Ọrọ Iṣaaju
Thank you for choosing the Thorens TD 1601 turntable. This semi-automatic turntable is designed to provide high-end vinyl playback with ease, featuring an electric tonearm lift and lower, automatic shut-off, and one-touch speed selection. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable.
Awọn Itọsọna Aabo
- Read all instructions before operating the turntable.
- Keep the turntable away from water or moisture.
- Maṣe ṣe idiwọ awọn ṣiṣi eefin.
- Lo awọn asomọ/awọn ẹya ara ẹrọ ti a sọ pato nipasẹ olupese.
- Unplug the turntable during lightning storms or when unused for long periods.
- Tọkasi gbogbo iṣẹ si awọn oṣiṣẹ iṣẹ ti o peye.
Package Awọn akoonu
Jọwọ ṣayẹwo pe gbogbo awọn ohun kan wa ninu apoti naa:
- Thorens TD 1601 Turntable Unit
- Platter (two-piece, aluminum)
- Belii wakọ
- Ideri Eruku
- Adapter agbara
- RCA Audio Cables (if included)
- Afowoyi Olumulo (iwe-ipamọ yii)
Ọja Pariview
olusin 1: Iwaju view of the Thorens TD 1601 turntable with the dust cover raised. The black plinth houses the silver platter and the tonearm assembly. Control buttons are visible on the front left.
The Thorens TD 1601 features a classic design with modern functionalities. Key components include the main plinth, a two-piece aluminum platter, a precision tonearm (TP 92), and an integrated dust cover. The unit incorporates an electronically controlled AC motor and a spring-loaded sub-chassis for optimal sound reproduction.
Ṣeto
1. Unpacking
Fi ìṣọ́ra yọ gbogbo àwọn èròjà inú àpótí náà. Pa àpótí àtilẹ̀wá mọ́ fún ìrìnàjò tàbí ìtọ́jú lọ́jọ́ iwájú.
2. Ifiweranṣẹ
Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation around the unit.
3. Apejọ
- Fifi sori ẹrọ awo ati igbanu: Carefully place the two-piece aluminum platter onto the spindle. Locate the drive belt and stretch it around the inner rim of the platter and the motor pulley.
- Tonearm Setup: The tonearm (TP 92) is pre-mounted. Follow the specific instructions in the separate tonearm manual (if provided) for balancing and setting tracking force and anti-skate.
- Ideri Ekuru: Attach the dust cover hinges to the designated slots on the rear of the turntable.
4. Awọn isopọ
- Ijade ohun: Connect the turntable's audio outputs (RCA or XLR, if available) to the appropriate input on your amplifier, AV receiver, or phono preamplifier. Rí i dájú pé àwọn ìsopọ̀ tó tọ́ sí ọ̀nà òsì àti ọ̀tún.
- Waya ilẹ: Connect the ground wire from the turntable to the ground terminal on your amplifier tabi phono preamplifier to minimize hum.
- Agbara: Connect the power adapter to the turntable's power input and then to a suitable wall outlet.
Awọn ilana Iṣiṣẹ
1. Agbara Tan / Paa
Press the power button (usually located on the front or side) to turn the turntable on or off. An indicator light will typically confirm the power status.
2. Iyara Aṣayan
The TD 1601 features one-touch speed selection. Use the dedicated buttons (e.g., 33, 45) to select the desired playback speed for your record.
3. Ti ndun a Gba
- Place a record on the platter, ensuring it is centered.
- Select the correct playback speed (33 or 45 RPM).
- Press the "Start" or "Play" button. The electric tonearm lift will automatically lower the tonearm onto the record's lead-in groove.
- At the end of the record, the opto-electronically triggered end switch will automatically stop the platter and lift the tonearm.
4. Idaduro Sisisẹsẹhin
To stop playback manually, press the "Stop" button. The tonearm will lift and return to its rest, and the platter will stop rotating.
Itoju
1. Ninu
- Turntable Unit: Wipe the plinth and dust cover with a soft, dry, lint-free cloth. For stubborn marks, use a slightly damp cloth and dry immediately. Avoid abrasive cleaners.
- Platter: Keep the platter surface clean to prevent dust transfer to records.
2. Ìtọ́jú Stylus
Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can damage records and degrade sound quality.
3. Belt Replacement
The drive belt may need replacement after several years of use. Refer to the Thorens website or authorized service centers for genuine replacement parts and instructions.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Ko si agbara | Power cable not connected; outlet not active. | Ṣayẹwo awọn asopọ agbara; gbiyanju kan ti o yatọ iṣan. |
| Ko si ohun tabi ohun kekere | Awọn kebulu ohun ko ni asopọ daradara; amplifier input incorrect; stylus dirty or damaged. | Ensure cables are secure; select correct input on amplifier; clean or replace stylus. |
| Ariwo humming | Ground wire not connected; interference. | Connect ground wire; move turntable away from other electronic devices. |
| Platter ko nyi | Drive belt dislodged or broken. | Re-seat or replace the drive belt. |
Awọn pato
- Eto Wakọ: Belt drive, electronically controlled AC motor
- Platter: Two-piece, Aluminum, 3.2 kg
- Wow & Flutter (DIN WRMS): <= 0.05%
- Ohun orin: TP 92 (Effective length: 232.8 mm)
- Awọn iwọn (WHD): 43.9 cm x 18.0 cm x 37.1 cm (17.3 x 7.1 x 14.6 inches)
- Asopọmọra: Wired (RCA, XLR outputs)
- Awọn eroja to wa: Ideri eruku
- Ohun elo: Plastic (chassis), Wood (base - inferred from description), Metal (platter, tonearm)
- Àwọ̀: Dudu
- Awọn ẹrọ ibaramu: Amplifier, AV Receiver, Speakers
Atilẹyin ọja ati Support
Thorens products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please visit the official Thorens website or contact your authorized Thorens dealer. Please retain your proof of purchase for warranty claims.
Fun iranlọwọ siwaju sii, jọwọ ṣabẹwo: www.thorens.com
