Ìwé Ìtọ́sọ́nà Olùlò Maxell MC-EX3551 3LCD Pílánẹ́ẹ̀tì

1. Ifihan

This manual provides essential instructions for the safe and efficient operation of your Maxell MC-EX3551 3LCD Projector. Please read this manual thoroughly before using the projector and retain it for future reference. The Maxell MC-EX3551 is a high-performance 3LCD projector designed for clear and vibrant presentations with 3700 ANSI lumens brightness and XGA (1024 x 768) resolution.

2. Alaye Aabo

Ṣe akiyesi awọn iṣọra ailewu atẹle lati ṣe idiwọ ina, mọnamọna, tabi ipalara.

• Má ṣe dí àwọn ihò afẹ́fẹ́. Rí i dájú pé àyè tó wà ní àyíká ẹ̀rọ ìfihàn náà fún afẹ́fẹ́ tó yẹ.
• Ma wo taara sinu pirojekito lẹnsi nigbati awọn lamp is on. The bright light can damage your eyes.
• Do not place the projector on an unstable cart, stand, or table. It may fall, causing serious injury and damage.
• Do not expose the projector to rain or moisture to reduce the risk of fire or electric shock.
• Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye. Maṣe gbiyanju lati ṣii tabi tun pirojekito naa funrararẹ.
• Lo okùn agbára tí a pèsè pẹ̀lú ẹ̀rọ ìṣiṣẹ́ tàbí èyí tí a fọwọ́ sí nìkan.

3. Package Awọn akoonu

Daju pe gbogbo awọn nkan ti a ṣe akojọ rẹ si isalẹ wa ninu package rẹ:

• Maxell MC-EX3551 3LCD Projector
• Okun agbara
• Isakoṣo latọna jijin pẹlu awọn batiri
• Okun VGA
• Afowoyi Olumulo (iwe-ipamọ yii)
• Calibration of device, testing with picture alignment and focus (as per product information)

4. Ọja Ipariview

Mọ ara rẹ pẹ̀lú onírúurú ẹ̀yà ara àti ìsopọ̀ ti ẹ̀rọ ìṣiṣẹ́ rẹ.

olusin 4.1: Iwaju View. This image displays the front of the Maxell MC-EX3551 projector, highlighting the main projection lens. The lens is centrally located, allowing for image output.

olusin 4.2: Top View. This image shows the top panel of the projector, featuring the control buttons for power, input selection, and menu navigation. The focus and zoom adjustment rings are also visible near the lens area.

olusin 4.3: Apa View. This image illustrates one side of the projector, displaying prominent ventilation grilles for heat dissipation and two audio input ports.

olusin 4.4: Ẹyìn View. Aworan yii pese alaye kan view of the rear panel, showcasing all available input and output ports including COMPUTER IN 1 (VGA), CONTROL (RS-232C), USB Type B, USB Type A, HDMI 1, HDMI 2, LAN, AUDIO IN 3 (RCA), VIDEO, and the AC power inlet.

5. Eto

5.1 Pirojekito Placement

Place the projector on a stable, level surface or mount it securely to a ceiling. Ensure the projector is positioned at an appropriate distance from the screen to achieve the desired image size. Refer to the projection distance chart (not included in this manual, typically found in a separate setup guide) for optimal placement.

5.2 Awọn ẹrọ Nsopọ

Connect your source devices (e.g., laptop, Blu-ray player) to the projector using the appropriate cables.

• HDMI: For digital video and audio, connect an HDMI cable from your source device to either HDMI 1 or HDMI 2 ibudo lori pirojekito.
• VGA: For analog video, connect a VGA cable from your computer to the KỌMPUTA IN 1 ibudo.
• Lan: For network control and monitoring, connect an Ethernet cable to the LAN ibudo.
• Ohun: Connect external audio sources to the AUDIO NI awọn ibudo bi ti nilo.
• Agbara: Connect the supplied power cord to the projector's AC inlet and then to a power outlet.

6. Ṣiṣẹ Pirojekito

6.1 Agbara Tan / Pa

• Lati mu agbara ṣiṣẹ, tẹ bọtini naa Iduroṣinṣin/ON bọ́tìnì lórí pánẹ́lì ìṣàkóso tàbí ìṣàkóso latọna jijin. Àmì agbára náà yóò tànmọ́lẹ̀.
• Lati pa agbara, tẹ awọn Iduroṣinṣin/ON button again. A confirmation message may appear; press the button a second time to confirm shutdown. Allow the projector to cool down before unplugging.

6.2 Aṣayan Orisun Input

Tẹ awọn ÀWỌN Ọ̀RỌ̀ button on the control panel or remote control to cycle through available input sources (HDMI 1, HDMI 2, Computer 1, Video, etc.) until your desired source is displayed.

6.3 Aworan Atunṣe

• Idojukọ: Yiyi awọn Idojukọ ring on the lens until the image is sharp and clear.
• Sun-un: Yiyi awọn Sún ring on the lens to adjust the image size.
• Atunse okuta bọtini: Ti aworan ba han trapezoidal, lo iṣẹ atunṣe bọtini bọtini ninu akojọ aṣayan pirojekito lati ṣe onigunba aworan naa.

6.4 Lilọ kiri Akojọ aṣyn

Tẹ awọn Akojọ button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate through options and the WOLE Tẹ bọtini lati yan. Akojọ lẹẹkansi lati jade.

7. Itọju

Itọju deede ṣe idaniloju iṣẹ ṣiṣe to dara julọ ati fa igbesi aye pirojekito rẹ pọ si.

• Fifọ lẹnsi: Gently wipe the lens with a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive cleaners.
• Afẹfẹ Fifọ ati Rirọpo: Periodically clean the air filter to prevent dust buildup, which can affect cooling and image quality. Refer to the projector's on-screen menu for filter usage time. Replace the filter when necessary.
• Lamp Itọju: Awọn lamp ni ipari igbesi aye. Nigbati lamp indicator lights up or a message appears, it's time to replace the lamp. Always use genuine Maxell replacement lamps.
• Ode Ninu: Mu ese pirojekito nu pẹlu asọ ti o gbẹ. Fun idoti alagidi, lo die-die damp asọ ati ohun elo tutu, lẹhinna mu ese gbẹ.

8. Laasigbotitusita

Ti o ba pade awọn ọran, tọka si awọn iṣoro ti o wọpọ ati awọn ojutu wọnyi:

9. Awọn pato

10. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Maxell website. Do not attempt to service the projector yourself, as this may void your warranty.

For further assistance, contact Maxell customer support through their official channels.