LEXIN FT4 PRO Motorcycle Bluetooth Headset

Ọrọ Iṣaaju

The LEXIN FT4 PRO is an advanced motorcycle Bluetooth communication system designed to enhance your riding experience. It features a 4-way intercom system, integrated headlamp with SoS mode, LexinPulse 40MM speakers for superior audio, and a long-lasting battery. This manual provides detailed instructions for the proper setup, operation, and maintenance of your FT4 PRO unit.

Ọja Awọn ẹya ara ẹrọ

• Incredible Sound Quality: Equipped with LexinPulse 40MM Speakers for clear audio at any speed.
• Integrated Utility Headlamp: First-of-its-kind headlamp with optional SoS mode for low-light conditions and emergencies.
• Simultaneous 4-Way Intercom: Supports communication between up to four riders over a long range.
• Bluetooth 4.0 Asopọmọra: Seamlessly connect to mobile phones, GPS devices, and other Bluetooth-enabled devices.
• Rédíò FM tí a ṣe sínú rẹ̀: Includes 6 available station presets.
• Selectable 7-Color RGB LED Trim Light: Customize the look of your unit with various LED colors.
• Gbigba agbara iyara Iru-C: Efficient and fast charging capability.

Ẹrọ ti pariview

Familiarize yourself with the main components and controls of your LEXIN FT4 PRO unit.

Image: The LEXIN FT4 PRO unit, displaying its primary controls, including the central jog dial, 'A' and 'B' buttons, and the integrated headlamp. A blue LED strip is visible along the top edge.

The unit typically includes a central multi-function button/jog dial, dedicated 'A' and 'B' buttons for intercom and other functions, a charging port (Type-C), and the integrated headlamp.

Ṣeto

1. Ngba agbara si Unit

Before first use, fully charge the FT4 PRO unit. Connect the provided USB Type-C cable to the charging port on the device and to a compatible USB power source. The LED indicator will show charging status and turn off when fully charged.

Image: An illustration highlighting the 800mAh battery capacity of the FT4 PRO, indicating approximately 2 hours charging time, 15 hours talk time, and 14 days standby time.

2. Fifi sori ẹrọ lori ibori

The FT4 PRO is designed for easy installation on most open face, modular, and full-face helmets. Refer to the included installation guide for specific mounting instructions using the provided clamps and adhesive options. Ensure the unit is securely attached and the speakers are positioned correctly inside the helmet for optimal audio.

Awọn ilana Iṣiṣẹ

1. Agbara Tan / Paa

• Agbara Tan: Press and hold the main multi-function button until the LED indicator lights up.
• Agbara Pa: Press and hold the main multi-function button until the LED indicator turns off.

2. Atunse iwọn didun

Rotate the central jog dial clockwise to increase volume and counter-clockwise to decrease volume.

3. Bluetooth Pairing with Mobile Devices/GPS

To connect your FT4 PRO to a mobile phone or GPS device:

1. Ensure the FT4 PRO is powered off.
2. Press and hold the main multi-function button until the LED flashes rapidly, indicating pairing mode.
3. On your mobile device or GPS, enable Bluetooth and search for new devices.
4. Select 'LEXIN FT4 PRO' from the list of available devices.
5. Once connected, the LED indicator on the FT4 PRO will change to a steady blue light.

Image: A motorcyclist with the FT4 PRO unit on their helmet, illustrating its connectivity capabilities including Bluetooth intercom, GPS navigation, music playback, phone calls, and voice assistant integration.

4. Sisisẹsẹhin Orin

• Ṣiṣẹ/Daduro: Short press the main multi-function button.
• Orin t’okan: Rotate the jog dial clockwise and hold briefly.
• Tẹlẹ Orin: Rotate the jog dial counter-clockwise and hold briefly.

5. Awọn ipe foonu

• Idahun Ipe: Short press the main multi-function button.
• Ipe Ipari: Short press the main multi-function button during a call.
• Kọ Ipe: Press and hold the main multi-function button when a call comes in.
• Nọmba Ikẹhin Tun Tun: Double-press the main multi-function button.

6. Redio FM

• Tan/Pa redio FM: Consult the specific button combination in your quick start guide (often a long press of a specific button or combination).
• Àwọn Ibùdó Ṣíṣàyẹ̀wò: Short press the 'A' or 'B' button to scan for the next/previous station.
• Fi awọn tito tẹlẹ pamọ: The unit supports up to 6 station presets. Refer to the quick start guide for saving procedures.

7. Intercom ibaraẹnisọrọ

The FT4 PRO supports up to 4 riders for intercom communication.

Image: A visual representation of the LX-FT4Pro Helmet Communication System, showing up to 4 riders communicating simultaneously within a 1.2-mile range.

Intercom Pairing (Multiple Units)

To establish intercom connection between two or more FT4 PRO units:

1. Ensure both units are powered off.
2. On both units, press and hold the main multi-function button and the 'A' button simultaneously until the LED flashes rapidly, indicating intercom pairing mode.
3. The units will automatically search and pair with each other. Once connected, the LED will change to a steady blue.
4. Repeat this process for additional units (up to 4) to form a group intercom.

Image: Demonstrates the Universal Pairing feature, showing the FT4 PRO's compatibility with other brands of Bluetooth intercom units.

Initiating/Ending Intercom Calls

• Bẹrẹ Intercom: Short press the 'A' button to initiate a call with the first paired unit. Press 'B' for the second.
• Ipari Intercom: Short press the 'A' or 'B' button again to end the intercom call.

8. Utility Headlamp & SoS Mode

The integrated headlamp provides illumination in low-light conditions. The SoS mode activates a flashing light pattern for emergency signaling.

Image: The Utility Headlamp with SoS Strobe feature, showing how the light can assist with repairs or provide safety in dark environments.

• Turn On/Off Headlamp: Refer to your quick start guide for the specific button press (e.g., double-press the headlamp button or a combination).
• Activate SoS Mode: Typically, a long press of the headlamp button or a specific combination will activate the SoS flashing pattern.

9. LED Trim Light

The FT4 PRO features a customizable RGB LED trim light with 7 color options.

Image: A display of the 7 Colors LED Trim light feature, showing various color options that can illuminate the helmet for increased visibility and personalization.

• Yi Awọ: Short press the dedicated LED button (if available) or a specific button combination to cycle through the 7 colors.

Itọju & Itọju

• Ninu: Lo asọ, damp Aṣọ láti fi nu ẹ̀rọ náà. Yẹra fún àwọn kẹ́míkà líle tàbí àwọn ohun ìfọmọ́ tí ó máa ń pa ara.
• Itọju Batiri: To prolong battery life, avoid fully discharging the unit frequently. Charge the unit regularly, especially if stored for long periods.
• Ibi ipamọ: Tọju ẹyọ naa ni itura, aye gbigbẹ nigbati ko si ni lilo.
• Omi Resistance: The unit is waterproof, but avoid prolonged submersion. Ensure charging port cover is securely closed.

Laasigbotitusita

Imọ ni pato

Atilẹyin ọja ati Support

For detailed warranty information and customer support, please refer to the official LEXIN webojula tabi kan si wọn onibara iṣẹ taara. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

Olupese: LEXIN
Ibi Iṣowo: Mississauga, ON L5N 1L8, CA