1. Ifihan
This manual provides detailed instructions for the safe and effective use of your Stabila LAR 160 G Green Rotation Self-Leveling Laser Set. This professional-grade tool is designed for precise leveling tasks in both interior and exterior applications, featuring a highly visible green laser beam and robust construction.
Jọwọ ka iwe afọwọkọ yii daradara ṣaaju ṣiṣiṣẹ ẹrọ naa ki o tọju rẹ fun itọkasi ọjọ iwaju.
2. Alaye Aabo
Always observe the following safety precautions to prevent injury and damage to the device.
- Lesa Ìtọjú: This product emits Class 2 laser radiation. Do not stare directly into the laser beam. Avoid direct eye exposure.
- Ayika Ṣiṣẹ: Use the laser level only in well-ventilated areas. Keep the device away from moisture, dust, and extreme temperatures.
- Aabo Batiri: Use only recommended battery types. Ensure correct polarity when inserting batteries. Do not mix old and new batteries or different types of batteries. Dispose of batteries according to local regulations.
- Itọju: Do not attempt to modify or repair the device yourself. Refer all servicing to authorized Stabila service personnel.
- Awọn ọmọde ati Eniyan Laigba aṣẹ: Keep the device out of reach of children and unauthorized personnel.
3. Package Awọn akoonu
Daju pe gbogbo awọn nkan wa ati pe ko bajẹ lori ṣiṣi silẹ:
- Stabila LAR 160 G Green Rotation Laser
- REC 160 R/G Set Receiver
- BST-S Construction Tripod (height-adjustable from 39"–63" / 100–160 cm)
- Hi/Lo Elevation Rod (from 31.5"- 75'' / 80-190 cm)
- Magnetic High-Visibility Plastic Target Plate with Cross-Hair
- Ikarahun Lile Gbigbe Case
- Itọsọna olumulo
4. Awọn ẹya Ọja
The Stabila LAR 160 G offers a range of features for professional leveling applications:
- Fully Automatic, Motor-Driven Rotation Laser: Ensures high leveling accuracy of ± 0.1 mm/m (1/8 inch @ 100 ft).
- Fast Self-Leveling Function: Achieves level within 20 seconds.
- STABILA GREENBEAM Technology: Green laser beams are four times more visible to the human eye than red beams, improving visibility in various conditions.
- Four Laser Functions: Supports horizontal rotation, vertical rotation, plumb-line function, and square (90°) in vertical operation for versatile use.
- IP 65 Protection Class: Dustproof and waterproof, suitable for demanding job site conditions.
- Shock-Absorbent Casing: STABILA soft grip casing provides protection against impacts, with a stable housing cover protecting the laser optics.
- Iṣakoso Rọrun: Operated via three control buttons: on/off, tilt mode, and manual mode.
- Accessible Battery Drawer: Allows for easy battery replacement, even when the device is mounted on a tripod.
- Agbegbe Iṣẹ Nla: Up to 600 m (2000 ft) in diameter when used with the REC 160 R/G set receiver.
- Iṣagbesori pupọ: Two 5/8" x 11 threads integrated in the housing for vertical and horizontal applications.
5. Eto
5.1 Fifi sori batiri
- Locate the battery drawer on the side of the laser unit.
- Open the battery drawer and insert the required D-type batteries, ensuring correct polarity (+/-).
- Close the battery drawer securely.
5.2 Mounting the Laser on the Tripod
- Extend the legs of the BST-S construction tripod to a stable position.
- Place the Stabila LAR 160 G laser unit onto the tripod head, aligning the 5/8" x 11 thread.
- Securely fasten the laser unit to the tripod by turning the tripod's mounting screw.
- Adjust the tripod height as needed for your application.
5.3 Positioning the Laser
Place the tripod with the laser unit on a firm, level surface. Ensure the area is clear of obstructions that could interfere with the laser beam.
6. Awọn ilana Iṣiṣẹ
6.1 Power On/Off and Self-Leveling
- Tẹ awọn Tan/Pa a button (marked with a power symbol) to power on the device.
- The laser will automatically begin its self-leveling process. This typically takes about 20 seconds.
- Once leveled, the laser beam will rotate continuously.
- Lati pa agbara, tẹ awọn Tan/Pa a bọtini lẹẹkansi.
