Ọrọ Iṣaaju
This manual provides detailed instructions for the proper setup, operation, and maintenance of your SmallRig Mini Tripod BUT2664. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Ọja Awọn ẹya ara ẹrọ
- Apẹrẹ Igbegasoke: The ball head features laser-engraved 5° increments for precise panning. A 3-position leg angle adjustment system offers flexible shooting options.
- Arca-Swiss Compatible QR Plate: Includes a quick-release plate and clamp compatible with Arca-Swiss standards for fast camera mounting and dismounting. The QR plate has rubber padding to protect your camera.
- High Stability Construction: Constructed from durable aluminum alloy. The tripod legs support up to 44 lbs (20 kg), and the ball head supports up to 4.4 lbs (2 kg).
- 360° Swivel Ball Head: Allows for 360° horizontal rotation and -90° to +45° tilting, ideal for panoramic photography and versatile angle adjustments.
- Solid Base Support: Rubber feet prevent the tripod from sliding and protect delicate surfaces, providing enhanced stability.
Aworan: Alaye view of the 360° panoramic photography features, including the quick release plate, thumb wheel, 3 bubble levels, 36mm diameter ball joint, and 360° panorama base.
Image: Illustration of the knob ball head, demonstrating its multi-angle adjustment and quick switching between vertical and horizontal shooting orientations.
Image: Visual representation of the tripod's aluminum alloy construction, highlighting its payload capacity: up to 20 kg (44 lbs) for the tripod without the ball head, and up to 2 kg (4.4 lbs) for the ball head itself.
Eto ati Apejọ
- Unfolding the Legs: Gently pull the tripod legs outwards until they click into one of the three available angle positions. The legs are designed to lock securely.
- Adjusting Leg Angles: The tripod offers three leg angle positions for varied stability and height. To change the angle, press the small buttons near the leg hinges and reposition the legs.
- Sísopọ̀ mọ́ àwo ìtújáde kíákíá: The Arca-Swiss compatible quick-release plate is designed for rapid attachment. Slide your camera or device onto the plate and secure it using the screw.
- Gbigbe Ẹrọ Rẹ: Ṣii clamp on the ball head by turning the thumb wheel. Insert the quick-release plate with your device into the clamp and tighten the thumb wheel until secure.
Image: The SmallRig Mini Tripod shown in its compact form and with various devices like a camera and smartphone mounted, illustrating its versatility.
Image: A diagram illustrating the five-second quick mount/dismount process for the standard Arca-Swiss style quick release plate.
Awọn ilana Iṣiṣẹ
- Ball Head Adjustment: To adjust the angle of your mounted device, loosen the large knob on the ball head. Position your device as desired, then tighten the knob to secure it. The ball head allows for 360° rotation and tilting.
- Panning Adjustment: For smooth horizontal panning, loosen the smaller knob located at the base of the ball head. This allows the head to rotate 360° independently of the legs. Tighten to lock the panning position.
- Center Column Extension: The tripod features a small adjustable center column. Twist the dial below the ball head to unlock and extend or retract the center column for minor height adjustments. Tighten the dial to lock it in place.
- Kekere-Profile Ibon: For extremely low-angle shots, the center column can be fully removed by unscrewing it. The ball head can then be directly attached to the tripod base, allowing the legs to spread wide for a very low setup.
Itoju
To ensure the longevity of your SmallRig Mini Tripod, keep it clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals. Store the tripod in a dry place away from extreme temperatures.
Laasigbotitusita
- Legs feel loose or too tight: The leg hinges can be adjusted using a standard Allen wrench. If the legs are too loose or too tight, you can tighten or loosen the screws at the hinges to achieve your preferred tension.
- Tripod not stable at 130° leg angle: Please note that the leg screws should not be adjusted for leg angle. The tripod is designed to stand stably when the legs are set at 130°. For tripods with leg angle notches/locks, refer to model BUT2666.
- Ball head knob interferes with folded legs: When folding the tripod for storage, ensure the ball head knob is positioned to allow the legs to fold flush against the body. A slight adjustment of the ball head may be necessary.
Awọn pato
| Sipesifikesonu | Iye |
|---|---|
| Ọja Mefa | 9.06 x 3.15 x 2.36 inches |
| Iwọn Nkan | 14.5 iwon (410 Giramu) |
| Ohun elo | Aluminiomu, Roba |
| Tripod Ori Oriṣi | Awọn olori rogodo |
| Ball Head Screw | 1/4"-20 |
| Ball Head Diameter | 80.0 mm |
| Ball Head Load Capacity | 4.4 iwon (2.0 kg) |
| Mini Tripod Load Capacity | 44 iwon (20.0 kg) |
| Panning Range | 360° |
| Iye Àwọn Ẹ̀yà Ẹsẹ̀ | 1 |
| Awo kiakia-Tu silẹ | For Arca Standard |
| O pọju Giga | 9.1 inches |
| Igi to kere julọ | 4.4 inches |
Image: Contents of the product packaging, including the ball head, mini tripod, hex spanner, and quick release plate, alongside a detailed table of specifications.
Atilẹyin ọja ati Support
Fun alaye atilẹyin ọja, atilẹyin imọ-ẹrọ, tabi awọn ibeere iṣẹ, jọwọ tọka si SmallRig osise webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira.
