Ìwé Ìtọ́sọ́nà Olùlò Aṣiṣẹ́ Vimar 19593 Arké Connected IoT Actuator

1. Ifihan

The Vimar 19593 Arké Connected IoT Actuator is an electronic control device designed for smart home environments. It features a NO 16 A relay output and supports dual IoT technology: Bluetooth 5.0 for the Vimar VIEW wireless mesh system and Zigbee 3.0 for broader compatibility. This actuator allows for both local control via a physical button and remote control through dedicated applications. It also includes instantaneous power measurement and energy consumption monitoring capabilities, along with an RGB LED for status indication and adjustable intensity.

This manual provides essential information for the safe installation, operation, and maintenance of your Vimar 19593 Arké Connected IoT Actuator.

2. Alaye Aabo

• Fifi sori ẹrọ itanna: Installation must be performed by qualified personnel in compliance with local electrical codes and regulations.
• Ibi ti ina elekitiriki ti nwa: Ensure the power supply (100-240 V ~ 50/60 Hz) matches the device specifications before installation.
• Ge Agbara: Always disconnect power at the main circuit breaker before performing any installation, wiring, or maintenance.
• Lilo inu ile Nikan: This device is intended for indoor use in dry environments. Do not expose to moisture or extreme temperatures.
• Yago fun apọju: Do not exceed the maximum load rating of 16 A for the relay output.
• Awọn ọmọde ati awọn ohun ọsin: Jeki ẹrọ naa ati awọn paati rẹ kuro ni arọwọto awọn ọmọde ati ohun ọsin.

3. Ọja Ipariview

The Vimar 19593 Arké Connected IoT Actuator is a compact module designed for integration into standard electrical systems. It features a physical button for local control and pairing, and an RGB LED indicator for status feedback.

Nọmba 1: Iwaju view of the Vimar 19593 Arké Connected IoT Actuator. It is a dark gray rectangular module with a small indicator light and a circular button at the bottom.

Nọmba 2: Close-up of the actuator showing a symbol for wireless connectivity and the control button.

Awọn eroja pataki:

• Bọtini Iṣakoso: Used for local ON/OFF control and initiating the pairing process.
• Atọka LED RGB: Provides visual feedback on device status, pairing mode, and can be adjusted for intensity.
• Ijade Ifiranṣẹ: Connects to the load (e.g., lights, appliances) for switching ON/OFF.
• Awọn modulu Alailowaya: Integrated Bluetooth 5.0 and Zigbee 3.0 for smart home connectivity.

4. Eto

4.1 Fifi sori ti ara

1. Ge Agbara: Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker.
2. Asopọmọra: Connect the actuator according to the provided wiring diagram (typically found on the device itself or in the packaging). Ensure correct connection of live, neutral, and load wires to the appropriate terminals. This device is designed for modular, flush-mounted, or wall-mounted installations.
3. Ẹrọ to ni aabo: Mount the actuator securely within the electrical box or housing.
4. Pada Agbara pada: Nígbà tí a bá ti parí ìfìsílẹ̀ àti gbogbo ìsopọ̀mọ́ra, dá agbára padà sí ibi tí ẹ̀rọ ìfọ́mọ́ra náà ti ń ṣiṣẹ́.

4.2 App fifi sori ati so pọ

The Vimar 19593 supports two primary wireless technologies for smart home integration: Bluetooth 5.0 (via Vimar VIEW Wireless app) and Zigbee 3.0 (via compatible Zigbee hubs and apps).

Nọmba 3: Awọn Vimar VIEW App icon, used for managing the actuator.

