VONETS VAP11AC Dual Band AC1200 Wireless Bridge Repeater Mini Router User Manual

1. Ifihan

The VONETS VAP11AC is a versatile dual-band AC1200 wireless device designed to function as a WiFi Bridge, Repeater, Mini Router, WiFi to RJ45 Ethernet Adapter, and WiFi Hotspot Signal Extender. It supports both 2.4GHz and 5GHz wireless frequencies, offering a combined theoretical data transfer rate of up to 1200Mbps. This device is equipped with a smart cooling fan for stable operation and includes a 12V/1A power supply adapter.

This manual will guide you through the setup, configuration, and operation of your VAP11AC device to ensure optimal performance in various networking scenarios.

Figure 1.1: VONETS VAP11AC device with included accessories.

2. Awọn ẹya Ọja

• Dual Band Wireless: Supports 2.4GHz (300Mbps) and 5GHz (900Mbps) for a total of 1200Mbps theoretical speed.
• Awọn ọna Iṣiṣẹ lọpọlọpọ: Functions as a WiFi Router, WiFi Signal Repeater, WiFi AP Hotspot, and WiFi Bridge.
• Asopọmọra Ethernet: Features one 10/100Mbps adaptive Ethernet port for wired connections.
• Ololufẹ Itutu agbaiye: Integrated fan for automatic heat dissipation, enhancing device stability.
• Jakejado Voltage Power Input: Operates on DC5V-24V (typical 12V/1A), with a 12V/1A power supply included.
• Apẹrẹ Iwapọ: Mini industrial design suitable for various environments.
• Signal Strength Detection (SSA): Supports reporting of signal strength.
• Memory Hotspot Function: Automatically connects to up to 100 remembered hotspots.

Figure 2.1: VAP11AC highlighting its dual-band 1200Mbps capabilities.

3. Eto Itọsọna

3.1 Package Awọn akoonu

Ṣaaju ki o to tẹsiwaju, rii daju pe gbogbo awọn nkan wa:

• VONETS VAP11AC Device
• 12V/1A Power Supply Adapter
• Ethernet Cable (approx. 30cm with RJ45 connector)
• Power Cable (approx. 30cm with DC and USB ports)

3.2 Ibẹrẹ Asopọ

1. Connect the power cable to the VAP11AC device's DC port.
2. Plug the 12V/1A power adapter into a power outlet and connect it to the power cable.
3. Wait for the device to power on. The LED indicators will illuminate.
4. For initial configuration, connect your computer to the VAP11AC device using the provided Ethernet cable. Alternatively, you can connect wirelessly to the VAP11AC's default WiFi network (SSID and password typically found on the device label or in the quick start guide).

3.3 Web Wiwọle ni wiwo

1. Ṣii a web browser on your connected computer.
2. Tẹ adirẹsi IP aiyipada sii (fun apẹẹrẹ, 192.168.254.254) sinu ọpa adirẹsi ki o tẹ Tẹ.
3. Log in using the default username and password (refer to the device label or quick start guide for credentials).
4. Once logged in, you can configure the device's operating mode and network settings.

Figure 3.1: VAP11AC with power and Ethernet connections.

4. Awọn ọna ṣiṣe

The VAP11AC supports several operating modes to suit different networking requirements.

Ipo Afárá WiFi 4.1

In Bridge mode, the VAP11AC converts a WiFi signal into a wired Ethernet connection. This is ideal for devices that only have an Ethernet port but need to connect to a wireless network, such as desktop computers, network printers, surveillance cameras, or DVRs.

1. Wọle si web interface and select Bridge mode.
2. Scan for available WiFi networks and select your desired network.
3. Enter the WiFi password if required.
4. Connect your wired device to the VAP11AC's Ethernet port.

Figure 4.1: VAP11AC in WiFi Bridge mode.

4.2 WiFi Atunse Ipo

Repeater mode extends the coverage of an existing WiFi network. The VAP11AC receives the wireless signal from your main router and re-broadcasts it, eliminating dead zones and improving signal strength in areas with weak coverage.

1. Wọle si web interface and select Repeater mode.
2. Scan for available WiFi networks and select the network you wish to extend.
3. Enter the WiFi password. The VAP11AC will then extend this network.

Figure 4.2: VAP11AC in WiFi Repeater mode and AP application.