6.2 Laser Functions
The LAR 160 G supports four primary laser functions:
- Iyipo petele: For creating a level plane across a large area. This is the default mode after self-leveling.
- Yiyi inaro: Mount the laser vertically using the side 5/8" thread. The laser will project a vertical plane.
- Plumb-Line Function: In vertical operation, the laser can project a plumb-line (vertical point) for alignment.
- Square (90°) Function: In vertical operation, the laser can project a second beam at 90 degrees to the main vertical plane for squaring applications.
6.3 Tilt Mode
The tilt mode allows for manual slope setting. Press the Pulọọgi button (labeled 'tilt') to activate. In this mode, the laser will maintain its current angle even if the device is slightly disturbed, but it will not self-level. Use this for setting specific grades.
6.4 Ipo Afowoyi
Tẹ awọn Afowoyi button (labeled 'man') to disable self-leveling and manually adjust the laser plane. This is useful for specific non-level applications or when working with a grade rod for slope calculations.
6.5 Using the REC 160 R/G Receiver
For outdoor use or when the laser beam is not visible, use the REC 160 R/G receiver:
- Agbara lori olugba.
- Move the receiver into the path of the rotating laser beam.
- The receiver will indicate when it detects the laser beam, typically with visual and audible signals.
- Adjust the receiver's position until the center indicator is active, marking the exact level.
6.6 Using the Hi/Lo Elevation Rod
The elevation rod is used in conjunction with the receiver to measure and transfer heights:
- Attach the REC 160 R/G receiver to the elevation rod.
- Fa ọpá naa si giga ti o fẹ.
- Use the receiver to find the laser plane on the rod, then read the measurement.
7. Itọju
7.1 Ninu
Nu ẹrọ naa pẹlu asọ, damp cloth. Do not use harsh cleaning agents or solvents. Ensure the laser optics are clean and free of dust for optimal performance.
7.2 batiri Itọju
Remove batteries if the device will not be used for an extended period to prevent leakage. Replace batteries when the low battery indicator appears or performance degrades.
7.3 Ibi ipamọ
Store the laser set in its hard shell carrying case in a dry, cool place, away from direct sunlight and extreme temperatures.
7.4 Idiwọn
Regularly check the calibration of your laser level. If you suspect inaccuracies, contact an authorized Stabila service center for professional calibration.
8. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Laser does not power on. | Awọn batiri ti o ku tabi ti ko tọ fi sii. | Check battery polarity. Replace with fresh D-type batteries. |
| Laser does not self-level or flashes. | Device is outside its self-leveling range (±5°). | Reposition the laser on a more level surface. |
| Awọn kika ti ko pe. | Device out of calibration or unstable setup. | Ensure the tripod is stable. If issues persist, contact Stabila service for calibration. |
| Laser beam not visible outdoors. | Ina ibaramu imọlẹ pupọ. | Use the REC 160 R/G receiver for detection. |
9. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Stabila |
| Awoṣe | LAR 160 G |
| Nọmba apakan | 04500TR |
| Lesa Kilasi | 2 |
| Abajade | <1mW |
| Lesa wefulenti | 510 - 530 nm (Green) |
| Ara-ni ipele Range | ±5° |
| Ipele Yiye | ±0.10 mm/m (1/8 in @ 100 ft) |
| Working Area Diameter (with receiver) | 600 m (ẹsẹ 2000) |
| Igbesi aye ṣiṣe | wakati meji 20 |
| Batiri Iru | D |
| Kilasi Idaabobo | IP 65 (Dustproof and Waterproof) |
| Tripod Asopọ | 5/8" |
| Awọn iwọn Ọja (Ṣipo) | 56 x 25 x 10 inches |
| Item Weight (Laser Unit) | 5.6 iwon (nipa 160 giramu) |
10. Atilẹyin ọja ati Support
The Stabila LAR 160 G Green Rotation Self-Leveling Laser Set is covered by a 2-odun lopin atilẹyin ọja lati ọjọ ti o ra. Atilẹyin ọja yi ni wiwa awọn abawọn ninu awọn ohun elo ati iṣẹ ṣiṣe labẹ lilo deede.
For warranty claims, technical support, or service inquiries, please contact Stabila customer service or visit the official Stabila website. Please have your product model number (LAR 160 G) and part number (04500TR) available when contacting support.
Fun alaye diẹ sii, ṣabẹwo: www.stabila.com
