1. Ifihan
This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your SmallRig Camera Cage CCF2808, designed specifically for the FUJIFILM X-T4 camera. This aluminum alloy cage enhances the camera's protection and expands its accessory mounting capabilities.
Image 1.1: SmallRig Camera Cage CCF2808 installed on a FUJIFILM X-T4 camera.
2. Package Awọn akoonu
Jẹrisi pe gbogbo awọn paati wa ninu package rẹ:
- 1 x SmallRig Camera Cage CCF2808
- 1 x Built-in Flat Head Screwdriver (magnetically attached to the cage base)
Image 2.1: Package contents and product dimensions.
3. Eto ati fifi sori
Follow these steps to securely attach the camera cage to your FUJIFILM X-T4 camera:
- Mura Kamẹra naa: Ensure your FUJIFILM X-T4 camera is powered off.
- Align the Cage: Carefully place the camera into the cage, aligning the 1/4"-20 screw hole on the camera's base with the corresponding screw on the cage. Ensure the anti-twist pin on the cage base engages with the camera's anti-twist hole for added stability.
- Ṣe aabo kamẹra naa: Use the built-in flat head screwdriver, located magnetically at the bottom of the cage, to tighten the 1/4"-20 screw. Tighten until the camera is firmly secured within the cage, but do not overtighten.
Image 3.1: Detail of the secure mounting mechanism with 1/4"-20 screw and anti-twist pin.
4. Àwọn Ẹ̀yà ara àti Lílò
The SmallRig Camera Cage CCF2808 offers various features for expanding your camera setup:
4.1 Multiple Mounting Points
The cage is equipped with multiple 1/4"-20, 3/8"-16, and ARRI locating holes for attaching a wide range of accessories such as top handles, side handles, monitor mounts, and more.
4.2 NATO Rail and Cold Shoe Mount
A NATO rail is integrated on the left side of the cage, allowing for quick attachment and detachment of NATO-compatible accessories like NATO handles. A cold shoe mount is located on the top of the cage, suitable for mounting microphones, LED lights, or other cold shoe accessories.
Aworan 4.1: Pariview of multiple mounting points on the cage.
4.3 Arca-Swiss Plate Integration
The bottom of the cage features an integrated Arca-Swiss plate, enabling quick transitions between Arca-Swiss compatible tripods and stabilizers without needing to remove the cage.
Image 4.2: Arca-Swiss plate integration for quick mounting on tripods and gimbals.
4.4 Optional Cable Clamp Asomọ
For enhanced cable management and protection, an optional dedicated HDMI & USB Cable Clamp (model BSC2809, sold separately) can be attached to the cage. This prevents accidental disconnections and damage to camera ports.
Image 4.3: Attachment point for the optional Cable Clamp BSC2809.
4.5 Ergonomic Design
The cage features an ergonomic design that provides a comfortable grip, improving handling during extended use.
Image 4.4: Ergonomic design for comfortable handling.
5. Itọju
To ensure the longevity and optimal performance of your SmallRig Camera Cage CCF2808, follow these maintenance guidelines:
- Ninu: Fi aṣọ rírọrùn àti gbígbẹ nu àgò náà láti mú eruku àti ìka ọwọ́ kúrò. Fún eruku líle, lo ẹ̀rọ díẹ́ díẹ̀.amp cloth and dry thoroughly. Avoid abrasive cleaners or solvents.
- Ayewo: Periodically check all screws and mounting points for tightness. Re-tighten if necessary to prevent accidental camera movement or damage.
- Ibi ipamọ: Store the cage in a dry, clean environment when not in use.
6. Awọn pato
| Iwa | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Nọmba awoṣe | CCF2808 |
| Ibamu | FUJIFILM X-T4 Camera |
| Ohun elo | Aluminiomu Alloy |
| Ọja Mefa | 150.3 x 59 x 106 mm (5.91 x 2.32 x 4.17 inches) |
| Apapọ iwuwo | 206 g (7.3 iwon) |
| Iṣagbesori Points | 1/4"-20 threads, 3/8"-16 threads, ARRI locating holes, NATO rail, Cold shoe |
| Anti-twist Mechanism | 1/4"-20 screw with anti-twist pin |
| Awọn ọna Tu Awo | Integrated Arca-Swiss plate |
7. Laasigbotitusita
If you encounter any issues with your SmallRig Camera Cage CCF2808, consider the following:
- Camera Movement within Cage: Ensure the 1/4"-20 screw is fully tightened and the anti-twist pin is correctly engaged.
- Accessory Fit Issues: Verify that your accessories are compatible with the cage's mounting standards (e.g., 1/4"-20, 3/8"-16, ARRI, NATO, cold shoe).
- Difficulty Accessing Camera Controls: The cage is designed to maintain access to most camera controls. If a specific control is obstructed, double-check the camera's seating within the cage.
8. Atilẹyin ọja ati Support
For warranty information and customer support, please refer to the official SmallRig webojula tabi kan si wọn onibara iṣẹ taara. Tọju iwe-ẹri rira rẹ bi ẹri rira.
