1. Ifihan
This manual provides detailed instructions for the safe and proper installation and operation of your Pipishell PIMF4 Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent potential injury or damage. Keep this manual for future reference.
2. Alaye Aabo
Always ensure the wall structure can support the combined weight of the mount and your television. If you are unsure about the strength of your wall, consult a qualified professional. Do not exceed the maximum weight capacity of 99 lbs (45 kg). This mount is designed for installation on 12" or 16" wood studs, solid concrete, or brick walls. Do not install on drywall alone. Always use appropriate safety gear during installation.
3. Package Awọn akoonu
Verify that all components are present and undamaged before installation. The package includes the full motion TV wall mount, various mounting hardware (screws, anchors, washers), and a step-by-step instruction guide. If any parts are missing or damaged, please contact customer service.
4. Awọn pato
| Nọmba awoṣe | PIMF4 |
| Ibaramu Iwọn TV | 26-65 inches |
| Agbara iwuwo | Titi di 99 lbs (45 kg) |
| VESA ibamu | 100x100mm to 400x400mm |
| Iṣagbesori Iru | Full išipopada Wall Mount |
| Iṣipopada Iru | Articulating, Swivel, Tilt, Level |
| Swivel Ibiti | +/-45° |
| Titẹ Range | +5°/-15° |
| Atunse Ipele | +/-3° |
| Itẹsiwaju lati Wall | 3.7" si 16.42" |
| Ohun elo | Alloy Irin |
| Àwọ̀ | Dudu |
5. Ayẹwo ibamu
Before installation, confirm your TV's compatibility with the Pipishell PIMF4 mount.
- Iwon TV: Compatible with most 26-65 inch flat or curved TVs.
- Iwọn TV: Ṣe atilẹyin fun awọn TV ti o to 99 lbs (45 kg).
- Ilana VESA: Check the four mounting holes on the back of your TV. The distance between these holes (width x height) must be between 100x100mm and 400x400mm.
- Odi Iru: Designed for installation on 12" or 16" wood studs, solid concrete, or brick walls.
- TV Ports: Ensure the mount will not block any necessary TV ports or cables.
Aworan: Ibamu loriview for Pipishell TV Wall Mount, showing supported TV sizes (26-65in), VESA patterns (Max 400x400mm, Min 100x100mm), and wall types (12"/16" Wood Studs).
Image: Illustration advising users to locate TV ports to ensure the mount does not block cables.
6. Itọsọna fifi sori ẹrọ
Follow these steps for a secure and successful installation. It is recommended to have two people for TV mounting.
Igbesẹ 1: So awọn bracket TV pọ mọ
Secure the TV brackets to the back of your television using the appropriate screws and washers provided. Ensure the brackets are centered and firmly attached.
Image: Step 1 of installation, showing how to attach the TV brackets to the television.
Igbesẹ 2: Fi Awo Odi sori ẹrọ
Locate the desired mounting position on your wall. Use a stud finder to identify wood studs if applicable. Mark the drill holes and pre-drill according to the instructions. Secure the pre-assembled wall plate to the wall using the provided lag bolts and washers. Ensure it is level and securely fastened.
Image: The pre-assembled wall plate, ready for mounting, highlighting its design for easy installation.
Image: Step 2 of installation, demonstrating the process of installing the wall plate.
Step 3: Hang TV
Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the mount. Engage any safety locks or screws to prevent accidental dislodgement.
Image: Step 3 of installation, showing how to hang the TV onto the wall mount.
Fidio fifi sori ẹrọ
Video: Official Pipishell demonstration of the full motion TV mount's features and installation process.
7. Ṣiṣẹ ati Awọn atunṣe
The Pipishell PIMF4 mount offers various adjustments for optimal viewing.
- Itẹsiwaju ati ifẹhinti: Gently pull the TV away from the wall to extend it up to 16.42 inches for closer viewing. Push the TV back towards the wall to retract it to 3.7 inches to save space.
- Swivel: The mount allows for a +/-45° swivel from left to right. Carefully push or pull the TV to the desired angle.
- Tẹ: Ṣatunṣe inaro viewing angle with a +5°/-15° tilt range. Loosen the tilt adjustment screws, set the desired angle, and re-tighten the screws.
- Ìpele: After installation, fine-tune the TV's horizontal level by +/-3°. This can be done by adjusting the leveling screws on the TV brackets.
Image: Visual guide to the mount's adjustable features including extension, retraction, tilt (+5°/-15°), and level (±3°).
Video: Official Pipishell video demonstrating the full motion capabilities, including swivel, tilt, and extension of the TV wall mount.
8. Itọju
Itọju deede ṣe idaniloju gigun ati iṣẹ ailewu ti oke ogiri TV rẹ.
- Ayewo Igbakọọkan: Lokọọkan ṣayẹwo gbogbo awọn skru ati awọn asopọ lati rii daju pe wọn wa ni wiwọ ati aabo.
- Ninu: Nu oke naa pẹlu asọ ti o gbẹ. Yago fun lilo abrasive afọmọ tabi olomi ti o le ba awọn ipari.
- Ṣayẹwo gbigbe: Occasionally move the TV through its full range of motion to ensure smooth operation of the articulating arms.
9. Laasigbotitusita
If you encounter any issues with your TV wall mount, refer to the following common solutions:
- TV Ko Ipele: Use the +/-3° leveling adjustment feature to correct the horizontal alignment. Ensure all mounting screws are tightened evenly.
- Ìṣòro láti gbé TV: Check for any obstructions or overtightened joints. Lubricate moving parts if necessary with a silicone-based spray (avoid oil-based lubricants).
- Òkè Nìmọ̀ Ńlá: Immediately remove the TV and re-check all wall plate and TV bracket connections. Ensure lag bolts are securely fastened into studs or concrete. Do not use the mount if it feels unstable.
10. Atilẹyin ọja ati Onibara Support
Pipishell is committed to providing professional customer service. If you have any questions regarding the installation, product selection, or require assistance, please do not hesitate to contact our U.S.-based product support team. Refer to your product packaging or the official Pipishell webaaye fun awọn alaye olubasọrọ.
