Ìwé Ìtọ́sọ́nà Olùlò Ìmọ́tótó Afẹ́fẹ́ COWAY Airmega 150

1. Ifihan

The COWAY Airmega 150 is a compact air purifier designed to enhance indoor air quality. It features a multi-stage filtration system to capture airborne particles and odors, providing cleaner air for your home environment. This manual provides essential information for the proper setup, operation, and maintenance of your Airmega 150.

2. Ọja Ipariview

The Airmega 150 is engineered for effective air purification in spaces up to 214 sq. ft. in 12.5 minutes or up to 518 sq. ft. in 30 minutes. Key features include:

• HyperCaptive Filtration System: Combines a Washable Pre-filter, a Deodorization filter, and a Green True HEPA filter to reduce 99.999% of 0.01-micron airborne particles, including pollen, allergens, smoke, dander, and odors.
• Real-Time Air Quality Indicator: A pollution sensor communicates indoor air quality in real-time via a brightly colored LED.
• Ipo Aifọwọyi: A maa n se atunṣe iyara afẹfẹ laifọwọyi da lori didara afẹfẹ ti a rii.
• 3-Stage Iyara Fan Afowoyi: Allows manual control of fan speed (low, medium, high).
• Easy-to-Remove Pre-filter: Designed for convenient cleaning.
• Cartridge Design for Filters: Simplifies filter replacement.
• Awọn titaniji àlẹmọ: Indicators notify when filters need cleaning or replacement.
• Isẹ idakẹjẹ Ultra: Noise levels range from 19 dB to 48 dB.

Figure 1: Key features of the COWAY Airmega 150.

Figure 2: HyperCaptive Filtration System components.

3. Eto

3.1 Unboxing ati Placement

Carefully remove the air purifier from its packaging. Place the unit on a flat, stable surface. Ensure there is adequate space around the air intake and outlet for optimal airflow. Avoid placing it directly against a wall or in a confined corner.

Figure 3: Airmega 150 dimensions for placement consideration.

3.2 Filter fifi sori

The Airmega 150 uses a convenient cartridge design for filter installation. The filters are typically pre-installed but may require removal of protective packaging before first use.

1. Gently pull the front cover of the air purifier to detach it.
2. Remove the pre-filter by pulling it upwards.
3. The deodorization filter and True HEPA filter are combined in a single cartridge. Remove this cartridge.
4. Remove any plastic packaging from the new filter cartridge.
5. Insert the new filter cartridge into the unit, ensuring it is seated correctly.
6. Re-insert the pre-filter.
7. Align and reattach the front cover until it clicks securely into place.

4. Awọn ilana Iṣiṣẹ

4.1 Agbara Tan / Pa

Tẹ bọtini agbara (⏻) lórí pánẹ́ẹ̀lì ìṣàkóso láti tan tàbí pa ẹ̀rọ náà.

4.2 Atọka Didara afẹfẹ (AQI)

The Airmega 150 features an LED light bar that indicates the current indoor air quality:

• Buluu: Ti o dara air didara
• Alawọ ewe: Didara afẹfẹ dede
• Yellow: Dídára afẹ́fẹ́ tí kò dára
• Pupa: Didara afẹfẹ ti ko dara pupọ

The AQI light can be turned on or off by pressing the light bulb icon (💡) lori awọn iṣakoso nronu.

Figure 4: Real-Time Air Quality Indicator and Auto Mode.

4.3 Awọn ọna ṣiṣe

Tẹ bọtini iyara afẹfẹ (∿) to cycle through the following modes:

• Ipo Aifọwọyi: The fan speed automatically adjusts based on the air quality detected by the pollution sensor.
• Manual Fan Speed (1, 2, 3): Select from three fan speeds (low, medium, high) for continuous operation.
• Ipo Eco: (Not explicitly detailed in provided data, but implied by control panel. Assumed to be an energy-saving mode.)
• Ipo orun: (Not explicitly detailed in provided data, but implied by control panel. Assumed to be a quiet, low-power mode for nighttime.)

4.4 Aago Išė

Tẹ bọtini aago (🕒) to set the unit to operate for a specific duration (e.g., 1 hour, 4 hours, 8 hours) before automatically turning off.

4.5 Ọmọ Titiipa

To activate or deactivate the Child Lock function, press and hold the light bulb icon (💡) for 3 seconds. This prevents accidental changes to settings.

5. Itọju

Regular maintenance ensures optimal performance and extends the lifespan of your Airmega 150.

5.1 Filter Alerts

The control panel features indicators that will light up when it's time to clean or replace filters:

• Àlẹmọ-tẹlẹ: Clean every 2-4 weeks (depending on usage and environment).
• Ajọ Deodorization: Rọpo ni isunmọ ni gbogbo oṣu 6.
• Ajọ HEPA otitọ: Rọpo ni isunmọ ni gbogbo oṣu 12.

After cleaning or replacing a filter, press and hold the Filter Reset button (⎘) for 3 seconds to reset the indicator.

Figure 5: Filter replacement process.

5.2 Cleaning the Washable Pre-Filter

The pre-filter captures larger particles like pet hair and dust. It should be cleaned regularly.

1. Pa a kuro ki o yọọ kuro ni afẹfẹ afẹfẹ.
2. Remove the front cover and then the pre-filter.
3. Gently vacuum the pre-filter to remove loose dust and debris. For a deeper clean, wash it with water and mild soap.
4. Ensure the pre-filter is completely dry before re-installing it.
5. Re-install the pre-filter, then the front cover.
6. Plug in and turn on the air purifier. Reset the filter alert if necessary.

Figure 6: Cleaning the washable pre-filter.

5.3 Nmọ́ Sensọ Patikulu

The particle sensor, located on the side of the unit, should be cleaned every two months to ensure accurate air quality readings.

1. Pa a kuro ki o yọọ kuro ni afẹfẹ afẹfẹ.
2. Open the sensor cover on the side of the unit.
3. Use a dry cotton swab to gently clean the lens and the air intake/outlet of the sensor.
4. Pa ideri sensọ naa.
5. Pulọọgi ki o tan ẹrọ isọdọtun afẹfẹ.

6. Awọn pato

7. Atilẹyin ọja ati Support

The COWAY Airmega 150 comes with a 3-year Limited Manufacturer's Warranty. For warranty claims, technical support, or any operational issues not covered in this manual, please contact Coway customer service.

Please refer to the official Coway website or your product registration for detailed warranty terms and contact information.