1. Ifihan
This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source F51B0066CP 4-inch Chrome Bathroom Faucet. This faucet features a versatile design suitable for various bathroom aesthetics, durable solid brass construction, and washerless cartridges for reliable, drip-free performance. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product.
Aworan 1: Akọkọ view of the Project Source F51B0066CP 4-inch Chrome Bathroom Faucet. This image displays the faucet's polished chrome finish, the two handles, and the spout, highlighting its compact and elegant design.
2. Alaye Aabo
Maa ṣe akiyesi awọn iṣọra aabo wọnyi nigbagbogbo lakoko fifi sori ẹrọ ati itọju:
- Turn off the main water supply before beginning any work.
- Wọ ohun elo aabo ti ara ẹni ti o yẹ, gẹgẹbi awọn gilaasi ailewu ati awọn ibọwọ.
- Rii daju pe gbogbo awọn asopọ wa ni aabo lati ṣe idiwọ awọn n jo.
- Ti o ko ba ni idaniloju nipa eyikeyi apakan ti fifi sori ẹrọ, kan si alagbawo plumber ti o peye.
- Ma ṣe mu awọn asopọ pọ, nitori eyi le ba faucet tabi paipu jẹ.
3. Package Awọn akoonu
Rii daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- Faucet body with two handles
- Mounting hardware (washers, nuts)
- Hot and cold water supply lines (may be pre-attached or separate)
- Agbejade sisan ijọ
- Awọn ilana fifi sori ẹrọ (ọwọ yii)
4. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Orisun Project |
| Orukọ awoṣe | F51B0066CP |
| Iṣagbesori Iru | Oke dekini |
| Pari Iru | Chrome |
| Ohun elo | Idẹ |
| Nọmba ti Kapa | 2 |
| Iho kika | 3 |
| Iru fifi sori ẹrọ | Centerset |
| Iga Kere | 2.3 inches |
| Spout arọwọto | 4.7 inches |
| Iwọn Nkan | 2.29 iwon |
| UPC | 019934464826 |
5. Fifi sori (Eto)
Tẹ̀lé àwọn ìgbésẹ̀ wọ̀nyí fún fífi sori ẹrọ faucet tuntun rẹ dáadáa:
- Ṣetan Ibẹrẹ: Ensure the sink surface is clean and dry. Remove any old faucet and clean the mounting holes.
- Fi sori ẹrọ Faucet: Place the faucet body onto the sink deck, aligning the hot and cold water supply lines with the corresponding holes. Ensure the gasket or putty is properly seated under the faucet base to prevent leaks.
- Ṣe aabo Faucet naa: From underneath the sink, thread the mounting nuts onto the faucet shanks and tighten them securely by hand. Use a basin wrench if necessary, but do not overtighten.
- So Awọn Laini Ipese Omi: Connect the hot and cold water supply lines from the faucet to the corresponding shut-off valves. Use thread sealant tape on the threads for a watertight seal. Tighten connections with a wrench, being careful not to overtighten.
- Install Pop-Up Drain: Follow the instructions provided with the pop-up drain assembly. Typically, this involves placing the drain body through the sink drain hole, applying plumber's putty or a gasket, and securing it from underneath with a nut. Connect the pivot rod to the lift rod mechanism on the faucet.
- Idanwo fun Leaks: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are present, tighten the connections slightly until they stop.
- Fọ Faucet naa: Remove the aerator from the spout and turn on both hot and cold water for a few minutes to flush out any debris from the lines. Turn off the water, reattach the aerator, and check for proper flow.
Image 2: The Project Source F51B0066CP faucet shown installed on a white bathroom sink, demonstrating its appearance in a typical bathroom setting. The chrome finish reflects the surrounding environment, and the two handles are visible.
6. Isẹ
Your Project Source F51B0066CP faucet features two handles for controlling water flow and temperature:
- The left handle controls the hot water. Turn it counter-clockwise to increase hot water flow.
- The right handle controls the cold water. Turn it counter-clockwise to increase cold water flow.
- Ṣe àtúnṣe àwọn ọwọ́ méjèèjì láti dé ìwọ̀n otutu omi àti ìwọ̀n ìṣàn omi tí o fẹ́.
- To operate the pop-up drain, lift the small rod located behind the faucet spout to close the drain, and push it down to open the drain.
7. Itọju
Regular maintenance will help preserve the finish and functionality of your faucet:
- Ninu: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish. Rinse thoroughly and dry with a soft cloth.
- Fifọ Aerator: If water flow becomes restricted, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse it before reattaching.
- Rirọpo Katiriji: If the faucet drips or leaks from the handles, the washerless cartridges may need replacement. Turn off the water supply, remove the handle, and replace the cartridge according to the manufacturer's instructions for the specific cartridge type.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Faucet leaks from spout | Katiriji ti o wọ | Rọpo katiriji. |
| Faucet leaks from handle base | Loose packing nut or worn O-rings/cartridge | Tighten packing nut or replace O-rings/cartridge. |
| Ṣiṣan omi kekere | Clogged aerator or partially closed shut-off valve | Clean aerator. Ensure shut-off valves are fully open. |
| Water temperature not mixing properly | Issue with hot or cold water supply | Check hot and cold water supply lines and shut-off valves. |
9. atilẹyin ọja Information
Project Source products are manufactured to high-quality standards and are backed by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the Project Source official webAaye fun alaye atilẹyin ọja ofin ati ipo. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
10. Onibara Support
If you have any questions, require assistance with installation, or need to order replacement parts, please contact Project Source customer service. Contact information can typically be found on the product packaging or the official Project Source webojula.
