bass): Control the high, mid, and low frequencies for each channel.
- Filter Knobs: Apply high-pass or low-pass filters to each channel.
- Awọn Faders ikanni: Control the volume of each channel.
- InnoFader Crossfader: The central fader for blending between channels. Features reverse and slope controls for customization.
- Yipada Yipada: Flips the crossfader's left/right assignment.
- Slope Control: Adjusts the crossfader's curve from a smooth blend to a sharp cut.
- FX Select Buttons: Choose from 6 direct access effects (Echo, Delay, Flanger, Reverb, V. Echo, Phaser).
- Paddle Launch Triggers: Activate and hold selected effects.
- Dry/Wet FX Control: Adjust the intensity of the applied effect.
- Loop Knobs: Create instant loops of various lengths.
- Awọn paadi Iṣe: Access cue points, rolls, and samples within Serato DJ Pro. Use the Ipo paadi button to cycle through different functions.
- Iwọn Titunto: Controls the overall output level to your main sound system.
- Iwọn didun agọ: Controls the output level to your booth monitors.
- Headphone Cue/Mix: Adjusts the balance between the cued channel and the master output in your headphones.
- Ere Agbekọri: Adjusts the overall volume of your headphones.
SoundSwitch DMX Micro Interface Operation
The SoundSwitch DMX Micro Interface integrates with Serato DJ Pro to synchronize lighting effects with your music.
Image: The Numark Scratch mixer displayed with 'SoundSwitch Ready' text, emphasizing its compatibility and seamless integration with the SoundSwitch lighting software.
- Iṣọkan Software: Once connected and SoundSwitch software is running, the interface will automatically detect and control your DMX lighting fixtures.
- Imọlẹ Aifọwọyi: SoundSwitch can analyze your music and generate automated lighting scenes.
- Custom Lighting Displays: Use the SoundSwitch software to design and program custom lighting sequences that respond to your DJ performance.
- Atọka LED buluu: The blue LED on the interface indicates a successful connection and data transmission.
Itoju
Itọju to peye yoo rii daju pe ẹrọ rẹ yoo pẹ to ati pe yoo ṣiṣẹ daradara.
- Ninu: Use a soft, dry cloth to clean the exterior of the mixer and interface. Avoid abrasive cleaners or solvents.
- Idaabobo eruku: Jeki ẹyọ naa bo nigbati ko si ni lilo lati ṣe idiwọ ikojọpọ eruku.
- Iṣakoso USB: Rii daju pe gbogbo awọn kebulu ti ṣeto daradara ati kii ṣe labẹ igara lati yago fun ibajẹ.
- Ibi ipamọ: Tọju ẹyọ naa ni itura, aye gbigbẹ kuro lati orun taara ati awọn iwọn otutu to gaju.
- Crossfader Maintenance: The InnoFader is designed for durability. If cleaning is required, consult a qualified technician or refer to specific InnoFader maintenance guidelines.
Laasigbotitusita
Ti o ba pade awọn iṣoro, tọka si awọn solusan ti o wọpọ wọnyi:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si idajade ohun | Incorrect cable connections, volume levels too low, incorrect input selection. | Verify all audio cables are securely connected. Check Master, Booth, and Channel volume knobs. Ensure PHONO/LINE switches are set correctly. Check audio settings in Serato DJ Pro. |
| Serato DJ Pro not recognizing mixer | USB cable issue, driver not installed, software not updated. | Try a different USB port or cable. Ensure Serato DJ Pro is updated to the latest version. Reinstall drivers if necessary. |
| SoundSwitch lighting not working | DMX cable issue, interface not connected, software not running, lighting fixtures not powered. | Check DMX cable connections. Ensure SoundSwitch DMX Micro Interface is connected to USB and its blue LED is active. Verify SoundSwitch software is running and configured correctly. Ensure lighting fixtures are powered on and in DMX mode. |
| Crossfader not responding correctly | Crossfader reverse or slope settings, physical obstruction. | Check the crossfader reverse and slope switches. Ensure no debris is obstructing the fader. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Numark |
| Awoṣe | Bibẹrẹ |
| Nọmba ti awọn ikanni | 2 |
| Agbelebu | InnoFader with reverse and slope control |
| Awọn ipa | 6 direct access effects (Echo, Delay, Flanger, Reverb, V. Echo, Phaser) |
| Asopọmọra Technology | USB |
| Ni wiwo Hardware | USB |
| O wu Asopọmọra Iru | USB Type B, XLR, RCA |
| Orisun agbara | Okun Itanna |
| Software to wa | Serato DJ Pro (with DVS License), SoundSwitch |
Alaye atilẹyin ọja
Numark products are designed for reliability and performance. This product is covered by a limited warranty. For detailed warranty terms and conditions, please refer to the separate Warranty and Safety Manual included with your product or visit the official Numark webojula.
Pataki: Keep your proof of purchase. It will be required for any warranty service.
Atilẹyin
For technical support, product registration, or to download the latest software and drivers, please visit the official Numark support webojula:
You can also find frequently asked questions (FAQs) and community forums on the support page.
