Ọja Pariview
The DELTA D75624SS is a 24-inch towel bar designed for bathroom use. It features a durable zinc construction with a stainless finish, providing both functionality and a modern aesthetic. This manual provides detailed instructions for safe installation, operation, and maintenance.
Image: DELTA D75624SS 24-inch Towel Bar. This image displays the complete towel bar assembly, including the bar and mounting posts, in a stainless steel finish.
Alaye Aabo
Jọ̀wọ́ ka gbogbo ìtọ́ni kí o tó fi sori ẹ̀rọ àti lílò. Àìtẹ̀lé àwọn ìtọ́ni wọ̀nyí lè fa ìbàjẹ́ tàbí ìpalára fún dúkìá.
- Máa wọ àwọn ohun èlò ààbò tó yẹ nígbà gbogbo, bíi àwọn gíláàsì ààbò, nígbà tí o bá ń fi sori ẹ̀rọ.
- Ensure the mounting surface is structurally sound and capable of supporting the towel bar and the weight of towels.
- Ma ṣe fi awọn skru duro, nitori eyi le ba ọja naa jẹ tabi oke gbigbe.
- Pa awọn ẹya kekere kuro lati ọdọ awọn ọmọde.
- Ti o ko ba ni idaniloju nipa eyikeyi apakan ti ilana fifi sori ẹrọ, kan si alamọja ti o peye.
Package Awọn akoonu
Rí i dájú pé gbogbo àwọn ẹ̀yà ara wà níbẹ̀ kí o tó bẹ̀rẹ̀ sí í fi sori ẹ̀rọ. Tí àwọn ẹ̀yà ara kan bá sọnù tàbí tí wọ́n bá bàjẹ́, má ṣe tẹ̀síwájú pẹ̀lú fífi sori ẹ̀rọ náà kí o sì kan sí ìrànlọ́wọ́ àwọn oníbàárà.
- Towel Bar Assembly (1)
- Awọn biraketi fifi sori (2)
- Iṣagbesori Skru (4)
- Wall Anchors (4) (for drywall installation)
- Hex Wrench (1)
Awọn irinṣẹ ti a beere
Awọn irinṣẹ wọnyi ni a nilo nigbagbogbo fun fifi sori ẹrọ:
- Ikọwe
- Teepu Idiwọn
- Phillips Head screwdriver
- Lilu pẹlu kekere liluho ti o yẹ (fun apẹẹrẹ, 1/4 inch fun awọn ìdákọró ogiri gbigbẹ)
- Ipele
Awọn ilana fifi sori ẹrọ
Follow these steps to properly install your DELTA D75624SS 24-inch towel bar.
Igbesẹ 1: Pinnu Ibi Igbesoke
Choose a suitable location on your wall. Use a measuring tape and level to mark the desired height and ensure the towel bar will be level. The distance between the centers of the two mounting posts should be approximately 24 inches.
Step 2: Prepare Mounting Brackets
Separate the mounting brackets from the towel bar posts by loosening the set screws located on the underside of each post using the provided hex wrench. Keep the set screws and hex wrench in a safe place.
igbese 3: Mark iho iho
Hold one mounting bracket against the wall at your marked location. Use a pencil to mark the positions for the two screw holes. Repeat this process for the second mounting bracket, ensuring it is level with the first and at the correct distance.
igbese 4: Lilu Pilot Iho
Using a drill, create pilot holes at the marked locations. If drilling into a wall stud, use a smaller drill bit appropriate for the mounting screws. If drilling into drywall without a stud, use a drill bit sized for the wall anchors (typically 1/4 inch). Insert the wall anchors flush with the wall surface if required.
Step 5: Secure Mounting Brackets
Align each mounting bracket with its respective pilot holes (and anchors, if used). Secure the brackets to the wall using the provided mounting screws and a Phillips head screwdriver. Ensure the brackets are firmly attached and level.
Step 6: Attach Towel Bar Posts
Slide the towel bar posts over the secured mounting brackets. Ensure the set screw holes on the underside of the posts align with the brackets. The towel bar should be centered between the posts.
Step 7: Tighten Set Screws
Using the hex wrench, tighten the set screws on the underside of each post. Tighten until the posts are securely fastened to the mounting brackets and the towel bar does not wobble. Do not overtighten.
Awọn ilana Iṣiṣẹ
The DELTA D75624SS towel bar is designed for holding towels and other lightweight bathroom textiles. Ensure items placed on the bar do not exceed its structural capacity. Avoid hanging heavy objects or using the bar as a grab handle.
Itọju ati Itọju
To maintain the finish and appearance of your towel bar, follow these cleaning guidelines:
- Mọ nigbagbogbo pẹlu asọ, damp asọ.
- Fun awọn aaye agidi, lo ọṣẹ kekere ati ojutu omi.
- Rinse thoroughly with clean water and dry immediately with a soft cloth to prevent water spots.
- Maṣe ṣe lo abrasive ose, simi kemikali, tabi scouring paadi, bi awọn wọnyi le ba awọn ipari.
Laasigbotitusita
If you encounter issues with your towel bar, refer to the following common solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Pẹpẹ toweli kan lara alaimuṣinṣin tabi rirọ. | Set screws are not fully tightened, or mounting brackets are loose. | Ensure the set screws on the underside of the posts are securely tightened with the hex wrench. Check if the mounting screws securing the brackets to the wall are tight. If wall anchors were used, ensure they are properly seated. |
| Àwọn ìkọ́ tàbí ìbàjẹ́ sí ìparí. | Use of abrasive cleaners or sharp objects. | Avoid using abrasive materials for cleaning. Minor scratches may be polished with a non-abrasive metal polish suitable for stainless steel, if desired. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | D75624SS |
| Brand | DELTA |
| Ohun elo | Zinc |
| Pari Iru | Alagbara |
| Àwọ̀ | Alagbara |
| Ọja Mefa | 3.63 x 27.13 x 1.88 inches (Ijinle x Iwọn x Giga) |
| Iwọn Nkan | 1.33 iwon |
| UPC | 034449896597 |
Atilẹyin ọja ati Support
This DELTA product is covered by the manufacturer's limited warranty. For specific warranty details, claims, or technical support, please refer to the official DELTA website or contact their customer service department directly. Keep your proof of purchase for warranty purposes.
DELTA Customer Support:
- Webojula: www.deltafaucet.com
- Foonu: Wo webAaye fun agbegbe awọn nọmba olubasọrọ.
