TecTake Racing Office Chair Instruction Manual

1. Ifihan

Thank you for choosing the TecTake Racing Office Chair, Model 800774. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

2. Alaye Aabo

IKILO:

• Always follow the assembly instructions carefully to ensure the chair is correctly assembled and stable.
• Exercise caution when adjusting the chair's height using the safety gas spring to prevent injuries.
• Do not exceed the maximum weight capacity of 120 kg (264 lbs) to maintain the chair's stability and safety.
• Ensure all screws are tightened securely after assembly and periodically check for any loosening.

3. Awọn ẹya Ọja

The TecTake Racing Office Chair is designed for comfort and functionality, featuring:

• Modern ati ergonomic apẹrẹ.
• Robust and resistant structure.
• Thick padding for comfortable seating.
• Upholstered in soft synthetic leather with breathable mesh inserts.
• Continuously adjustable height with safety gas lift.
• Adjustable tilt mechanism.
• 360-ìyí yiyi.
• Stable base with 5 floor-friendly double castors.
• Curved and resistant armrests.

Figure 1: Key features of the TecTake Racing Office Chair.

Nọmba 2: Alaye view of upholstery, armrests, mesh, and control lever.

4. Apejọ Awọn ilana

The TecTake Racing Office Chair is designed for quick and straightforward assembly. Please ensure all components are present before beginning.

4.1 Ṣiṣii silẹ

1. Ni ifarabalẹ yọ gbogbo awọn paati kuro ninu apoti.
2. Verify that all parts listed in the included assembly guide are present and undamaged.

4.2 Igbesẹ-nipasẹ-Igbese Apejọ

Refer to the detailed assembly instructions provided in the box. General steps typically include:

1. Attach the castors to the chair base.
2. Fi silinda gbe gaasi sinu ipilẹ.
3. Secure the seat mechanism to the underside of the seat cushion.
4. Attach the armrests to the seat. Note that armrests may be side-specific; ensure correct orientation.
5. Connect the backrest to the seat and armrests. This step may require some force to align holes due to the curved design.
6. Gbe ijoko ti o pejọ ati ẹhin ẹhin sori silinda gbigbe gaasi.

Imọran: For attaching the backrest to the seat, it may be easier with two people or by positioning the seat on a stable surface with the backrest hanging to apply necessary pressure for screw alignment.

5. Awọn ilana Iṣiṣẹ

Your TecTake Racing Office Chair offers several adjustable features to customize your seating experience.

5.1 Giga tolesese

Lati ṣatunṣe giga ti alaga:

1. To raise the chair: Lift the lever located under the right side of the seat while taking your weight off the seat. The chair will rise automatically.
2. To lower the chair: Lift the lever located under the right side of the seat while seated. The chair will lower under your weight.
3. Release the lever to lock the chair at the desired height.

5.2 Tilt Mechanism

The chair features an adjustable tilt mechanism for reclining:

1. To enable tilt: Pull the same lever used for height adjustment outwards.
2. To lock the chair in an upright position: Push the lever inwards.

The tension of the tilt mechanism can often be adjusted by a knob located under the front of the seat. Turn clockwise to increase tension (making it harder to tilt) and counter-clockwise to decrease tension (making it easier to tilt).

Figure 3: Chair recline range and adjustment points.

5.3 Yiyi iwọn 360-360

The chair is designed to rotate 360 degrees freely on its base, allowing for easy movement and access within your workspace.

6. Itọju

Proper care and maintenance will extend the life of your TecTake Racing Office Chair.

6.1 Ninu

• For general cleaning, wipe the chair with a damp asọ.
• Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the synthetic leather and mesh fabric.
• Fun awọn itusilẹ, paarẹ lẹsẹkẹsẹ pẹlu asọ ti o mọ, ti o gbẹ.

6.2 igbakọọkan sọwedowo

• Máa ṣàyẹ̀wò gbogbo àwọn skru àti bọ́ọ̀lù láti rí i dájú pé wọ́n lẹ̀ mọ́lẹ̀. Mú wọn lẹ̀ tí ó bá pọndandan láti jẹ́ kí ó dúró ṣinṣin àti ààbò.
• Inspect the castors for any debris (hair, lint) that might hinder smooth movement. Clean as needed.
• Ensure the gas lift operates smoothly. If it becomes stiff or inconsistent, contact customer support.

7. Laasigbotitusita

Ti o ba pade eyikeyi awọn ọran pẹlu alaga rẹ, tọka si awọn iṣoro ati awọn solusan ti o wọpọ atẹle wọnyi.

7.1 Chair Sinks or Does Not Hold Height

• Nitori: Gas gbe silinda aiṣedeede tabi lefa ko ni kikun išẹ.
• Ojutu: Ensure the height adjustment lever is fully released after setting the height. If the issue persists, the gas lift cylinder may need replacement. Contact customer support.

7.2 Chair Wobbles

• Nitori: Loose skru tabi uneven ijọ.
• Ojutu: Check and tighten all assembly screws, especially those connecting the seat to the mechanism and the backrest to the seat/armrests. Ensure the chair is on a flat, even surface.

7.3 Castors Not Rolling Smoothly

• Nitori: Debris caught in castors or damaged castors.
• Ojutu: Turn the chair over and carefully remove any hair, lint, or other debris from the castor wheels. If a castor is damaged, it may need replacement.

8. Awọn pato

Figure 4: Detailed product dimensions and weight capacity.

9. Atilẹyin ọja ati Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official TecTake webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.