Ọrọ Iṣaaju
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Alaye Aabo
Nigbagbogbo ṣe akiyesi awọn iṣọra ailewu atẹle lakoko fifi sori ẹrọ ati lilo:
- Agbara iwuwo: Má ṣe ju ìwọ̀n tó pọ̀ jù lọ lọ tó jẹ́ 88 lbs (40 kg). Fífi ẹrù jù sílẹ̀ lè fa ìpalára ńlá tàbí ìbàjẹ́ dúkìá.
- Ilana Odi: Ensure the mounting surface (wall) can safely support the combined weight of the mount and the television.
- UL Akojọ: This product is UL Listed, indicating it meets specific safety standards.
- Iranlọwọ Ọjọgbọn: Ti o ko ba ni idaniloju nipa eyikeyi apakan ti ilana fifi sori ẹrọ, kan si alamọja ti o peye.
- Awọn ọmọde: Keep children away from the installation area during setup.
- Awọn irinṣẹ: Use appropriate tools and follow all instructions for their safe operation.
Package Awọn akoonu
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Wall Apejọ
- TV Brackets (2 pieces)
- Various TV Screws (M4, M6, M8)
- Spacers and Washers
- Lag Bolts and Concrete Anchors (for specific wall types)
- Ipele Bubble
- Wrench
- Fifi sori Àdàkọ
Awọn pato
| Nọmba awoṣe | 28XTu2564 |
| Brand | Oke |
| Ibaramu Iwọn TV | 26 to 65 inches |
| Agbara iwuwo | 88 lbs (40 kg) |
| VESA ibamu | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Odi Iru ibamu | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Titẹ Igun | +5° / -13° |
| Igun Swivel | ±45° (Maximum swivel angle depends on TV size) |
| Atunse Ipele | ±3° (Post-installation) |
| Ijinna Odi | 3" si 15.7" |
| Ohun elo | Alloy Irin |
Eto ati fifi sori
Awọn sọwedowo fifi sori ẹrọ tẹlẹ
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Check TV VESA Pattern: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Ṣàyẹ̀wò Irú Ògiri: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Maṣe fi sori ẹrọ lori ogiri gbigbẹ nikan.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Awọn Igbesẹ fifi sori ẹrọ
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Olusin 3: Pariview of the 3-Step Easy Installation Process.
Igbesẹ 1: So awọn akọmọ mọ TV
- Farabalẹ gbe oju TV rẹ si isalẹ lori rirọ, dada mimọ lati ṣe idiwọ ibajẹ iboju.
- Align the TV brackets with the mounting holes on the back of your TV.
- Yan awọn skru ti o yẹ, awọn fifọ, ati awọn alafo lati inu ohun elo ohun elo ti o baamu awọn ihò iṣagbesori TV rẹ.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
Igbesẹ 2: So Awo Odi si Odi
- Pinnu giga ati ipo ti o fẹ fun TV rẹ.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- Pẹ̀lú ìrànlọ́wọ́, gbé TV náà pẹ̀lú àwọn brackets tí a so mọ́ ọn dáadáa kí o sì so wọ́n mọ́ àwo ògiri.
- Ensure the TV is securely seated on the wall plate.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Awọn ilana Iṣiṣẹ
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewing awọn igun.
Títúnṣe Viewigun igun
- Tẹ: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewinu itunu.
- Swivel: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewing lati orisirisi awọn agbegbe ti awọn yara.
- Itẹsiwaju: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Ìpele: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Itoju
Itọju deede ṣe iranlọwọ rii daju igbesi aye gigun ati iṣẹ ailewu ti oke odi TV rẹ.
- Ninu: Mu ese kuro pẹlu asọ ti o tutu, ti o gbẹ lati yọ eruku kuro. Yago fun lilo abrasive ose tabi epo.
- Awọn ayẹwo igbakọọkan: Lokọọkan ṣayẹwo gbogbo awọn skru ati awọn boluti lati rii daju pe wọn wa ni wiwọ. Tun-mu ti o ba wulo.
- Gbigbe: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Laasigbotitusita
If you encounter issues during or after installation, consider the following common solutions:
- TV Ko Ipele: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Òkè Nìmọ̀ Ńlá: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Iṣoro Iṣatunṣe: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Awọn ẹya ti o padanu: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Atilẹyin ọja ati Support
MOUNTUP TV wall mount series are backed by a Ètò ààbò ọdún mẹ́ta. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual:
