Craftmade Bolden 50504-FB 4-Light Vanity Bath Lighting Instruction Manual

1. Ọja Ipariview

This manual provides detailed instructions for the installation, operation, and maintenance of your Craftmade Bolden 4-Light Vanity Bath Lighting fixture, model 50504-FB. This fixture features a flat black finish with clear seeded glass shades, designed for indoor damp awọn ipo.

Image 1.1: Craftmade Bolden 4-Light Vanity Bath Lighting fixture.

2. Alaye Aabo

IKILO: Láti dín ewu iná, ìkọlù iná mànàmáná, tàbí ìpalára ara ẹni kù, máa tẹ̀lé àwọn ìlànà ààbò wọ̀nyí nígbà gbogbo:

• Always turn off the power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
• Kan si alagbawo ina mọnamọna ti o pe ti o ko ba ni idaniloju nipa ilana fifi sori ẹrọ.
• All wiring connections must be in accordance with local and national electrical codes.
• This fixture is CUL Approved for DAMP Locations. Do not install in areas exposed to direct water spray.
• Ilana 65 Ikilọ: Ọja yii le ni awọn kemikali ti a mọ si Ipinle California lati fa akàn ati awọn abawọn ibimọ tabi ipalara ibisi miiran. Fọ ọwọ lẹhin mimu.
• Maṣe kọja wat ti o pọjutage pato fun awọn Isusu.

3. Package Awọn akoonu

Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:

• Vanity Light Fixture (1)
• Glass Shade(s) (4)
• Apo Hardware (1)
• Itọsọna fifi sori ẹrọ (1)

Akiyesi: Awọn Isusu ko si ati pe o gbọdọ ra lọtọ.

4. Eto ati fifi sori

Assembly is required. Follow these steps for proper installation:

1. Mura fun fifi sori: Pa agbara ni ibi fifọ iyipo. Pa agbegbe iṣẹ rẹ.
2. Ohun elo iṣagbesori: Attach the mounting bracket to the existing junction box (junction box not included) using the provided hardware. Ensure the bracket is securely fastened.
3. Asopọmọra: So awọn waya ina ti ohun elo naa mọ awọn waya ile ti o baamu (dudu si dudu, funfun si funfun, ilẹ si ilẹ) nipa lilo awọn eso waya. Rii daju pe gbogbo awọn asopọ wa ni aabo.
4. Imuduro to ni aabo: Carefully align the fixture with the mounting bracket and secure it in place with the provided screws.
5. Fi Awọn Ojiji sori ẹrọ: Gently attach the clear seeded glass shades to the fixture.
6. Fi sori ẹrọ Isusu: Screw in the appropriate E26 base bulbs (not included). Do not exceed 100 watts per bulb.
7. Pada Agbara pada: Once installation is complete and all components are secure, restore power at the circuit breaker.

Àwòrán 4.1: Àwọn ìwọ̀n ọjà fún ètò ìfisílé.

Image 4.2: Assembled fixture detail.

5. Awọn ilana Iṣiṣẹ

The Craftmade Bolden vanity light operates via a standard wall switch (rocker or push button, not included). This fixture is designed for use with four E26 medium base bulbs, up to 100 watts each, for a total of 400 watts.

• Ibamu Boolubu: Compatible with Incandescent, CFL, Halogen, or LED bulbs.
• Išẹ Dimming: The fixture is dimmable when used with dimmable bulbs and a compatible dimmer switch (sold separately).
• Iṣakoso ina: Lo iyipada odi ti o wa tẹlẹ lati tan imuduro ina si tan tabi pa.

6. Itọju

Regular maintenance ensures the longevity and appearance of your lighting fixture.

• Ninu: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
• Rirọpo Boolubu: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Replace with E26 medium base bulbs, not exceeding 100 watts per bulb.
• Awọn iboji gilasi: The clear seeded glass shades can be removed for cleaning. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.

7. Laasigbotitusita

If your fixture is not functioning correctly, refer to the following common issues and solutions:

• Imọlẹ ko tan:
  • Ṣayẹwo boya agbara wa ni titan ni ẹrọ fifọ.
  • Ensure bulbs are screwed in tightly and are not burnt out.
  • Daju pe gbogbo awọn asopọ onirin wa ni aabo.
• Awọn imọlẹ n tan:
  • Ensure bulbs are compatible with the dimmer switch, if one is installed.
  • Ṣayẹwo awọn asopọ onirin alaimuṣinṣin.
• Dimming ko ṣiṣẹ:
  • Confirm that both the bulbs and the wall switch are dimmable.
  • Ensure the dimmer switch is correctly installed and compatible with the bulb type.

Ti awọn iṣoro ba tẹsiwaju, kan si atilẹyin alabara.

8. Awọn pato

Detailed technical specifications for the Craftmade Bolden 50504-FB fixture:

Image 8.1: Key specifications overview.

9. Atilẹyin ọja ati Support

Atilẹyin ọja: This Craftmade lighting fixture comes with a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

Atilẹyin Onibara: For technical assistance, warranty claims, or any questions regarding your product, please contact Craftmade customer support:

Foonu: (800) 486-4892

Please have your model number (50504-FB) and date of purchase available when contacting support.