KAIWEETS HT200B AC Clamp Afowoyi olumulo Mita

1. Ifihan

Thank you for choosing the KAIWEETS HT200B AC Clamp Meter. This device is a compact, auto-ranging digital clamp mita ti a ṣe apẹrẹ fun wiwọn agbara AC, vol AC/DCtage, capacitance, continuity, resistance, and diode. It is suitable for various electrical testing applications in residential, commercial, and industrial settings. Please read this manual thoroughly before use to ensure safe and proper operation.

Nọmba 1: KAIWEETS HT200B AC Clamp Meter. This image displays the overall design of the clamp meter, showing the red clamp jaw, black body, rotary dial, function buttons, and digital display.

2. Alaye Aabo

ÌKÌLỌ̀: Láti yẹra fún ìkọlù iná mànàmáná tàbí ìpalára ara ẹni, jọ̀wọ́ ka gbogbo ìtọ́ni ààbò kí o sì tẹ̀lé wọn dáadáa.

• Nigbagbogbo faramọ awọn koodu aabo agbegbe ati ti orilẹ-ede.
• Má ṣe lo mita náà bí ó bá hàn pé ó ti bàjẹ́ tàbí tí àwọn èdìdì ìdánwò náà bá ti bàjẹ́.
• Maṣe lo diẹ sii ju iwọn voltage, bi a ti samisi lori mita, laarin awọn ebute tabi laarin eyikeyi ebute oko ati ilẹ aiye.
• Ṣọra pupọ nigbati o ba n ṣiṣẹ pẹlu voltages loke 60V DC tabi 30V AC RMS. Iru voltages duro a mọnamọna ewu.
• Jeki awọn ika ọwọ lẹhin awọn oluso ika lori awọn itọsọna idanwo lakoko lilo.
• Do not measure AC current on uninsulated conductors.
• The KAIWEETS HT200B is rated CAT III 600V. Ensure the measurement category is appropriate for your application.
• This device measures AC current only. It does not measure DC current.
• Rọpo awọn batiri nigbati ifihan batiri kekere ba han lati rii daju pe o peye awọn kika.

3. Ọja Ipariview

The KAIWEETS HT200B features a robust design for reliable performance. Key components include:

• Clamp Ẹrẹ: A lo fun wiwọn agbara AC ti ko ni ifọwọkan.
• Ipe ipe Rotari: Yan awọn iṣẹ wiwọn.
• Ifihan LCD: Ó ń fi àwọn ìkà àti àwọn àmì hàn.
• Awọn bọtini iṣẹ: For specific features like HOLD, MAX, and backlight.
• Awọn Jacks ti nwọle: Fun sisopọ awọn itọsọna idanwo fun voltage, resistance, capacitance, continuity, and diode measurements.

Nọmba 2: Clamp Jaw Design. This image highlights the clamp jaw of the HT200B, showing its opening mechanism and a measurement of 26mm, indicating its capacity for clampni ayika conductors.

4. Eto

4.1. Fifi sori batiri

1. Rí i dájú pé mita náà ti pa.
2. Wa ideri ibi ipamọ batiri naa ni ẹhin mita naa.
3. Lo screwdriver lati ṣii yara batiri naa.
4. Insert two (2) AAA batteries, observing correct polarity (+ and -).
5. Rọpo ideri kompaktimenti batiri ki o ni aabo pẹlu dabaru.

5. Awọn ilana Iṣiṣẹ

5.1. AC Lọwọlọwọ wiwọn

The HT200B can measure AC current up to 200A. It features auto-ranging for convenience.

1. Turn the rotary dial to the '2A', '20A', or '200A' AC current range. The meter will automatically select the appropriate range within the chosen setting.
2. Ṣii clamp ẹnu nípa títẹ ohun tí ń fa ìfàsẹ́yìn náà.
3. Enclose only one conductor (live or neutral) within the clamp jaw. Do not clamp around multiple conductors or an entire cable, as this will result in an inaccurate reading of zero.
4. Ka iye agbara AC lori ifihan LCD.
5. If the current exceeds 3A, the display backlight will turn orange as a warning.

Important: This meter measures AC current only. It cannot measure DC current.

Nọmba 3: Measuring AC Current with HT200B. This image shows the HT200B clamp meter actively measuring AC current by clamping around a single conductor, displaying a reading of 9.47A.

