1. Ifihan
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your ErGear Dual Monitor Stand. Designed for enhanced ergonomics and workspace optimization, this monitor mount allows for flexible positioning of two monitors, freeing up valuable desk space. Please read this manual thoroughly before installation and use to ensure safe and proper functionality.
Olusin 1: Pariview of the ErGear Dual Monitor Stand components.
2. Ibamu
To ensure proper fit and function, your monitors must meet the following criteria:
- Iwọn iboju: Compatible with monitors ranging from 13 to 32 inches.
- Opin iwuwo: Each monitor arm supports a maximum weight of 17.6 lbs (8 kg).
- Ibamu VESA: Monitors must have VESA mounting holes spaced 75x75 mm or 100x100 mm apart.
If you are unsure about your monitor's compatibility, please consult your monitor's manual or contact customer service for assistance.
Figure 2: Monitor size and weight compatibility.
Figure 3: VESA mounting hole requirements.
3. Key Awọn ẹya ara ẹrọ
The ErGear Dual Monitor Stand offers a range of features designed to enhance your viewing experience and workspace efficiency:
- Ibamu Wapọ: Accommodates two 13-32 inch monitors with a 30.71” (78cm) wide arm span and 16.3” (41.4cm) high pole, providing extensive adjustability.
- Flexible Screen Positioning: Features +/-90° swivel, +/-45° tilt, and 360° rotation for optimal ergonomic viewing, reducing neck and eye strain.
- Imudara aaye: Elevates monitors to eye level, freeing up valuable desk space for other peripherals and improving overall organization.
- Iṣakoso okun USB ti a ṣepọ: Built-in clips allow for neat routing of cables, contributing to a clean and clutter-free workspace.
Figure 4: Flexible screen positioning with swivel and tilt.
Figure 5: Full adjustability overview.
Figure 6: Maximizing desk space with the monitor stand.
Figure 7: Achieving ergonomic viewing awọn igun.
4. Eto ati fifi sori
The ErGear monitor mount is designed for easy setup and comes with all necessary hardware. Follow the detailed instructions provided in the manual included with your product. There are two primary installation options:
- C-Clamp Iṣagbesori: Ideal for desks with a thickness between 0.39" and 3.15" (10-80mm). This method clamps oke si eti tabili rẹ.
- Oke Grommet: Suitable for desks with existing grommet holes or if you prefer to drill a hole. This method fits desk thicknesses between 0.39" and 2.17" (10-55mm).
For optimal stability, it is recommended to install the mount on a sturdy wooden table. Ensure the bottom of your table is free of any beams or panels that might interfere with the installation process.
Figure 8: Two common mounting methods.
Fifi sori Video Itọsọna
Video 1: Official ErGear Dual Monitor Desk Mount overview and installation steps. This video demonstrates the product's features and provides visual guidance for setup.
5. Ṣiṣẹ ati Awọn atunṣe
Once installed, the ErGear Dual Monitor Stand offers extensive adjustability to customize your viewiriri:
- Atunse Giga: The monitors can be easily raised or lowered along the central pole to achieve your desired eye level. The pole height is 16.3 inches (41.4 cm).
- Tẹ: Adjust the monitor screen +/-45° vertically to reduce glare and optimize viewing awọn igun.
- Swivel: Pivot the monitors +/-90° horizontally to share your screen or adjust for different tasks.
- Yiyi: Rotate your monitors 360° from landscape to portrait orientation, ideal for coding, document viewing, or graphic design.
- Itẹsiwaju Apá: The dual arms can extend and retract, allowing you to position your monitors closer or further away from you. Each arm features multiple 180° joints for precise positioning.
Figure 9: Adjusting monitor height.
Figure 10: Adjustable arms for flexible monitor placement.
6. Itọju
Regular maintenance ensures the longevity and optimal performance of your ErGear Dual Monitor Stand:
- Ninu: Mu ese lori oke pẹlu asọ, damp asọ. Yago fun abrasive ose tabi olomi ti o le ba awọn ipari.
- Titọpa: Periodically check all screws and bolts to ensure they are securely tightened. Over time, minor loosening may occur due to adjustments or vibrations. Use the provided Allen keys for adjustments.
- Iṣakoso USB: Ensure cables are properly routed through the integrated clips to prevent strain or damage. Re-route if necessary after significant adjustments.
7. Laasigbotitusita
If you encounter any issues with your monitor stand, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Monitors wobble or are not stable. | Loose connections at the desk clamp/grommet or monitor attachment points. | Rii daju pe tabili clamp/grommet is securely fastened to the desk. Tighten all screws connecting the VESA plate to the monitor and the arms to the pole. |
| Monitors tilt downwards or do not hold position. | Tilt mechanism is not tight enough, or monitor weight exceeds capacity. | Tighten the tilt adjustment knob/screw on the monitor arm. Verify that each monitor's weight does not exceed 17.6 lbs (8 kg). |
| Arms are too stiff or difficult to move. | Joints may be overtightened or require lubrication. | Slightly loosen the screws at the arm joints. If necessary, apply a small amount of silicone-based lubricant to the moving parts. |
| Desk is damaged by the clamp. | Over-tightening of the C-clamp. | Avoid excessive tightening of the C-clamp. Use protective padding between the clamp and the desk surface if your desk material is delicate. |
Tí ìṣòro náà bá ń bá a lọ lẹ́yìn tí a bá ti gbìyànjú àwọn ìdáhùn wọ̀nyí, jọ̀wọ́ kan sí ìrànlọ́wọ́ oníbàárà ErGear fún ìrànlọ́wọ́ síwájú sí i.
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | ErGear |
| Nọmba awoṣe | EGCM1 |
| Iwọn Nkan | 3.34 iwon |
| Ọja Mefa | 17 x 6.5 x 3.7 inches |
| Àwọ̀ | Dudu |
| Ohun elo | Alloy Irin, Irin |
| Iwon Ibamu to kere ju iboju | 13 inches |
| O pọju Iwon iboju ibaramu | 32 inches |
| Maximum Weight Capacity (per arm) | 17.6 lbs (8 kg) |
| VESA ibamu | 75x75 mm, 100x100 mm |
| Iṣipopada Iru | Swivel, Tilt, Articulating, Rotation |
| Iwọn Angeli Ti o pọ julọ | Awọn iwọn 90 |
| C-Clamp Iduro Iduro | 0.39" - 3.15" (10-80mm) |
| Sisanra Iduro Grommet | 0.39" - 2.17" (10-55mm) |
| UPC | 840478806380 |
9. Atilẹyin ọja ati Support
For information regarding warranty coverage, product registration, or technical support, please refer to the warranty card included with your product packaging or visit the official ErGear website. You may also contact ErGear customer service directly for any inquiries or assistance with your monitor stand.
Iṣẹ onibara: Please refer to the contact information provided in your product documentation or on the official ErGear webojula.
