1. Ifihan
The TC Electronic Flashback 2 Mini Delay is a compact and powerful delay pedal designed for guitarists. It features next-generation delay algorithms, the innovative MASH footswitch for expressive control, and TonePrint technology for custom sound creation. This manual provides essential information for setting up, operating, and maintaining your Flashback 2 Mini Delay pedal.
2. Awọn Ilana Aabo pataki
- Ka awọn itọnisọna wọnyi daradara ṣaaju ki o to ṣiṣẹ ẹrọ naa.
- Pa awọn ilana wọnyi fun itọkasi ọjọ iwaju.
- Tẹle gbogbo awọn ikilọ ki o tẹle gbogbo awọn ilana.
- Maṣe lo ohun elo yii nitosi omi.
- Mọ pẹlu asọ gbigbẹ nikan.
- Ma ṣe dina eyikeyi awọn ṣiṣi atẹgun. Fi sori ẹrọ ni ibamu pẹlu awọn ilana ti olupese.
- Maṣe fi sori ẹrọ nitosi awọn orisun ooru gẹgẹbi awọn imooru, awọn iforukọsilẹ ooru, awọn adiro, tabi awọn ohun elo miiran (pẹlu ampliifiers) ti o gbe ooru jade.
- Lo awọn asomọ/awọn ẹya ara ẹrọ ti olupese pato.
- Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye. Iṣẹ iṣẹ nilo nigbati ohun elo ba ti bajẹ ni ọna eyikeyi.
3. Package Awọn akoonu
Jọwọ ṣayẹwo package fun awọn nkan wọnyi:
- TC Electronic Flashback 2 Mini Delay Pedal
- Afowoyi Olumulo (iwe-ipamọ yii)
- TC Electronic sticker
Note: A 9V DC power supply (not included) is required for operation.
4. Awọn iṣakoso ati Awọn asopọ
olusin 1: Iwaju view of the Flashback 2 Mini Delay pedal, showing the three control knobs and the MASH footswitch.
4.1 Top Panel idari
- Kọ́nì ìdádúró: Controls the delay time, from short slap-back echoes to long, ambient repeats.
- F.BACK Knob: Adjusts the number of repeats (feedback) for the delay effect. Turn clockwise for more repeats, counter-clockwise for fewer.
- Ipele koko: Sets the mix level of the delayed signal relative to the dry signal.
- MASH Footswitch: This multi-functional footswitch acts as an on/off switch with a single tap. Pressing and holding the footswitch engages the MASH expression control, allowing you to dynamically control various delay parameters depending on the selected TonePrint.
olusin 2: Angled view of the Flashback 2 Mini Delay pedal, highlighting the input, output, and power connections.
4.2 Side Panel Connectors
- Jack INPUT: Connect your guitar or the output of another pedal here using a standard 1/4-inch instrument cable.
- Jade Jack: Connect this to your amplifier or the input of the next pedal in your signal chain using a standard 1/4-inch instrument cable.
- Iṣawọle agbara 9V DC: Connect a standard 9V DC, center-negative power supply (not included) here.
- Ibudo USB: Used for connecting the pedal to a computer for TonePrint editing and firmware updates.
5. Eto
Follow these steps to connect your Flashback 2 Mini Delay pedal:
- Rii daju rẹ amplifier is turned off or its volume is set to zero.
- Connect your guitar (or the output of a preceding pedal) to the ÀWỌN Ọ̀RỌ̀ jack of the Flashback 2 Mini using a 1/4-inch instrument cable.
- Sopọ awọn IJADE jack of the Flashback 2 Mini to your amplifier (or the input of a subsequent pedal) using another 1/4-inch instrument cable.
- Connect a 9V DC, center-negative power supply (not included) to the 9V DC Power Input.
- Ni kete ti gbogbo awọn asopọ ba wa ni aabo, o le tan ina rẹ amplifier and begin using the pedal.
