DAB FEKA600

Ìwé Ìtọ́sọ́nà Olùlò Pọ́ọ̀pù Abẹ́ Omi DAB FEKA 600 MA

Model: FEKA600

1. Ifihan

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your DAB FEKA 600 MA submersible pump. Please read this manual thoroughly before using the pump and keep it for future reference.

The DAB FEKA 600 MA is a robust submersible pump designed for draining and lifting light wastewater, greywater, and rainwater in domestic and residential environments. It is suitable for both fixed and mobile installations.

2. Alaye Aabo

Always observe the following safety precautions to prevent personal injury and damage to the pump.

3. Ọja Ipariview

The DAB FEKA 600 MA pump is engineered for reliability and durability, featuring high-quality materials and a robust design.

DAB FEKA 600 MA Submersible Pump

Figure 3.1: DAB FEKA 600 MA Submersible Pump - Front View.

DAB FEKA 600 MA Pump Features Diagram

Figure 3.2: Key Features of the DAB FEKA 600 MA Pump. This diagram highlights the automatic start/stop float arm, durable construction materials, a flow rate of 15,000 liters per hour, a maximum head of 9 meters, and the ability to handle solids up to 25mm. Note: Official specifications for flow rate and head are provided in Section 8.

3.1 Awọn paati bọtini

3.2 Awọn ohun elo

The FEKA 600 MA pump is suitable for various applications, including:

DAB FEKA 600 MA Pump Applications

Figure 3.3: Common Applications for the DAB FEKA 600 MA Pump. This image illustrates its use for emptying crawl spaces, pumping dirty water, dewatering construction sites, and managing rainwater.

4. Eto ati fifi sori

Proper installation is crucial for the pump's performance and longevity. Follow these steps carefully.

4.1 Akojọ aṣyn fifi sori ẹrọ tẹlẹ

4.2 fifi sori Igbesẹ

  1. Ipo ti fifa soke naa: Place the pump on a stable, flat surface in the lowest part of the area to be drained. Ensure the suction grille is not obstructed. The minimum admission level is 38 mm.
  2. Connecting the Discharge Pipe: Attach a suitable discharge pipe to the pump's outlet. Ensure all connections are watertight. The pump has a 1 1/4" G threaded outlet.
  3. Float Switch Adjustment (for automatic versions): Adjust the float switch cable length to set the desired ON/OFF levels. Ensure the float can move freely without obstruction.
  4. Asopọ agbara: Connect the pump to a grounded electrical outlet. Ensure the circuit is protected by a residual current device (RCD).
  5. Idanwo: Before full operation, perform a test run to ensure the pump activates and deactivates correctly and that there are no leaks.

For detailed technical specifications and installation diagrams, refer to the official technical sheet: DAB FEKA Technical Sheet.

5. Awọn ilana Iṣiṣẹ

The DAB FEKA 600 MA pump is designed for straightforward operation.

5.1 Automatic Operation (with float switch)

  1. Ensure the pump is properly installed and connected to power.
  2. The pump will automatically start when the water level rises and lifts the float switch.
  3. The pump will automatically stop when the water level drops and the float switch returns to its lower position.

5.2 Manual Operation (without float switch or for specific tasks)

For manual versions or when bypassing the float switch:

  1. Connect the pump to power. The pump will begin operating immediately.
  2. Monitor the water level to prevent the pump from running dry for extended periods. The pump can run dry for up to 1 minute without damage.
  3. Disconnect the pump from power to stop operation.

Pataki: Do not allow the pump to run dry for more than 1 minute. Prolonged dry running can cause damage.

6. Itọju

Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect the pump from the power supply before any maintenance.

6.1 Ninu fifa soke

6.2 Winter Ibi ipamọ

If the pump will not be used for an extended period or during freezing temperatures:

6.3 Ọjọgbọn Iṣẹ

For internal components, motor, or seal inspection, it is recommended to contact a qualified service technician. Do not attempt to disassemble the motor housing.

7. Laasigbotitusita

Ṣaaju ki o to kan si atilẹyin, tunview awọn oran ti o wọpọ wọnyi ati awọn ojutu wọn.