4.3 WiFi Router Mode

In Router mode, the VAP11AC acts as a primary router, creating a new wireless network. This is suitable for scenarios where you have a wired internet connection (e.g., from a modem) and need to share it wirelessly with multiple devices.

1. Wọle si web interface and select Router mode.
2. Configure WAN settings (e.g., DHCP, Static IP, PPPoE) based on your internet service provider.
3. Set up your new WiFi network's SSID and password.
4. Connect your modem's Ethernet cable to the VAP11AC's Ethernet port.

Figure 4.3: VAP11AC in WiFi Router mode.

4.4 AP (Wiwọle Point) Ipo

AP mode allows the VAP11AC to create a wireless network from an existing wired network. This is useful for adding WiFi capabilities to a wired-only network, such as in hotel rooms or offices.

1. Wọle si web interface and select AP mode.
2. Configure the SSID and password for the new wireless network.
3. Connect the VAP11AC's Ethernet port to your wired network.

Olusin 4.4: Pariview of VAP11AC application modes.

5. Itọju

5.1 Smart Cooling Fan

The VAP11AC features a smart cooling fan designed to activate automatically after 5-10 minutes of normal operation to dissipate heat and ensure stable performance. The fan will also automatically shut down when cooling is no longer required.

This fan function can be configured manually via the web interface, allowing you to disable it, set it to automatic control, or periodic automatic control.

Figure 5.1: VAP11AC with smart cooling fan in operation.

5.2 Itọju Gbogbogbo

• Keep the device in a well-ventilated area to assist with heat dissipation.
• Yago fun ṣiṣafihan ẹrọ naa si awọn iwọn otutu to gaju, ọriniinitutu, tabi oorun taara.
• Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners.
• Rii daju pe gbogbo awọn kebulu ti sopọ ni aabo.

6. Laasigbotitusita

6.1 Ẹrọ Ko Nṣiṣẹ Tan-an

• Verify the power adapter is correctly connected to the device and a working power outlet.
• Ensure the power adapter is the correct 12V/1A type provided with the device.

6.2 Ko le Wọle si Web Ni wiwo

• Confirm your computer is connected to the VAP11AC via Ethernet or its default WiFi network.
• Ensure your computer's IP settings are configured to obtain an IP address automatically (DHCP).
• Double-check the default IP address (192.168.254.254) in your browser.
• Gbiyanju lati nu kaṣe ẹrọ aṣawakiri rẹ kuro tabi lilo ẹrọ aṣawakiri miiran.
• If you have changed the device's IP address and forgotten it, perform a factory reset (see 6.5 Factory Reset).

6.3 Ko si Asopọ Ayelujara

• In Repeater or Bridge mode, ensure the VAP11AC is successfully connected to your main router's WiFi network and the password is correct.
• In Router mode, verify your WAN settings are correctly configured for your internet service provider.
• Check the status of your main router or modem.

6.4 Overheating Concerns

While the VAP11AC has a smart cooling fan, some users have reported the device becoming warm during extended use. Ensure the device is placed in an area with adequate airflow and that the fan vents are not obstructed. If overheating persists, consider adjusting the fan settings in the web interface or contacting support.

6.5 Atunto ile-iṣẹ

To restore the device to its factory default settings:

1. With the device powered on, locate the Reset button (usually a small pinhole).
2. Use a paperclip or similar pointed object to press and hold the Reset button for approximately 5-10 seconds.
3. Release the button when the device's lights flash or it reboots.
4. Ẹ̀rọ náà yóò tún bẹ̀rẹ̀ pẹ̀lú àwọn ètò ìṣiṣẹ́ àdáṣe. O ní láti tún un ṣe.

7. Awọn pato

Figure 7.1: VAP11AC product specification overview.

8. Atilẹyin ọja ati Support

For warranty information and technical support, please refer to the official VONETS webojula tabi kan si alagbata rẹ. Tọju iwe-ẹri rira rẹ fun awọn ẹtọ atilẹyin ọja.

Official VONETS Webojula: www.vonets.com (Àkíyèsí: Èyí ni ìjápọ̀ ibi-àkójọpọ̀, jọ̀wọ́ ṣàyẹ̀wò ìtìlẹ́yìn gidi náà webAaye.)