1. Ifihan
Thank you for choosing the STEALTH SAUQ-1105 1 Gallon Air Compressor. This ultra-quiet, oil-free compressor is designed for a variety of applications, including drilling, nailing, grinding, and inflation. Its lightweight and portable design, coupled with a powerful 1/2 HP induction motor, makes it an ideal tool for both professional and home use. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your air compressor.
olusin 1.1: Iwaju view of the STEALTH SAUQ-1105 Air Compressor, showing the tank, regulator, and tool gauges.
2. Alaye Aabo pataki
WARNING: Failure to read and follow the operator's manual, all warnings, and operating instructions could result in death or serious injury.
2.1 Risk of Bursting
- Ensure the compressor outlet pressure is set lower than the maximum pressure rating of the spray gun or tool being used. Do not exceed 125 PSI.
- Do not weld or drill into the air tank. Any modification to the tank can compromise its structural integrity.
- Drain water from the tank after each use to prevent corrosion and maintain tank integrity.
2.2 Risk of Fire or Explosion
- Do not spray flammable or combustible liquids or paints near sparks, flames, pilot lights, or other ignition sources.
- Operate the compressor in a well-ventilated area. Keep the compressor at least 20 feet away from the spray area.
- Do not smoke while operating the compressor or using air tools.
2.3 Ewu ti Electric mọnamọna
- Always connect the compressor to a properly grounded outlet.
- Do not operate the compressor in wet conditions or with wet hands.
2.4 Risk of Moving Parts
- Pa ọwọ, ẹsẹ, ati aṣọ kuro lati awọn ẹya gbigbe.
- Ensure the compressor is turned off and unplugged before performing any maintenance.
3. Ọja irinše
Familiarize yourself with the key components of your STEALTH SAUQ-1105 Air Compressor:
- 1. Dual Gauges: Easy-to-read gauges display both tank pressure and regulated tool pressure.
- 2. Oil-Free Pump: Provides high performance and durability with less maintenance.
- 3. Cord Wrap Storage: Convenient hooks for wrapping the 6-foot power cord for easy storage and transport.
- 4. Rubber Pads: Located on the feet to reduce vibration and enhance stability during operation.
- 5. Air Pressure Regulator: Allows you to easily adjust the air pressure delivered to your tools.
- 6. Quick Connect Coupler: For easy and secure connection of air hoses and tools.
- 7. Drain Valve: Located at the bottom of the tank for easy removal of moisture after use.
- 8. Induction Motor: A durable and ultra-quiet motor designed for long life and efficient operation.
- 9. Thermal Overload Protector: Automatically shuts down the motor if it overheats to prevent damage.
Figure 3.1: Diagram illustrating the main components of the SAUQ-1105 Air Compressor.
Olusin 3.2: Pariview of key features and dimensions of the 1 Gallon Air Compressor.
4. Eto
Follow these steps to set up your air compressor for first use:
- Ṣii silẹ: Fara yọ konpireso kuro ninu apoti rẹ. Ṣayẹwo fun eyikeyi bibajẹ sowo.
- Ibi: Place the compressor on a firm, level surface in a clean, well-ventilated area. Ensure the rubber feet are making full contact with the surface to minimize vibration.
- Asopọ agbara: Connect the 6-foot power cord to a grounded 120-volt AC outlet. The compressor is designed for an easy cold start, requiring only 2.8 amps.
- So okun Afẹfẹ: Connect your air hose to the quick connect coupler on the compressor. Ensure a secure connection.
- Attach Air Tool: Connect your desired air tool (e.g., nailer, drill, inflator) to the other end of the air hose.
Video 4.1: This video demonstrates the general setup and use of a Stealth air compressor, including connecting an air hose and tool. While the video title mentions a 2-gallon model, the principles shown are applicable to the 1-gallon SAUQ-1105.
5. Awọn ilana Iṣiṣẹ
Operating your STEALTH SAUQ-1105 Air Compressor is straightforward:
- Agbara Tan: Turn on the compressor using the power switch. The motor will start and begin to fill the tank. The tank gauge will show the increasing titẹ.
- Ṣeto Ipa: Once the tank is full (up to 125 PSI), use the air pressure regulator knob to set the desired working pressure for your tool. Observe the tool gauge to ensure the correct pressure is set.
- Bẹrẹ Iṣẹ: You can now operate your air tool. The compressor will automatically cycle on and off to maintain the set pressure in the tank as you use air.
