ELIWELL EWRC 500 NT HACCP Electronic Controller User Manual

1. Ifihan

This manual provides comprehensive instructions for the installation, operation, and maintenance of the ELIWELL EWRC 500 NT HACCP Electronic Controller, Model RCS3UDTX20700. This device is designed for precise temperature regulation in industrial and commercial applications, particularly those requiring HACCP compliance. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.

2. Alaye Aabo

Nigbagbogbo ṣe akiyesi awọn iṣọra aabo wọnyi:

• Fifi sori ẹrọ ati itọju gbọdọ jẹ nipasẹ oṣiṣẹ ti o peye nikan.
• Ge asopọ agbara ṣaaju ṣiṣe eyikeyi onirin tabi itọju.
• Ensure the power supply matches the controller's specifications (230V).
• Protect the device from water, moisture, and extreme temperatures.
• Maṣe ṣii casing unless specifically instructed to do so by the manufacturer.
• Tẹle gbogbo awọn koodu itanna agbegbe ati ilana.

3. Ọja Ipariview

The ELIWELL EWRC 500 NT is an advanced electronic controller featuring a digital display and intuitive button interface for easy parameter adjustment and monitoring. It is specifically designed for applications requiring HACCP protocol adherence.

olusin 3.1: Iwaju view of the ELIWELL EWRC 500 NT HACCP Electronic Controller.

This image displays the front panel of the ELIWELL EWRC 500 NT HACCP Electronic Controller. The device is housed in a light grey, rectangular enclosure. The front panel features a dark grey rectangular display area with a digital readout, likely showing temperature or operational status. Below the display, the word "COLDFACE" is visible. To the right of the display, there are several control buttons arranged vertically. From top to bottom, these include: an "ESC" button with a snowflake icon, a "SET" button, a button with a light bulb icon, an "AUX" button with a down arrow, and an orange circular power button with a vertical line and circle icon. Above the "AUX" button, there is an up arrow button with a fan icon. The "eliwell" brand logo is visible in the upper left corner of the dark grey display area. The overall design suggests a robust and functional industrial control unit.

4. fifi sori

4.1 Iṣagbesori

The controller is designed for panel mounting with dimensions of 213x318mm. Ensure adequate ventilation around the unit to prevent overheating. Secure the controller using the provided mounting clips or screws, ensuring a snug fit to prevent vibration.

4.2 Onirin

All wiring must comply with local and national electrical codes. Use appropriate gauge wires for the power supply and load connections. Refer to the wiring diagram below for correct terminal connections.

Note: A detailed wiring diagram is typically provided on the device itself or in a separate technical sheet. For specific terminal assignments, consult the product's technical documentation.

Awọn Itọsọna Wire Gbogboogbo:

• Connect the 230V AC power supply to the designated power input terminals.
• Connect temperature probes to the sensor input terminals.
• Connect controlled loads (e.g., compressors, fans, heaters) to the relay output terminals.
• Rii daju pe gbogbo awọn asopọ wa ni aabo ati idabobo.

5. Eto

After successful installation and wiring, proceed with the initial setup:

1. Agbara Tan: Apply power to the controller. The display will illuminate, and the unit will perform a self-test.
2. Ifihan akọkọ: The display will typically show the current temperature reading from the primary probe.
3. Accessing Parameters: Tẹ mọlẹ SET button for a few seconds to enter the parameter configuration menu.
4. Lilọ kiri: Lo awọn Up ati Isalẹ arrow buttons to scroll through parameters.
5. Ṣíṣàtúnṣe Àwọn Ìwọ̀n: Tẹ SET to select a parameter, use Up/Isalẹ lati yi iye rẹ pada, lẹhinna tẹ SET lẹẹkansi lati jẹrisi.
6. Ijade Akojọ: Tẹ awọn ESC button to exit the parameter menu and return to the main display.

6. Awọn ilana Iṣiṣẹ

6.1 Ipilẹ isẹ

Once configured, the controller operates automatically based on the set parameters. The main display continuously shows the measured temperature.

• Viewing Setpoint: Ni soki tẹ awọn SET bọtini lati view the current temperature setpoint. Press ESC lati pada si ifihan akọkọ.
• Manual Defrost (if applicable): Tẹ mọlẹ Dín button (often combined with ESC or a dedicated button with a snowflake icon) to initiate a manual defrost cycle.
• Iṣẹ Iranlọwọ: Awọn AUX button may activate an auxiliary output or function, depending on configuration. Refer to parameter settings for details.

6.2 Parameter Configuration (Advanced)

The EWRC 500 NT offers a wide range of configurable parameters to fine-tune its operation. These include setpoints, differentials, defrost cycles, alarm thresholds, and probe calibration. Access these parameters as described in the "Setup" section.

Consult the detailed parameter list in the full technical manual for specific codes and their functions. Incorrect parameter settings can lead to improper operation or damage.

7. Itọju

Regular maintenance ensures the longevity and accuracy of your controller.

• Ninu: Nu iwaju nronu pẹlu asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
• Awọn ayewo: Ṣe àyẹ̀wò àwọn ìsopọ̀ wáyà lẹ́ẹ̀kọ̀ọ̀kan fún jíjẹ tàbí ìbàjẹ́.
• Probe Check: Verify that temperature probes are securely connected and free from damage.
• Awọn imudojuiwọn sọfitiwia: Ṣayẹwo awọn olupese ká website for any available firmware updates. (Requires specialized tools and knowledge).

All internal maintenance or repairs should only be performed by authorized service personnel.

8. Laasigbotitusita

Apá yìí ń pèsè àwọn ìdáhùn sí àwọn ìṣòro tó wọ́pọ̀. Fún àwọn ìṣòro tí a kò kọ síbí, kan si olùrànlọ́wọ́ ìmọ̀-ẹ̀rọ.

9. Awọn pato

10. Atilẹyin ọja ati Support

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your distributor. Technical support can be obtained through the manufacturer or authorized service centers.

Olupese: Gastroteileshop

ASIN: B07Z5LXQWH