5.2. AC / DC Voltage Idiwon

Lati wiwọn AC tabi DC voltage:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the 'V~' for AC voltage or 'V=' for DC voltage eto.
3. So awọn itọsọna idanwo ni afiwe si Circuit tabi paati ti o fẹ lati wiwọn.
4. Ka voltage iye lori ifihan LCD.
5. Ti o ba ti voltage exceeds 80V, the display backlight will turn orange as a warning.

Nọmba 4: Wiwọn AC Voltage with HT200B. This image illustrates the HT200B measuring AC voltage using its test leads, showing a reading of 389V.

5.3. Iwọn Iwọn agbara

Lati wiwọn agbara:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the capacitance symbol (typically '†').
3. Rii daju pe kapasito ti gba silẹ ni kikun ṣaaju asopọ awọn itọsọna idanwo.
4. So awọn itọsọna idanwo kọja awọn ebute kapasito.
5. Ka iye agbara lori ifihan LCD.

Nọmba 5: Capacitance Measurement with HT200B. This image shows the HT200B measuring the capacitance of a component, displaying a reading of 10.02 uF.

5.4. Igbeyewo Ilọsiwaju

Láti ṣe ìdánwò ìtẹ̀síwájú:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the continuity symbol (typically a speaker icon).
3. So awọn itọsọna idanwo kọja Circuit tabi paati.
4. If the resistance is below a certain threshold (usually around 50 ohms), the meter will emit an audible beep, indicating continuity.

5.5. Resistance Wiwọn

Lati wiwọn resistance:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the resistance symbol (Ω).
3. Ensure the circuit or component is de-energized before measurement.
4. So awọn itọsọna idanwo kọja paati naa.
5. Ka iye resistance lori ifihan LCD.

5.6. Diode igbeyewo

Lati ṣe idanwo diode kan:

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary dial to the diode symbol (→|←).
3. So asiwaju idanwo pupa mọ anode ati asiwaju idanwo dudu mọ katode ti diode naa. A forward vol.tagÓ yẹ kí a fi ìṣàn e (fún àpẹẹrẹ, 0.5V sí 0.8V fún àwọn diode silicon) hàn.
4. Reverse the test leads. The display should show 'OL' (Open Loop), indicating no conduction.

5.7. Awọn iṣẹ Pataki

• MU: Tẹ bọtini 'DÍDÁ' láti dì kíkà tó wà lórí ìbòjú náà. Tẹ̀ lẹ́ẹ̀kan síi láti tú u sílẹ̀.
• O pọju: Press the 'MAX' button to capture and display the maximum measured value. Press again to exit.
• Imọlẹ ẹhin: Press the backlight button (often combined with another function) to illuminate the display for better visibility in low-light conditions.
• Agbara Aifọwọyi Paa: Mita naa yoo pa laifọwọyi lẹhin igba diẹ ti ko ṣiṣẹ lati fipamọ igbesi aye batiri.
• Orange Display Warning: The display backlight will turn orange if AC current exceeds 3A or voltage exceeds 80V, indicating a potentially high-energy situation.

6. Itọju

6.1. Ninu

Pa mita naa pẹlu ipolowoamp asọ ati ìwọnba detergent. Maṣe lo awọn abrasives tabi awọn nkan ti o nfo. Rii daju pe mita naa ti gbẹ patapata ṣaaju lilo.

6.2. Batiri Rirọpo

Tí àmì bá hàn lórí ìbòjú, yí àwọn bátìrì padà gẹ́gẹ́ bí a ṣe ṣàlàyé rẹ̀ ní Apá 4.1. Yọ àwọn bátìrì kúrò tí a kò bá lo mítà náà fún ìgbà pípẹ́.

7. Laasigbotitusita

• Ko si Ifihan: Ṣàyẹ̀wò fífi bátìrì sílẹ̀ kí o sì rí i dájú pé àwọn bátìrì náà kò tán.
• Awọn kika ti ko pe: Ensure correct function selection, proper test lead connection, and that the circuit is de-energized for resistance/capacitance measurements. For current, ensure only one conductor is within the clamp.
• 'OL' lórí Ìfihàn: Indicates an over-range condition or an open circuit.
• Mita ko tan: Check batteries. If issues persist, contact customer support.

8. Awọn pato

Nọmba 6: KAIWEETS HT200B Size Comparison. This image shows the HT200B next to another clamp meter, illustrating its compact dimensions of 6.4*2.4*1.2 inches (163*60*30mm).

9. Atilẹyin ọja ati Support

KAIWEETS products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official KAIWEETS webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira fun awọn iṣeduro atilẹyin ọja.