- Awọn ohun elo: This compressor is suitable for various tasks including:
- Liluho: Powering air drills for various materials.
- Nailing/Brad Nailing: Ideal for finishing nailers and brad nailers for trim work and small projects.
- Lilọ: For light grinding tasks with appropriate air grinders.
- Iye owo: Inflating tires, sports equipment, and other inflatables.
- Agbara Pa: When finished, turn off the compressor and disconnect the air hose and tools.
Figure 5.1: The SAUQ-1105 Air Compressor is suitable for a wide range of applications, including drilling, nailing, and inflation.
Figure 5.2: Demonstrating the use of the compressor for tire inflation.
Figure 5.3: The portable design allows for use in various settings, including job sites for tasks like framing.
6. Itọju
The STEALTH SAUQ-1105 features an oil-free pump, significantly reducing maintenance requirements. However, regular care is still essential for optimal performance and longevity:
- Omi Sisan Lojoojumọ: After each use, or at least daily, open the drain valve at the bottom of the tank to release any accumulated moisture. This prevents rust and extends the life of the tank.
Figure 6.1: The drain valve is used to remove moisture from the air tank after the compressor is shut off.
- Ajọ Afẹfẹ mimọ: Periodically check and clean the air filter to ensure proper airflow and prevent dust from entering the motor.
- Ṣayẹwo Hoses ati awọn isopọ: Regularly check air hoses for cracks or leaks and ensure all connections are tight.
- Tọju daradara: Tọju konpireso sinu mimọ, agbegbe gbigbẹ nigbati ko si ni lilo.
7. Laasigbotitusita
If you encounter issues with your STEALTH SAUQ-1105 Air Compressor, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Compressor ko bẹrẹ. | No power; Thermal overload activated; Faulty switch. | Check power connection and outlet; Allow compressor to cool down and press reset button; Contact support. |
| Kọ̀mpútà máa ń ṣiṣẹ́ nígbà gbogbo tàbí ó máa ń yípo nígbà gbogbo. | Air leak in hose or connections; Drain valve open; Pressure switch malfunction. | Check all connections for leaks and tighten; Ensure drain valve is closed; Contact support. |
| Low air pressure at tool. | Regulator set too low; Air leak; Tool requires more CFM than compressor provides. | Adjust regulator to higher pressure; Check for leaks; Ensure tool is compatible with compressor's CFM output. |
| Ariwo pupọ tabi gbigbọn. | Loose components; Uneven surface; Damaged motor/pump. | Check and tighten any loose parts; Place on a firm, level surface; Contact support if noise persists. |
olusin 7.1: Apa view of the compressor, highlighting the location of the reset button for the thermal overload protector.
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Lilọ ni ifura |
| Orukọ awoṣe | SAUQ-1105 |
| Iwọn ojò | 1 galonu |
| Agbara Agbara Agbara | 0.5 HP |
| Iwọn Iṣiṣẹ ti o pọju | 125 PSI |
| Air Sisan Agbara | 0.8 CFM @ 90 PSI, 1.3 CFM @ 40 PSI |
| Ariwo Ipele | 60 dB (Ipajẹ Ultra) |
| Orisun agbara | Okun Itanna |
| Voltage | 120 Volts |
| Wattage | 360 watt |
| Iwọn Nkan | 26.4 iwon |
| Ọja Mefa | 16"L x 14.1"W x 11.1"H |
| Okun Gigun | 6 Ẹsẹ |
| Pataki Ẹya | Lightweight, Oil-Free, Cold Start |
| Ohun elo | Alloy Steel (Q235B Steel) |
Figure 8.1: The induction motor contributes to the ultra-quiet operation, with a noise level of less than 58dB.
Figure 8.2: Chart indicating the compatibility of the compressor with various air tools for continuous and intermittent use.
9. Atilẹyin ọja ati Support
Your STEALTH SAUQ-1105 Air Compressor comes with a S'aiye Atilẹyin ọja LimitedÀtìlẹ́yìn yìí bo àbùkù nínú àwọn ohun èlò àti iṣẹ́ ọwọ́ nígbà tí a bá ń lò ó déédéé. Jọ̀wọ́ wo káàdì àtìlẹ́yìn tí ó wà pẹ̀lú ọjà rẹ fún gbogbo òfin àti àdéhùn.
For technical support, warranty claims, or replacement parts, please contact Stealth customer service. You can also visit the official Stealth store for more information and product resources:
