1. Ifihan
Thank you for choosing Linkind A19 Dimmable LED Light Bulbs. These bulbs are designed to provide efficient, high-quality lighting with dimming capabilities, suitable for various indoor applications. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs.
Image 1.1: Linkind A19 Dimmable LED Light Bulbs (6-pack).
2. Awọn ẹya Ọja
- Ti o le ṣe dimmable: Smooth dimming from 10% to 100% with compatible LED dimmers.
- Iwọn awọ: 5000K Daylight for a bright, natural light appearance.
- Agbara Lilo: 5 Watts (40W incandescent equivalent), providing 480 Lumens.
- Igbesi aye gigun: Rated for 15,000 hours, offering extended use.
- Atọka Rendering Awọ Giga (CRI): CRI80+ ensures vivid and accurate color representation.
- Lẹsẹkẹsẹ Tan: Provides full brightness immediately with no warm-up time.
- Isẹ idakẹjẹ: Designed for no buzzing, humming, or flickering.
- Ipilẹ Ipilẹ: E26 medium screw base for easy installation in most fixtures.
- Awọn iwe-ẹri: UL Listed and FCC Certified for safety and quality assurance.
Image 2.1: Key features and dimensions of the Linkind A19 LED bulb.
Image 2.2: Energy saving comparison between Linkind LED and incandescent bulbs.
Image 2.3: Illustration of flicker-free and buzz-free operation for eye comfort.
3. Alaye Aabo
Please read and understand all safety instructions before installing or using these LED bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Lilo inu ile Nikan: A ṣe àwọn góòlù wọ̀nyí fún lílo nínú ilé. Má ṣe lò wọ́n nínú àwọn ohun èlò ìta gbangba àyàfi tí a bá ṣe pàtó fún lílo níta gbangba.
- Voltage: Operate only on 120V, 60Hz circuits.
- Ibamu Dimmer: Ensure your dimmer switch is compatible with LED bulbs. Incompatible dimmers may cause flickering or damage to the bulb.
- Awọn imuduro ti a fi sinu: Suitable for use in totally enclosed luminaires.
- Fifi sori: Máa pa agbára mọ́ ohun èlò náà kí o tó fi bulbulu náà sí i tàbí kí o tó yọ ọ́ kúrò.
- Ko si Mercury: These bulbs do not contain mercury.
- Alatako Shatter: Designed to be shatter resistant.
- Maṣe Tu: Do not attempt to disassemble or modify the bulb.
4. fifi sori
Installing your Linkind A19 LED bulbs is a simple process. Follow these steps:
- Pa Agbara: Before replacing any bulb, ensure the power to the light fixture is turned off at the switch and, if necessary, at the circuit breaker.
- Yọ Bulb atijọ kuro: Fara yọ boolubu ti o wa tẹlẹ kuro ni imuduro. Gba laaye lati tutu ti o ba ti wa laipẹ ni lilo.
- Fi Bọlubu Tuntun sori ẹrọ: Screw the Linkind A19 LED bulb into the E26 medium screw base socket until it is finger-tight. Do not overtighten.
- Pada Agbara pada: Tan-an agbara pada ni iyipada ati fifọ Circuit.
- Idanwo: Turn on the light to ensure the bulb is functioning correctly.
Important Note on Dimmers: These bulbs are dimmable. For optimal performance and to avoid flickering or damage, use with LED-compatible dimmer switches. Not compatible with 3-way touch lamps.
Image 4.1: Dimmable functionality and compatibility with wall dimmers (not 3-way touch lamps).
5. Isẹ
Once installed, your Linkind A19 LED bulbs are ready for use. They offer instant illumination and smooth dimming capabilities.
- Titan/Pa: Use your standard light switch to turn the bulbs on or off.
- Dimming: If connected to a compatible dimmer switch, adjust the dimmer control to achieve your desired brightness level, ranging from 10% to 100%.
- Imọlẹ Lẹsẹkẹsẹ: The bulbs will reach full brightness immediately upon being switched on, without any delay.
Image 5.1: Smooth dimming operation of the Linkind A19 LED bulb.
6. Itọju
Linkind A19 LED bulbs require minimal maintenance due to their long lifespan and durable design.
- Ninu: Rii daju pe agbara wa ni pipa ṣaaju ṣiṣe mimọ. Mu ese boolubu naa pẹlu asọ ti o gbẹ. Ma ṣe lo awọn olutọpa omi tabi awọn ohun elo abrasive.
- Rọpo: These bulbs have an estimated lifespan of 15,000 hours. Replace the bulb when it reaches the end of its operational life.
- Idasonu: Sọ awọn gilobu atijọ kuro ni ibamu si awọn ilana agbegbe fun egbin itanna.
7. Laasigbotitusita
If you encounter issues with your Linkind A19 LED bulbs, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Boolubu ko ni tan imọlẹ. | No power to the fixture; Bulb not screwed in properly; Bulb has reached end of life. | Check power supply and switch; Ensure bulb is securely screwed in; Replace bulb if necessary. |
| Boolubu flickers tabi buzzes. | Incompatible dimmer switch; Loose connection. | Ensure dimmer is LED-compatible; Check bulb connection. |
| Gílóòbù kì í tàn yòò dáadáa. | Incompatible dimmer switch; Dimmer range not set correctly. | Use an LED-compatible dimmer; Some dimmers have adjustment settings for minimum brightness. |
8. Awọn pato
| Sipesifikesonu | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Linkind |
| Nọmba awoṣe | Dimmable A19 |
| Imọlẹ Iru | LED |
| Boolubu Apẹrẹ Iwon | A19 |
| Bulb Base | E26 |
| Wattage (Looto) | 5 Wattis |
| Okan Daradara | 40 Wattis |
| Imọlẹ | 480 Lumens |
| Iwọn otutu awọ | 5000 Kelvin (Imọlẹ oju-ọjọ) |
| Atọka Rendering Awọ (CRI) | 80+ |
| Igun tan ina | Awọn iwọn 230 |
| Voltage | 120 Volts |
| Apapọ Life | Awọn wakati 15,000 |
| Dimmable | Bẹẹni (10% - 100%) |
| Awọn iwe-ẹri | UL Listed, FCC Certified |
| inu ile / ita gbangba Lilo | Ninu ile |
| Ohun elo | Ṣiṣu |
| Ọja Mefa | 2.17"W x 4.13"H |
9. Atilẹyin ọja ati Support
Linkind is committed to providing high-quality products and customer satisfaction.
- Atilẹyin ọja: These Linkind A19 LED Light Bulbs come with a 2-odun atilẹyin ọja lati ọjọ ti o ra. Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
- Iṣẹ onibara: For technical support, warranty inquiries, or any other questions, please contact Linkind Customer Service.
Ibi iwifunni:
Foonu: 1-877-770-5727
Operating Hours: Monday - Friday, 9 AM - 5 PM PST
