1. Ifihan
Thank you for choosing the LUXRITE 4 Inch Ultra Thin LED Recessed Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Aworan 1.1: Pariview of the LUXRITE 4 Inch Ultra Thin LED Recessed Light and included junction box.
2. Alaye Aabo
IKILO: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Má ṣe fi sori ẹrọ ni awọn ibi ti iwọn otutu iṣiṣẹ ti kọja iwọn otutu ti a fun ni ẹrọ naa.
- Ensure all wiring is properly secured and insulated.
- Ẹrọ yii dara fun damp locations and IC (Insulation Contact) rated, meaning it can be in direct contact with insulation.
- Má ṣe yí ohun èlò tàbí àwọn èròjà rẹ̀ padà.
3. Package Awọn akoonu
Daju pe gbogbo awọn paati wa ṣaaju ki o to bẹrẹ fifi sori:
- LUXRITE 4 Inch Ultra Thin LED Recessed Light(s)
- Junction Box(es)
- Spring Loaded Clips (pre-attached to light fixture)
- Awọn eso Waya
4. Eto ati fifi sori
Tẹle awọn igbesẹ wọnyi fun fifi sori ẹrọ to dara:
- Pa Agbara: Ensure power is disconnected at the circuit breaker or fuse box before starting installation.
- Iho gige: Cut a 4-1/4 inch diameter hole in the ceiling at the desired location. Ensure there is at least 2 inches of clearance above the ceiling for the fixture and junction box.
- Open Junction Box: Open the cover of the provided junction box. Remove the appropriate knockout(s) for your electrical supply cable.
- Awọn isopọ Waya: Insert the electrical supply cable into the junction box through the knockout. Connect the wires using the provided wire nuts:
- Connect the black wire from the supply to the black wire of the junction box.
- Connect the white wire from the supply to the white wire of the junction box.
- Connect the ground wire from the supply to the green wire of the junction box.
- Close Junction Box: Securely close the junction box cover.
- So Imọlẹ Isalẹ pọ: Connect the cable from the LED downlight to the cable extending from the junction box. Ensure the connectors click securely into place.
- Insert Junction Box: Carefully push the wired junction box through the cut-out hole into the ceiling.
- Fi Imọlẹ isalẹ sii: Push the spring clips on the LED downlight upwards. Insert the downlight into the ceiling hole. Release the clips to secure the fixture flush against the ceiling.
- Pada Agbara pada: Tan agbara pada si ẹrọ fifọ tabi apoti fiusi.
Image 4.1: Step-by-step installation guide for the recessed light.
Aworan 4.2: alaye view of the light fixture and junction box, highlighting dimensions and IC rating.
5. Awọn ilana Iṣiṣẹ
5.1 Color Temperature Selection (CCT)
Your LUXRITE recessed light features a selectable color temperature switch located inside the junction box. Before closing the junction box during installation, or by carefully opening it if already installed, you can choose from three color temperatures:
- 3000K (Soft White): A warm, inviting light suitable for living rooms and bedrooms.
- 4000K (Cool White): A neutral, balanced light ideal for kitchens, offices, and task lighting.
- 5000K (funfun didan): A crisp, energetic light often used in utility areas, garages, or for maximum brightness.
Simply slide the switch to your desired color temperature setting. Once set, close the junction box.
Image 5.1: Visual representation of the three selectable color temperatures in a kitchen environment.
Aworan 5.2: Example of 3000K and 4000K color temperatures creating different ambiances in an outdoor setting.
5.2 Dimming Iṣẹ
This LED recessed light is dimmable from 100% down to 10% output. To utilize the dimming feature, ensure you are using a compatible LED dimmer switch. Refer to the specifications section for a list of compatible dimmer models.
6. Itọju
The LUXRITE LED recessed light requires minimal maintenance. To clean the fixture:
- Ensure power is turned off at the circuit breaker before cleaning.
- Allow the fixture to cool completely if it has been in operation.
- Mu imuduro rẹ nu pẹlu rirọ, gbẹ, tabi die-die damp asọ.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or electrical components.
7. Laasigbotitusita
If you experience issues with your LUXRITE LED recessed light, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan | Kò sí ìpèsè agbára; Wáyà tí kò ní ìdènà; Ohun èlò tí ó ní àbùkù | Check circuit breaker/fuse; Verify all wire connections are secure; Test fixture with known working power source. |
| Ina flickers | Incompatible dimmer switch; Loose wiring; Voltage awọn iyipada | Ensure dimmer is LED compatible (refer to Section 8); Check wiring connections; Consult an electrician for voltage oran. |
| Ina ti wa ni baìbai tabi ju imọlẹ | Incorrect CCT setting; Dimmer setting | Adjust the CCT switch inside the junction box; Adjust the dimmer switch to the desired brightness level. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | LUXRITE |
| Nọmba awoṣe | LR23734-4 |
| Iwọn | 4 Inṣi |
| Wattage | 10 Wattis |
| Imọlẹ | 700 Lumens |
| Iwọn otutu awọ | 3000K / 4000K / 5000K Yiyan |
| Dimmable | Bẹẹni (10% - 100%) |
| Voltage | 120 Volts |
| Igun tan ina | Awọn iwọn 110 |
| Igba aye | Awọn wakati 50,000 |
| Awọn iwe-ẹri | ETL Listed, IC Rated, Damp Ti won won |
| Ohun elo | Irin, Ṣiṣu |
| Ọja Mefa | 4.81 x 4.81 x 1.02 inches |
| Iru fifi sori ẹrọ | Ẹke Fula |
Image 8.1: Physical dimensions of the LUXRITE 4 Inch Ultra Thin LED Recessed Light.
8.1 Compatible Dimmer List
For optimal dimming performance, use the following compatible dimmer models:
Image 8.2: List of compatible dimmer switches for LUXRITE recessed lights.
Note: The presence of a dimmer on this chart is not a guarantee of compatibility of the bulb in any particular installation. Absence of a dimmer on this chart does not imply incompatibility. Please reference the dimmer manufacturer's instructions for installation and further information.
9. Atilẹyin ọja ati Support
This LUXRITE product is covered by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official LUXRITE website. If you require technical assistance or have questions regarding your product, please contact LUXRITE customer support.
Fun iranlọwọ siwaju sii, jọwọ ṣabẹwo si LUXRITE Store on Amazon.