6. Operating the Flashback 2 Mini
6.1 Ipilẹ isẹ
To activate the delay effect, simply tap the MASH footswitch. The LED indicator will illuminate. Tap it again to bypass the effect. Adjust the DELAY, F.BACK, and LEVEL knobs to shape your desired delay sound.
6.2 MASH Footswitch Functionality
The MASH footswitch offers pressure-sensitive expression control. While the effect is active, press and hold the footswitch with varying pressure to dynamically control a specific parameter of the delay. The parameter controlled by MASH is determined by the selected TonePrint. For example, MASH can control delay time, feedback, modulation, or other effects.
6.3 TonePrint Feature
TonePrint allows you to load custom delay sounds created by TC Electronic and famous artists, or design your own using the free TonePrint Editor software. To load a TonePrint:
- Download the free TC Electronic TonePrint App for your smartphone or the TonePrint Editor for your computer.
- Using the app, select a TonePrint and 'beam' it to your pedal by holding your phone's speaker near your guitar pickup.
- Alternatively, connect the pedal to your computer via the USB port and use the TonePrint Editor software to load or create custom sounds.
6.4 Delay Algorithms
The Flashback 2 Mini features a range of high-quality delay algorithms, including new Tape and Analog algorithms for classic delay tones, and Crystal Delay algorithms based on the Sub'n'Up Octaver for unique, shimmering effects.
6.5 Bypass Modes (True Bypass / Buffered Bypass)
The pedal offers switchable bypass modes: True Bypass and Buffered Bypass. True Bypass ensures that your signal remains completely unaltered when the pedal is off, while Buffered Bypass provides a strong, clean signal over long cable runs. The bypass mode can typically be switched via an internal dip switch or through the TonePrint Editor software. Refer to the TonePrint Editor documentation for specific instructions on changing the bypass mode.
7. Itọju
- Jẹ́ kí pedal náà mọ́ nípa fífi aṣọ rírọ̀ tí ó gbẹ nu ún. Yẹra fún lílo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
- Tọ́jú pedal náà sí ibi gbígbẹ, kúrò níbi tí ooru àti ọ̀rinrin bá pọ̀ sí.
- Ensure all cables are securely connected during use and disconnected when not in use to prevent accidental damage.
8. Laasigbotitusita
- Ko si Ohun: Check all cable connections. Ensure the power supply is correctly connected and functioning. Verify that your amplifier is on and its volume is up.
- Ohùn tí kò lágbára tàbí tí kò dára: Check cable integrity. Ensure the power supply provides the correct voltage (9V DC) and polarity (center-negative). Adjust the LEVEL knob on the pedal.
- Pẹdali ti ko tan: Confirm the power supply is connected and working. Try a different power outlet or power supply.
- MASH Footswitch Not Responding: Ensure the pedal is powered on and the effect is active. If using a custom TonePrint, verify that MASH control is assigned to a parameter within the TonePrint Editor.
- TonePrint Transfer Issues: Ensure your smartphone speaker is placed directly over your guitar pickup for beaming. For USB connection, ensure the correct drivers are installed and the TonePrint Editor software is up to date.
9. Awọn pato
| Iwọn Nkan | 7.1 iwon (200 Giramu) |
| Ọja Mefa | 3.66"L x 2.01"W x 1.97"H (9.3 x 5.1 x 5 cm) |
| Orisun agbara | Corded Electric (9V DC, center-negative, not included) |
| Voltage | 9 Volts |
| Ni wiwo Hardware | USB |
| Ilana ifihan agbara | Analog (Analog-Dry-Through) |
| Ipo Fori | Switchable True Bypass / Buffered Bypass |
10. Atilẹyin ọja ati Support
TC Electronic products are designed for reliability and performance. For detailed warranty information, please refer to the warranty card included with your product or visit the official TC Electronic website. For technical support, firmware updates, or to access the TonePrint Editor, please visit the TC Electronic support page online.
You can find additional resources and contact information at: www.tcletronic.com
