LTS CMIP3342W-28MA 4MP IP Turret Dome Camera User Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your LTS CMIP3342W-28MA 4MP IP Turret Dome Camera. Please read this manual thoroughly before using the product to ensure correct usage and to prevent damage or injury. Keep this manual for future reference.

2. Alaye Aabo

• Ensure the power supply meets the camera's requirements. Incorrect voltage le fa ipalara.
• Ma ṣe fi kamẹra han si awọn iwọn otutu to gaju, ọriniinitutu, tabi awọn agbegbe ibajẹ.
• Avoid pointing the camera lens directly at strong light sources for extended periods, as this may damage the image sensor.
• Mu kamẹra naa pẹlu iṣọra. Maṣe ju silẹ tabi tẹriba si awọn gbigbọn to lagbara.
• All installation and service should be performed by qualified personnel.

3. Package Awọn akoonu

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your supplier immediately.

• LTS CMIP3342W-28MA IP Turret Dome Camera
• Iṣagbesori skru ati Wall Plugs
• Liluho awope
• Hex Wrench
• Ohun elo Asopọ Omi ti ko ni omi
• Itọsọna Ibẹrẹ kiakia (iwe yii)

Aworan 3.1: The LTS CMIP3342W-28MA IP Turret Dome Camera shown with its included accessories, including mounting hardware and a drill template for installation.

4. Ọja Ipariview

The LTS CMIP3342W-28MA is a 4MP IP Turret Dome Camera designed for reliable surveillance. It features a 2.8mm fixed lens, built-in microphone, Wide Dynamic Range (WDR), and 100ft (30m) IR night vision.

Aworan 4.1: Iwaju view of the LTS CMIP3342W-28MA camera, highlighting the lens and IR illuminators.

Aworan 4.2: Apa view of the camera, illustrating the turret design which allows for flexible angle adjustment after mounting.

5. Eto ati fifi sori

5.1 Iṣagbesori Location

Yan ipo iṣagbesori ti o dara ti o pese aaye ti o fẹ ti view and is within range of your network infrastructure. Ensure the surface is strong enough to support the camera's weight.

5.2 iṣagbesori Igbesẹ

1. Affix the provided drill template to the desired mounting surface.
2. Drill holes according to the template for mounting screws and cable routing.
3. Insert wall plugs into the drilled holes if mounting on masonry.
4. Route the network cable through the designated hole.
5. Ṣe aabo ipilẹ kamẹra si dada iṣagbesori nipa lilo awọn skru ti a pese.
6. Ṣatunṣe igun kamẹra bi o ṣe nilo.

5.3 Wáyà àti Ìsopọ̀mọ́ra

This camera utilizes Power over Ethernet (PoE) for both power and data transmission. Connect a standard Ethernet cable from your PoE-enabled switch or NVR to the camera's network port. The camera is not compatible with DC power or BNC video connections.

Aworan 5.1: Illustration of compatible network cable (PoE) for the camera, contrasting with incompatible DC power and BNC video connections.

6. Awọn ilana Iṣiṣẹ

6.1 Iṣeto ni ibẹrẹ

Upon first power-up, the camera will obtain an IP address via DHCP if available. You can use a manufacturer-provided IP search tool to discover the camera's IP address on your network. Access the camera's web ni wiwo nipa titẹ awọn oniwe-IP adirẹsi sinu kan web kiri ayelujara.

6.2 Web Wiwọle ni wiwo

Enter the default username and password (refer to your Quick Start Guide or manufacturer's documentation for default credentials). It is highly recommended to change the default password immediately for security purposes.

6.3 Key Awọn ẹya ara ẹrọ

• Ipinnu 4MP: Provides high-definition video for clear image capture.
• 2.8mm Ti o wa titi lẹnsi: Nfun kan jakejado aaye ti view, suitable for general surveillance.
• Gbohungbohun ti a ṣe sinu: Enables audio recording alongside video.
• WDR (Ibiti Dynamic Wide jakejado): Improves image quality in scenes with both very bright and very dark areas.
• Iran Iran Night Infrared illuminators provide clear video up to 100ft (30m) in low-light or no-light conditions.
• Iwari išipopada: Configure motion detection zones and sensitivity for event-triggered recording or alerts.

7. Itọju

7.1 Ninu

Regularly clean the camera lens and housing with a soft, dry cloth. For stubborn dirt, use a mild detergent solution applied to the cloth, then wipe dry. Do not use harsh chemicals or abrasive cleaners.

7.2 famuwia imudojuiwọn

Lorekore ṣayẹwo olupese ká webAaye fun awọn imudojuiwọn famuwia. Awọn imudojuiwọn famuwia le mu iṣẹ ṣiṣe dara si, ṣafikun awọn ẹya tuntun, ati mu aabo pọ si. Tẹle awọn ilana ti a pese pẹlu iṣọra nigbati o ba n ṣe awọn imudojuiwọn.

8. Laasigbotitusita

• Ko si Agbara: Ensure the Ethernet cable is securely connected and your PoE source is active and functioning correctly.
• Ko si Fidio: Verify network connectivity. Check the camera's IP address and ensure it's accessible on the network. Confirm that the NVR or viewing software is configured correctly.
• Didara Aworan Ko dara: Clean the lens. Check for obstructions. Adjust camera settings such as exposure, brightness, and WDR in the web ni wiwo.
• Iran Alẹ Ko Ṣiṣẹ: Ensure IR illuminators are not obstructed. Check night vision settings in the camera's web ni wiwo.
• Ko le Wiwọle Web Ni wiwo: Verify the camera's IP address. Ensure your computer is on the same network segment. Try pinging the camera's IP address.

9. Awọn pato

10. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official LTS webaaye tabi kan si alagbata ti a fun ni aṣẹ. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.