Intel Wi-Fi 6 (Gig+) Desktop Kit AX200 User Manual

1. Ifihan

This manual provides detailed instructions for the installation, operation, and maintenance of your Intel Wi-Fi 6 (Gig+) Desktop Kit AX200. This kit is designed to upgrade your desktop computer with Wi-Fi 6 (802.11ax) and Bluetooth 5.0 capabilities, offering enhanced wireless performance and security.

1.1 Package Awọn akoonu

Daju pe gbogbo awọn ohun ti a ṣe akojọ rẹ si isalẹ wa ninu package ọja rẹ:

• Intel® Wi-Fi 6 AX200 (Gig+) adapter (M.2 2230 module)
• Optimized external antennas (2)
• Standard size mounting bracket with RF cables installed
• Pro kekerefile iṣagbesori akọmọ

Image 1.1: Contents of the Intel Wi-Fi 6 Desktop Kit AX200.

2. Eto ati fifi sori

Before proceeding with installation, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

2.1 Awọn ibeere Ibamu

• Motherboard must have an M.2 Key E slot.
• Operating System: Windows 10 64-bit.
• Not compatible with systems containing an Intel 9560 CNVI part or systems with a BIOS lock.

2.2 fifi sori Igbesẹ

1. Mura kọmputa rẹ: Power down your computer, unplug the power cord, and open the computer case.
2. Locate the M.2 Key E slot: Refer to your motherboard's manual to identify the M.2 Key E slot.
3. Install the AX200 module: Gently insert the Intel Wi-Fi 6 AX200 M.2 module into the M.2 Key E slot at a 30-degree angle. Press down and secure it with the provided screw (if not included, use a compatible M.2 screw from your motherboard accessories).
4. Attach RF cables to the module: Carefully snap the two small RF cables from the mounting bracket onto the corresponding connectors on the AX200 module. Ensure they are securely attached.
5. Fi sori ẹrọ akọmọ iṣagbesori: Choose either the standard or low-profile mounting bracket based on your PC case. Secure the bracket into an available PCIe slot opening on your computer case.
6. Connect external antennas: Screw the two optimized external antennas onto the connectors on the mounting bracket. Position the antennas for optimal signal reception.

Image 2.1: Components ready for installation, showing the M.2 module, cables, bracket, and antennas.

Image 2.2: The two external antennas.

2.3 Driver fifi sori

After hardware installation, close your computer case, plug in the power cord, and power on your computer. Windows 10 should automatically detect and install the necessary drivers for the Intel Wi-Fi 6 AX200 module. If drivers are not automatically installed, or if you experience issues, download the latest drivers from the official Intel support webojula.

3. Isẹ

3.1 Nsopọ si Wi-Fi

1. Once drivers are installed, click the Wi-Fi icon in the Windows taskbar.
2. Yan nẹtiwọki Wi-Fi ti o fẹ lati atokọ ti awọn nẹtiwọki ti o wa.
3. Click 'Connect' and enter the network security key (password) if prompted.
4. Kọ̀ǹpútà rẹ yẹ kí ó ti so mọ́ nẹ́tíwọ́ọ̀kì Wi-Fi báyìí.

3.2 Sísopọ̀ Àwọn Ẹ̀rọ Bluetooth

1. Lọ sí Ètò Windows > Àwọn Ẹ̀rọ > Bluetooth & àwọn ẹ̀rọ míràn.
2. Rí i dájú pé Bluetooth ti wa ni 'Tan'.
3. Tẹ 'Fi Bluetooth tabi ẹrọ miiran kun' ki o si yan 'Bluetooth'.
4. Put your Bluetooth device into pairing mode (refer to your device's manual).
5. Yan ẹrọ rẹ lati inu akojọ naa ki o tẹle eyikeyi awọn ilana loju iboju lati pari isopọmọ.

Image 3.1: Bluetooth Wireless Technology Support.

4. Itọju

The Intel Wi-Fi 6 Desktop Kit AX200 requires minimal maintenance. Keep your computer's interior clean from dust to ensure proper airflow and prevent overheating of components. Regularly update your Wi-Fi and Bluetooth drivers from the official Intel webaaye lati rii daju iṣẹ ṣiṣe ati aabo to dara julọ.

5. Laasigbotitusita

5.1 Wọpọ Oran ati Solusan

• No Wi-Fi or Bluetooth detected:
  • Ensure the AX200 module is correctly seated in the M.2 slot and secured.
  • Verify that the RF cables are securely connected to the module and antennas.
  • Check Device Manager in Windows to see if the device is recognized and drivers are installed. Reinstall drivers if necessary.
  • Confirm your motherboard has an M.2 Key E slot and is not subject to BIOS lock.
• Slow Wi-Fi speeds or frequent disconnections:
  • Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
  • Update your Wi-Fi drivers to the latest version from Intel's webojula.
  • Check antenna connections and position them for better signal.
  • Dín ìdènà láti ọ̀dọ̀ àwọn ẹ̀rọ itanna mìíràn kù.
• Ẹrọ Bluetooth ko so pọ:
  • Ensure Bluetooth is enabled in Windows settings.
  • Fi ẹrọ Bluetooth sinu ipo sisọ pọ.
  • Remove and re-add the device in Windows Bluetooth settings.
  • Ṣe imudojuiwọn awọn awakọ Bluetooth.

For further assistance, refer to the Intel support website or contact Intel customer service.

6. Awọn pato

7. Atilẹyin ọja ati Support

Intel products are backed by a limited warranty. For specific warranty terms and conditions applicable to your region, please refer to the documentation included with your product or visit the official Intel webojula.

7.1 Imọ Support

For technical assistance, driver downloads, and additional resources, please visit the official Intel Support webojula:

Atilẹyin Intel Webojula

Intel also offers support via phone and chat. Refer to the support webaaye fun awọn alaye olubasọrọ.