1. Ṣe igbasilẹ Ohun elo: Gba awọn Vimar VIEW Ailokun app from your device's app store (for Bluetooth control) or a compatible Zigbee hub app (e.g., Amazon Alexa app for Zigbee).
2. Se akanti fun ra re: Open the app and create an account if you don't already have one.
3. Bẹ̀rẹ̀ Ipò Ìsopọ̀pọ̀: Press and hold the physical control button on the actuator for approximately 5 seconds. The RGB LED will begin to pulse blue, indicating it is in pairing mode.
4. Fi Ẹrọ sinu App: Follow the on-screen instructions in your chosen app to add a new device. The app should detect the Vimar 19593 actuator.
5. Select Technology: Within the Vimar VIEW Wireless app, you can switch between Bluetooth and Zigbee modes if needed. For Zigbee, ensure your Zigbee hub is also in pairing mode.
6. Eto pipe: Assign a name to your device and configure any initial settings as prompted by the app.

5. Awọn ilana Iṣiṣẹ

5.1 Iṣakoso Agbegbe

• TAN/PA: Briefly press the physical control button on the actuator to toggle the connected load ON or OFF.

5.2 Iṣakoso latọna jijin nipasẹ App

Once paired, you can control the actuator remotely using the Vimar VIEW Wireless app (for Bluetooth) or a compatible Zigbee app.

Nọmba 4: Example of the Vimar app interface showing energy monitoring for connected devices.

• Toggle Load: Open the app, select your Vimar 19593 actuator, and use the virtual button to switch the connected load ON or OFF.
• Abojuto Agbara: The app provides real-time instantaneous power measurement and tracks consumed energy. This feature allows you to monitor the power usage of the connected appliance.
• RGB LED Adjustment: Adjust the intensity and potentially the color (if supported by the app) of the RGB LED indicator through the app settings.

5.3 Voice Iṣakoso Integration

The actuator can be integrated with voice assistants through compatible smart home hubs (e.g., Amazon Alexa for Zigbee). Refer to your voice assistant's setup guide for integration steps.

Nọmba 5: Illustration of a smart plug (similar to actuator function) being controlled via voice commands and a smartphone app.

6. Itọju

• Ninu: Disconnect power before cleaning. Use a soft, dry cloth to wipe the device. Do not use liquid cleaners or abrasive materials.
• Awọn imudojuiwọn famuwia: Periodically check the Vimar VIEW Wireless app for available firmware updates to ensure optimal performance and security. Follow the app's instructions for any update procedures.
• Awọn iṣayẹwo deede: Occasionally inspect the device for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

7. Laasigbotitusita

• Ẹrọ Ko Dahun:
  • Check if the power supply is active.
  • Ensure the device is properly wired.
  • If using a Vimar Gateway, confirm it has an active internet (CLOUD) connection, as loss of connection may prevent operation.
• Awọn oran Isopọpọ:
  • Ensure the actuator's LED is pulsing blue, indicating pairing mode.
  • Verify your smartphone or Zigbee hub is within range.
  • If re-associating, you may need to switch the device to Bluetooth mode via the Vimar Arké app, then back to Zigbee. If this fails, temporarily remove power from the actuator and restore it to attempt a reset before re-pairing.
• LED Not Functioning as Expected (Zigbee Hub):
  • When associated with a generic Zigbee hub, direct control over the LED's function and color may be limited. The LED typically reflects the actuator's ON (blue) or OFF (off) state.
• Power Consumption Readings Missing (Zigbee Hub):
  • Some Zigbee integrations (e.g., ZHA) might not fully support reading power consumption data from this device. Verify compatibility with your specific Zigbee coordinator and integration.
• Idapada si Bose wa tele: To perform a factory reset, remove power from the device for a few seconds, then restore it. This may clear all pairing information.

8. Awọn pato

9. Atilẹyin ọja

For information regarding the warranty period and terms for your Vimar 19593 Arké Connected IoT Actuator, please refer to the official Vimar website or the warranty documentation included with your purchase. Warranty policies may vary by region and retailer.

10. Atilẹyin

For additional instructions, tutorials, and technical support, please visit the official Vimar support webojula:

faidate.vimar.com

You can also contact Vimar customer service directly for assistance with product inquiries, troubleshooting, or warranty claims.