Ọrọ Iṣaaju
The Mesqool CR1008i Loud Alarm Clock is designed to provide a reliable wake-up experience for heavy sleepers and individuals with hearing impairment. It features multiple alarm modes, a large LED display with adjustable brightness, a 7-color nightlight, and convenient dual USB charging ports.
Ohun ti o wa ninu Apoti
- Aago Itaniji ti npariwo
- Ibusun Shaker
- Itọsọna olumulo
- Adapter agbara
- Okun Mita 1.5
Ṣeto
Nfi agbara aago Itaniji
- Connect the provided Power Adapter to the DC 5V IN port on the back of the alarm clock.
- Plug the Power Adapter into a standard electrical outlet. The display will light up.
- For battery backup, open the battery compartment on the back and insert 2 AAA batteries (not included). This will preserve time and alarm settings during a power outage.
Figure 1: Rear panel with power input, USB ports, and battery compartment. Insert 2 AAA batteries for backup power.
Connecting the Bed Shaker
- Plug the Bed Shaker cable into the dedicated vibrator port on the back of the alarm clock.
- Place the bed shaker under your pillow or mattress for effective vibration. The 70.8-inch long cord provides flexibility in placement.
Figure 2: The bed shaker positioned under a pillow for silent, vibrating alarm.
Awọn ilana Iṣiṣẹ
Ṣiṣeto Akoko naa
- Tẹ mọlẹ SET Akoko button on the top panel. The hour digits will begin to flash.
- Lo awọn + or - awọn bọtini lati ṣatunṣe awọn wakati.
- Tẹ SET Akoko lẹẹkansi lati jẹrisi awọn wakati ati ki o gbe si iseju tolesese. Awọn nọmba iṣẹju yoo filasi.
- Lo awọn + or - awọn bọtini lati ṣatunṣe awọn iṣẹju.
- Tẹ SET Akoko akoko kan si lati fi eto akoko pamọ.
- Lati yipada laarin ọna kika wakati 12 ati wakati 24, tẹ bọtini naa 12/24H bọtini.
- To activate or deactivate Daylight Saving Time (DST), press the DST bọtini.
Setting Alarms (AL1 & AL2)
Aago naa n ṣe atilẹyin fun awọn itaniji ominira meji (AL1 ati AL2).
- Tẹ mọlẹ AL1 or AL2 Bọ́tìnì náà. Àwọn nọ́mbà wákàtí ìkìlọ̀ náà yóò máa tàn yanranyanran.
- Lo awọn + or - awọn bọtini lati ṣeto wakati itaniji ti o fẹ.
- Tẹ AL1 or AL2 again to confirm the hour and set the minutes. The alarm minute digits will flash.
- Lo awọn + or - awọn bọtini lati ṣeto awọn iṣẹju itaniji ti o fẹ.
- Tẹ AL1 or AL2 one more time to save the alarm setting.
- To choose the alarm mode (Buzzer, Vibrator, or Both), use the BUZZ/VIB slide switch on the side of the clock.
- To adjust the alarm volume, use the ORO AGBARA slide switch on the side of the clock (Low, Medium, High).
olusin 3: Apa view of the alarm clock with slide switches for selecting alarm mode (Buzzer, Vibrator, or Both) and alarm volume.
Video 1: Demonstrates the Mesqool Loud Alarm Clock with Bed Shaker, showcasing its three awake modes: bed shaker, buzzer, or both.
Išẹ lẹẹkọọkan
- Nigbati itaniji ba ndun, tẹ tobi SNOOZE OK button on the top of the clock to activate snooze. The alarm will pause for 9 minutes.
- Láti pa itaniji náà pátápátá, tẹ ALARM PA bọtini.
Figure 4: The prominent snooze button on top of the alarm clock for easy access.
Night Light & Dimmer
- The alarm clock features a 7-color night light. Press the SNOOZE OK button (which also functions as the light button) to cycle through the 7 colors or turn the night light off.
- The 7-inch LED display has a full slider dimmer (0%-100%). Use the DIMMER slide switch on the side of the clock to adjust the display brightness to your preference.
Figure 5: The alarm clock showcasing its 7-color night light options.
Video 2: Features the digital alarm clock with its 7 colored night light, demonstrating the various color options.
Awọn ibudo gbigba agbara USB meji
- The alarm clock is equipped with two DC 5V/1A output USB charging ports on the back.
- Connect your smartphones, tablets, or other USB-powered devices to these ports for convenient charging.
Figure 6: Two smartphones charging simultaneously using the dual USB ports on the alarm clock.
Itoju
- Clean the alarm clock and bed shaker with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Rii daju pe ẹrọ naa ti yọọ kuro ṣaaju ṣiṣe mimọ.
- Jeki ẹrọ naa kuro ni omi ati ọriniinitutu giga.
Laasigbotitusita
No Display / Power Issue
- Check if the power adapter is securely plugged into both the clock and the wall outlet.
- Rí i dájú pé ihò ìta ògiri náà ń ṣiṣẹ́ dáadáa nípa fífi ẹ̀rọ mìíràn sí i.
- Tí o bá ń lo àfikún batiri, rí i dájú pé àwọn batiri náà wà ní ìsàlẹ̀ dáadáa, kí wọ́n má sì dínkù.
Alarm Not Sounding/Vibrating
- Verify that the alarm (AL1 or AL2) is activated and set to the correct time.
- Ṣayẹwo awọn BUZZ/VIB slide switch to ensure the desired mode (Buzzer, Vibrator, or Both) is selected.
- Ṣatunṣe awọn ORO AGBARA slide switch to a higher setting if the buzzer is too quiet.
- Ensure the bed shaker is properly connected to its port.
Display Too Bright/Dim
- Lo awọn DIMMER slide switch on the side of the clock to adjust the display brightness.
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Mesqool |
| Nọmba awoṣe | CR1008i |
| Ifihan Iru | LED oni-nọmba |
| Iwọn Ifihan | 7 inches |
| Dimmer | 0-100% Full Range Slider |
| Awọn ipo itaniji | Bed Shaker, Buzzer, or Both |
| Imọlẹ alẹ | 7 Awọn awọ |
| Awọn ibudo gbigba agbara USB | 2 (DC 5V/1A output) |
| Batiri Afẹyinti | Awọn batiri AAA 2 x 1.5V (kii ṣe pẹlu) |
| Orisun agbara | Okun Itanna |
| Ọja Mefa | 6.46"L x 3.39"H x 1.93"W |
| Iwọn Nkan | 8 iwon |
