1. Ifihan
This manual provides essential information for the proper installation, operation, and maintenance of your Exmark 126-4860 Tire and Wheel. This genuine Exmark replacement part is designed for compatibility with Exmark Radius E-Series and S-Series lawnmowers. Please read this manual thoroughly before use to ensure safe and efficient performance.
2. Alaye Aabo
Always prioritize safety when handling and installing replacement parts. Failure to follow safety instructions can result in serious injury or property damage.
- Wọ ohun elo aabo ti ara ẹni ti o yẹ (PPE), gẹgẹbi awọn ibọwọ ati aabo oju, lakoko fifi sori ẹrọ.
- Ensure the lawnmower is turned off, the engine is cool, and the spark plug wire is disconnected before beginning any maintenance or installation.
- Use proper lifting techniques and support the equipment securely to prevent accidental movement.
- Refer to your lawnmower's original owner's manual for specific safety procedures related to wheel replacement.
- Ilana 65 Ikilọ: Ọja yii le ni awọn kẹmika ti a mọ si Ipinle California lati fa aarun ati awọn abawọn ibimọ tabi ipalara ibisi miiran.
3. Ọja Ipariview
The Exmark 126-4860 is a genuine factory replacement tire and wheel assembly. It is designed to provide reliable performance and proper fit for compatible Exmark lawnmower models.
olusin 3.1: Top view of the Exmark 126-4860 Tire and Wheel assembly.
olusin 3.2: Apa view showing the part number label on the tire and wheel.
Figure 3.3: An Exmark lawnmower, illustrating the type of equipment this wheel is designed for.
Ibamu:
- Compatible with Exmark Radius E-Series
- Compatible with Exmark Radius S-Series
4. Eto ati fifi sori
This section outlines the general steps for replacing a lawnmower wheel. Always consult your specific lawnmower's service manual for detailed, model-specific instructions.
- Prepare the Lawnmower: Park the lawnmower on a flat, stable surface. Turn off the engine, remove the ignition key, and disconnect the spark plug wire to prevent accidental starting. Allow the engine and exhaust to cool completely.
- Secure the Lawnmower: Use a jack or appropriate lifting device to raise the side of the lawnmower where the wheel needs to be replaced. Support the mower securely with jack stands or blocks to prevent it from falling.
- Remove the Old Wheel: Depending on your mower model, you may need to remove a hubcap, retaining clip, nut, or bolt securing the old wheel to the axle. Carefully slide the old wheel off the axle.
- Inspect the Axle: Clean any debris from the axle and inspect it for damage or wear. Apply a thin layer of grease to the axle if recommended by your mower's manual.
- Install the New Wheel: Slide the new Exmark 126-4860 Tire and Wheel onto the axle, ensuring it is fully seated. Reinstall any washers, nuts, clips, or hubcaps in the reverse order of removal. Tighten fasteners to the torque specifications provided in your mower's manual.
- Lower the Lawnmower: Carefully lower the lawnmower to the ground.
- Reconnect Spark Plug: Tun asopọ okun waya sipaki tan.
5. Awọn ero ṣiṣe
While the wheel itself does not have operational controls, its proper function is critical to the safe and effective operation of your lawnmower.
- Titẹ Taya: If your tire is inflatable, ensure it is inflated to the recommended pressure (typically found on the tire sidewall or in your mower's manual) before each use. Incorrect tire pressure can affect cutting quality, traction, and tire wear.
- Paapaa Wọ: Ensure all wheels are in good condition and properly inflated (if applicable) to promote even cutting and reduce strain on the mower's components.
- Ilẹ̀: Avoid operating the lawnmower on excessively rough or uneven terrain that could damage the wheels or tires.
6. Itọju
Regular maintenance of your tire and wheel assembly will extend its lifespan and ensure optimal performance of your lawnmower.
- Ayẹwo igbagbogbo: Periodically inspect the tire for cuts, cracks, bulges, or excessive wear. Check the wheel rim for bends or damage.
- Mimọ: Keep the wheel and tire free of grass clippings, mud, and other debris. Accumulated debris can unbalance the wheel or cause premature wear.
- Lubrication Axle: If your mower's manual recommends it, periodically lubricate the axle bearings or bushings to ensure smooth rotation.
- Ibi ipamọ: When storing the lawnmower for extended periods, ensure the tires are properly inflated (if applicable) and stored in a cool, dry place away from direct sunlight and harsh chemicals.
7. Laasigbotitusita
This section addresses common issues related to lawnmower wheels.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Wobbly Wheel | Loose axle nut/bolt; Worn axle bushing/bearing; Bent wheel rim | Tighten fasteners; Inspect and replace worn components; Replace wheel if bent |
| Flat Tire (if applicable) | Puncture; Leaky valve stem; Improper bead seal | Repair puncture; Replace valve stem; Re-seat tire bead or seek professional repair |
| Excessive Tire Wear | Improper tire pressure; Operating on abrasive surfaces; Misaligned axle | Adjust tire pressure; Avoid harsh terrain; Consult mower manual for alignment checks |
8. Awọn pato
Key specifications for the Exmark 126-4860 Tire and Wheel assembly.
| Iwa | Iye |
|---|---|
| Olupese | Exmark |
| Nọmba apakan | 126-4860 |
| Awoṣe | Kẹkẹ |
| Iwọn Nkan | 7.7 iwon |
| Ọja Mefa | 12 x 12 x 12 inches |
| UPC | 193308124001 |
| Ọkọ Iṣẹ Iru | Lawnmowers, Exmark Radius E-Series, Exmark Radius S-Series |
9. Atilẹyin ọja ati Support
This product is a genuine Exmark Toro Factory Part, ensuring quality and compatibility. For specific warranty information, please refer to the official Exmark website or contact Exmark customer support directly.
Purchases may be eligible for a 30-day free return, refund, or replacement policy, depending on the retailer's terms.
Figure 9.1: Exmark Original Parts logo, signifying genuine product.
For further assistance or technical support, please visit the official Exmark webaaye tabi kan si awọn ile-iṣẹ iṣẹ ti a fun ni aṣẹ.
Exmark Store Link: Exmark Official Store
