Ìgbékalẹ̀ Ìmọ́lẹ̀ Ìdàgbàsókè Ìmọ́lẹ̀ Inspire P350167-143 Ìfisílé àti Ìwé Ìtọ́sọ́nà Olùlò Semi-Flush Mount P350167-143

Ọja Pariview

The Progress Lighting Inspire Collection Graphite Three-Light 18" Semi-Flush Mount is designed to provide ambient illumination for various indoor spaces. This fixture features a black graphite finish on the canopy and decorative knob, complemented by a Summer Linen fabric shade and an etched glass diffuser. It is suitable for modern farmhouse, updated traditional, and transitional interiors, enhancing the ambiance of rooms such as bathrooms, closets, hallways, and bedrooms.

Image: The Progress Lighting Inspire Collection Semi-Flush Mount, featuring a graphite finish and a summer linen shade.

Aworan: Example of the semi-flush mount installed in a hallway, providing overhead lighting.

Image: The semi-flush mount light fixture illuminating a modern living room space.

Awọn pato

Eto ati fifi sori

This fixture requires assembly and installation. It is recommended that installation be performed by a qualified electrical contractor to ensure safety and proper function. Always turn off power at the main circuit breaker before beginning installation.

Awọn irinṣẹ ti a beere (Ko si):

• Screwdriver
• Waya strippers
• Pliers
• Itanna teepu
• Awọn gilaasi aabo

Awọn igbesẹ fifi sori ẹrọ:

1. Mura fun fifi sori: Turn off electricity at the main fuse box or circuit breaker. Clear the work area.
2. Mounting Strap Installation: Secure the mounting strap to the outlet box. Ensure it is firmly attached.
3. Awọn isopọ onirin: Connect the fixture's wires to the house wires according to standard electrical codes (black to black, white to white, ground to ground). Use appropriate wire connectors.
4. Secure Fixture to Mounting Strap: Carefully lift the fixture and align it with the mounting strap. Secure the fixture to the strap using the provided screws.
5. Install Shade and Diffuser: Attach the Summer Linen shade and the etched glass diffuser to the fixture body. Follow the specific instructions in the diagram for securing these components.
6. Fi Isusu sii: Screw in three E26 medium base bulbs (up to 60-watt maximum, or LED equivalents, sold separately).
7. Pada Agbara pada: Once installation is complete and all components are secure, restore power at the main circuit breaker.

Image: Page 1 of the assembly and installation instructions, showing wiring and mounting steps.

Image: Page 2 of the product sheet, detailing dimensions, electrical, lamping, and additional information.

Understanding Close-to-Ceiling Lighting

Video: An informational video from Progress Lighting discussing close-to-ceiling lighting trends, types (flush mount vs. semi-flush mount), and sizing recommendations for various rooms.

Awọn ilana Iṣiṣẹ

This semi-flush mount fixture is designed for general ambient lighting. It accommodates three E26 medium base bulbs, with a maximum wattage of 60 watts per bulb, or equivalent LED bulbs (sold separately).

Išẹ Dimming:

The fixture is dimmable when used with a compatible wall dimmer switch and dimmable light bulbs. Ensure both the dimmer and bulbs are rated for dimming to achieve desired light levels and avoid damage.

Image: Information regarding recommended bulb types (E26, A19 frosted) and dimming compatibility with a wall dimmer.

Light Output and Efficiency:

The light output (lumens) will vary depending on the bulbs installed. Refer to the bulb manufacturer's specifications for lumen output. For energy-saving benefits, consider using LED equivalent bulbs.

Image: A lumens calculator chart illustrating the approximate lumen output for different wattage incandescent, CFL, and LED bulbs.

Itoju

To maintain the appearance and functionality of your Progress Lighting fixture, follow these general guidelines:

• Ninu: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or shade material.
• Rirọpo Boolubu: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before handling. Replace with E26 medium base bulbs, not exceeding 60 watts per bulb, or appropriate LED equivalents.
• Glass Diffuser: The etched glass diffuser can be carefully removed for cleaning. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.

Laasigbotitusita

If you experience issues with your fixture, consider the following common troubleshooting steps:

• Imọlẹ ko tan:
  • Ṣayẹwo ti o ba jẹ pe fifọ Circuit ti kọlu.
  • Ensure bulbs are securely screwed in and are not burnt out.
  • Daju pe gbogbo awọn asopọ waya wa ni aabo.
• Awọn imọlẹ n tan:
  • If using a dimmer, ensure both the dimmer switch and bulbs are compatible with dimming.
  • Ṣayẹwo awọn asopọ okun waya alaimuṣinṣin.
• Insufficient light output:
  • Ensure bulbs are of the correct wattage and type for your desired brightness.
  • Consider higher lumen output LED bulbs.

For persistent issues or complex electrical problems, consult a qualified electrician.

Atilẹyin ọja ati Support

This Progress Lighting fixture comes with a 1-odun lopin olupese ká atilẹyin ọja. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ-ṣiṣe labẹ lilo deede ati iṣẹ.

For warranty claims, technical support, or replacement parts, please contact Progress Lighting customer service. Refer to the contact information provided with your product packaging or visit the official Progress Lighting webojula.

Iṣẹ onibara: 1-800-447-1723 (as seen on installation sheet)

For additional product information and other lighting solutions, visit the Progress Lighting Store on Amazon.