IsoroOwun to le FaOjutu
Pump ko bẹrẹ.Ko si ipese agbara.
Float switch stuck (automatic version).
Gbona apọju Idaabobo mu ṣiṣẹ.
Ṣayẹwo asopọ agbara ati fifọ Circuit.
Clear any obstructions around the float switch.
Allow pump to cool down; it should reset automatically.
Pọ́ọ̀pù náà ń ṣiṣẹ́ ṣùgbọ́n omi kò jáde.Suction grille blocked.
Discharge pipe blocked or kinked.
Air lock in the pump.
Disconnect power and clear the suction grille.
Check and clear the discharge pipe.
Submerge the pump completely and shake gently to release air.
Yiyi fifa soke tan ati pa nigbagbogbo.Float switch incorrectly adjusted.
Insufficient water volume.
Adjust float switch to allow for a larger water level differential.
Ensure adequate water volume for continuous operation.
Reduced flow rate.Partial blockage in suction or discharge.
Pump wear.
Clean suction grille and check discharge pipe.
Kan si oṣiṣẹ iṣẹ ti o peye fun ayewo.

8. Imọ ni pato

Detailed specifications for the DAB FEKA 600 MA pump.

ParamitaIye
AwoṣeFEKA 600 MA
Agbara0.70 HP
Voltage230 V (2.3E+2 Volts)
Oṣuwọn Sisan ti o pọju16 m³/h (16,000 liters/hour)
Max Ori7.5 m
Max Immersion Depth7 m
Pumped Liquid TypeWastewater and Rainwater
Free Passage of Solids25 mm
Min Admission Level38 mm
Liquid otutu Range+0°C to +35°C (domestic use)
+0°C to +50°C (other uses)
Kilasi IdaaboboIP68
Ohun eloTechnopolymer body, Stainless Steel motor (AISI 304), Steel shaft (AISI 431)
Awọn iwọn (isunmọ.)43.4 x 26 x 19.8 cm (Apapọ)
43 x 21 x 29 cm (Pump)
Ìwọ̀n (isunmọ́.)6.24 kg

For complete technical details, please refer to the official product documentation provided by DAB PUMPS.

9. Atilẹyin ọja ati Support

Information regarding product warranty and customer support.

9.1 atilẹyin ọja Alaye

Specific warranty terms and conditions are typically provided with your purchase documentation or can be found on the manufacturer's official webojula. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

9.2 Onibara Support

For technical assistance, spare parts, or service inquiries, please contact your authorized DAB PUMPS dealer or visit the official DAB PUMPS webojula fun alaye olubasọrọ.

Official commercial profile of the Feka range: DAB FEKA Commercial Profile.

Awọn iwe aṣẹ ti o jọmọ - FEKA600

Ṣaajuview DAB FEKA 600 Submersible Sewage Pump - Technical Specifications and Performance
Explore the DAB FEKA 600 submersible sewage pump. This document provides comprehensive technical data, performance curves, material specifications, electrical details, and dimensions for domestic wastewater applications.
Ṣaajuview Guía Rápida de Selección de Bombas DAB: Encuentre la Solución Ideal
Descubra la guía rápida de selección de bombas DAB para aplicaciones domésticas, industriales y de riego. Encuentre la bomba perfecta para sus necesidades de agua, desde suministro hasta gestión de aguas residuales.
Ṣaajuview NOVA UP MAE - Manuale di Installazione ati Manutenzione DAB
Manuale completo fun l'fi sori ẹrọ, l'uso e la manutenzione della pompa sommergibile DAB NOVA UP MAE. Pẹlu dati tecnici, avvertenze di sicurezza e guida alla risoluzione dei problemi.
Ṣaajuview DAB Pulsar Dry Submersible Pump Quick Start Guide
Concise guide for installing and operating the DAB Pulsar Dry submersible pump, including technical specifications, safety precautions, and connection details.
Ṣaajuview Ilana fifi sori ẹrọ ati Manutenzione DAB DIVERTRON
Itọnisọna fun fifi sori ẹrọ, o nilo lati ṣe iranlọwọ fun ọ lati ṣe agbero DAB DIVERTRON, pẹlu awọn ilana ati awọn iṣoro risoluzione.
Ṣaajuview DAB Digital Redio Awọn idari ati Eto
Itọsọna kan si awọn iṣakoso ati awọn eto ti olugba oni nọmba DAB, pẹlu yiyan ibudo, awọn atokọ ikanni, awọn iṣẹ wiwa, ati awọn ayanfẹ eto.