Sennheiser XSW 1-825 Dual-A Wireless Microphone System Instruction Manual

Ọrọ Iṣaaju

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Sennheiser XSW 1-825 Dual-A Channel Wireless Microphone System. This system is designed for clear audio transmission in various applications, including live vocals, presentations, and events.

The bundle includes an EM-XSW 1 dual stationary receiver, two SKM XSW transmitters with e825 capsules, two MZQ 1 microphone clips, an NT 12-5 CW power supply, four AA batteries, two tripod microphone stands with fixed booms, and two XLR-XLR cables.

Image: The Sennheiser XSW 1-825 Dual-A Wireless Microphone System, showing the receiver unit and two handheld microphones.

Awọn ẹya pataki:

• Easy-to-use handheld wireless system for reliable audio.
• One-button scanning and synchronization for simplified setup.
• Intuitive icon-based indicators for clear operation status.
• Internal diversity receiver antennas for a compact design.
• Supports simultaneous use of up to 10 systems.

Awọn ilana iṣeto

1. Yọ awọn ohun elo kuro: Carefully remove all items from the packaging. Verify that all components listed in the introduction are present.
2. Ibi olugba: Place the EM-XSW 1 dual stationary receiver on a stable surface, away from potential sources of interference (e.g., Wi-Fi routers, other wireless devices).

Image: Front panel of the EM-XSW 1 receiver, showing display and control buttons.
3. Connect Power to Receiver: Connect the NT 12-5 CW power supply to the receiver's power input and then to an electrical outlet.
4. Connect Receiver to Audio Mixer: Use the provided XLR-XLR cables to connect the balanced XLR outputs (Bal) on the rear of the receiver to the input channels of your audio mixer. Alternatively, use the unbalanced 1/4" jack outputs (Unbal).


Image: Rear panel of the EM-XSW 1 receiver, displaying balanced XLR outputs, unbalanced 1/4" jack outputs, and power input.


Image: An XLR-XLR audio cable, used for connecting the receiver to an audio mixer.
5. Install Batteries in Transmitters: Unscrew the bottom part of each SKM XSW handheld transmitter. Insert two AA batteries into each transmitter, observing the correct polarity (+/-). Screw the bottom part back on securely.


Image: Two SKM XSW handheld microphones, ready for use.

6. Assemble Microphone Stands: Assemble the two tripod microphone stands. Attach the MZQ 1 microphone clips to the stands. Secure the handheld microphones into the clips.


Image: A black tripod microphone stand with an adjustable boom arm.

7. Power On and Scan: Power on the receiver and then each handheld transmitter. Press the SCAN button on the receiver. The system will automatically search for available frequencies.
8. Muṣiṣẹpọ: Once a clear frequency is found, press the AṢỌRỌ button on the receiver. Then, hold the handheld transmitter close to the receiver's SYNC port and press the AṢỌRỌ button on the transmitter (if available, or follow on-screen prompts). The receiver and transmitter will synchronize to the same frequency. Repeat for the second microphone.

Awọn ilana Iṣiṣẹ

Titan/Apapa:

• Olugba: Press the power button on the front panel of the receiver.
• Atagba: Press and hold the power button on the handheld transmitter until the display illuminates.

Pa Iṣẹ́ Dakẹ́

Each SKM XSW transmitter features a mute switch. Slide the switch to mute or unmute the microphone. The display on the transmitter will indicate the mute status.

Iṣatunṣe Iwọn didun:

Adjust the output volume of each channel using the VOL- ati VOL+ buttons on the receiver's front panel. Fine-tune the overall audio level using your connected audio mixer.

Channel Selection and Synchronization:

If interference occurs or you need to change channels, use the ṢETO Ayẹwo button on the receiver to find a new clear frequency. After scanning, press AṢỌRỌ on the receiver and then on the transmitter to re-synchronize the devices.

Itoju

• Rirọpo Batiri: Replace AA batteries in the handheld transmitters when the low battery indicator appears on the transmitter display. Always use fresh, high-quality batteries.
• Ninu:
  • Awọn gbohungbohun: Gently wipe the microphone body with a soft, dry cloth. For the microphone grille, use a soft brush to remove dust or debris. Do not use liquid cleaners directly on the grille or capsule.
  • Olugba: Wipe the receiver's surface with a soft, slightly damp cloth. Ensure no moisture enters the unit.
• Ibi ipamọ: When not in use for extended periods, remove batteries from the transmitters to prevent leakage. Store the system in a dry, cool place, away from direct sunlight and extreme temperatures.
• Itọju USB: Avoid sharp bends or kinks in the XLR cables. Store them coiled loosely to prevent damage.

Laasigbotitusita

Awọn pato

Alaye atilẹyin ọja

The Sennheiser XSW 1-825 Dual-A Channel Wireless Microphone System comes with a 2-Odun Atilẹyin ọja Limited from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official Sennheiser webojula.

Atilẹyin

For technical assistance, product inquiries, or service requests, please contact Sennheiser customer support. You can find contact information, FAQs, and additional resources on the official Sennheiser webojula:

Sennheiser Atilẹyin Webojula

When contacting support, please have your product model number (XSW 1-825 Dual-A) and serial number (if applicable) ready.