Amewi 22431 ACV730 1:14 Scale RC Tracked Excavator Instruction Manual

Ọrọ Iṣaaju

O ṣeun fun riraasing the Amewi 22431 ACV730 1:14 Scale RC Tracked Excavator. This sophisticated and high-quality replica of a heavy tracked excavator offers a realistic operating experience with high fidelity to detail and premium materials. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure you get the most out of your model.

Image: The Amewi ACV730 RC Tracked Excavator, showcasing its detailed design and robust construction.

Awọn Ikilọ Abo

• Iṣeduro ọjọ ori: Ọjà yìí dára fún àwọn ọmọdé ọmọ ọdún mẹ́ta àti jù bẹ́ẹ̀ lọ. A gbani nímọ̀ràn láti bójútó àwọn àgbàlagbà.
• Aabo Batiri: Use only the specified Li-Ion battery (7.4V, 1200mAh, JST-BEC plug). Do not mix old and new batteries, or different types of batteries. Always remove batteries when not in use for extended periods.
• Gbigba agbara: Charge batteries using the provided USB charging cable only. Do not overcharge.
• Ayika Ṣiṣẹ: The model is designed for outdoor use with splash water protection. Avoid operating in heavy rain or extreme wet conditions. Keep away from water bodies.
• Awọn ẹya gbigbe: Keep fingers, hair, and loose clothing away from moving parts such as tracks and the excavator arm to prevent injury.
• Ìjánu: The 2.4 GHz control system minimizes interference, but avoid operating near other radio-controlled devices to ensure optimal control.
• Idaabobo Apọju: The transmission parts in the arms are equipped with overload protection. Do not force movements if resistance is encountered.

Package Awọn akoonu

Jọwọ ṣayẹwo awọn akoonu package lati rii daju pe gbogbo awọn ohun kan wa:

• Amewi ACV730 RC Tracked Excavator (1:14 Scale)
• 2.4 GHz Remote Control (European standard)
• Okun Ngba agbara USB
• Instruction Manual (German/English)

Note: The 7.4V Li-Ion 1200mAh battery for the excavator and batteries for the remote control are not included and must be purchased separately.

Ṣeto

1. Battery Installation (Excavator)

1. Locate the battery compartment on the excavator, typically under a removable cover on the chassis or rear.
2. Ṣii ideri iyẹwu batiri naa.
3. Connect the 7.4V Li-Ion 1200mAh battery (JST-BEC plug) to the excavator's power connector. Ensure correct polarity.
4. Fi batiri naa sinu yara naa pẹlu iṣọra ki o si pa ideri naa mọ lailewu.

Image: The 7.4V Li-Ion 1200mAh battery pack with its JST-BEC connector, used to power the excavator.

2. Fifi sori batiri (Iṣakoso latọna jijin)

1. Wa yara batiri ni ẹhin isakoṣo latọna jijin.
2. Ṣii ideri iyẹwu batiri naa.
3. Insert the required batteries (e.g., AA or AAA, refer to remote control markings) into the compartment, observing the correct polarity (+/-).
4. Pa ideri batiri naa ni aabo.

Image: The 2.4 GHz remote control for the Amewi ACV730 excavator, showing its dual joysticks and control buttons.

3. Charging the Excavator Battery

1. Connect the JST-BEC plug of the excavator battery to the USB charging cable.
2. So okùn gbigba agbara USB pọ mọ orisun agbara USB ti o yẹ (fun apẹẹrẹ, ibudo USB kọmputa, adapter odi USB).
3. The charging indicator on the USB cable will show the charging status (e.g., red for charging, green for fully charged).
4. Charging typically takes a few hours. Do not leave unattended during charging.

Awọn ilana Iṣiṣẹ

1. Agbara Tan / Paa

• Turn on the remote control first using its power switch.
• Turn on the excavator using its power switch (usually located near the battery compartment or under the cabin).
• The remote control and excavator should automatically pair. An indicator light on both devices will confirm successful pairing.
• To power off, turn off the excavator first, then the remote control.

2. Basic Controls (European Standard)

The remote control features a European standard control layout, similar to real excavators, allowing for precise and independent control of various functions.

• Joystick osi: Controls the movement of the tracks (forward, backward, left, right). Tracks are individually controllable for realistic maneuvering.
• Joystick Ọtun: Controls the excavator arm and bucket movements (up, down, extend, retract, scoop, dump).
• Turret Rotation: Use dedicated buttons or a specific joystick input to rotate the turret 360 degrees.
• Imọlẹ ati Ohun: Activate realistic light and sound effects using designated buttons on the remote control.
• Awọn iṣẹ miiran: Explore the 22 available functions through various button combinations or additional controls on the remote. Refer to the remote control diagram in the included manual for specific button assignments.

Aworan: Oke-isalẹ view of the excavator's cabin and arm, illustrating the range of motion and detailed components.

Image: Close-up of the excavator arm's hydraulic-like mechanism, demonstrating its articulation.

Itoju

1. Ninu

• After each use, especially outdoors, gently wipe down the excavator with a soft, dry cloth to remove dirt and dust.
• Fun idoti alagidi, die-die damp cloth can be used, but ensure no water enters electronic components.
• Clean the tracks regularly to prevent debris from hindering movement.

2. Ibi ipamọ

• Store the excavator and remote control in a cool, dry place away from direct sunlight and extreme temperatures.
• Remove all batteries from both the excavator and the remote control if storing for an extended period to prevent leakage.

Laasigbotitusita

• Excavator not responding:
  • Ensure both the excavator and remote control are powered on.
  • Check if batteries in both devices are fully charged and correctly installed.
  • Verify that the remote control and excavator are properly paired.
• Weak performance or short runtime:
  • The excavator battery may need recharging.
  • Remote control batteries may be low and need replacement.
• Arm or bucket not moving correctly:
  • Check for any obstructions in the arm or bucket mechanism.
  • Ensure the overload protection has not been triggered. Reduce the load if attempting to lift heavy objects.
• Interference during operation:
  • Move to an area away from other radio-controlled devices or strong electromagnetic sources.

Awọn pato

Atilẹyin ọja ati Support

For warranty information, technical support, or spare parts inquiries, please contact Amewi customer service directly. Refer to the contact details provided on the product packaging or the official Amewi webAaye ayelujara. Jọwọ mú nọ́mbà àwòṣe rẹ (22431) àti ẹ̀rí ríra rẹ wà ní ìmúrasílẹ̀ nígbà tí o bá ń kàn sí olùrànlọ́wọ́.