Ọrọ Iṣaaju
This manual provides essential information for the safe and efficient operation of your EMAX ESP10V080V3PK 10 HP 80 Gallon Oil-Lube Stationary Air Compressor with 115V 7.2 Amp Refrigerated Corded Air Dryer Bundle. This industrial-grade system is designed for commercial and industrial applications, offering high performance and durability. Proper installation, operation, and maintenance are crucial for maximizing the lifespan and efficiency of your equipment.
Figure 1: The EMAX ESP10V080V3PK 10 HP 80 Gallon Oil-Lube Stationary Air Compressor with its accompanying Refrigerated Air Dryer.
Alaye Aabo
Always observe the following safety precautions to prevent injury and equipment damage. This equipment operates under high pressure and with high voltage itanna.
- Ka iwe afọwọkọ naa: Before operating, read and understand all instructions and warnings in this manual.
- Aabo Itanna: Ensure the compressor and dryer are connected to a properly grounded electrical supply matching the specified voltage (115V or 460V, 3-Phase). Disconnect power before performing any maintenance or service.
- Aabo Titẹ: Never exceed the maximum operating pressure of the compressor or any attached tools/hoses. Always wear appropriate eye protection when operating.
- Afẹfẹ: Operate the compressor in a well-ventilated area to prevent heat buildup and ensure proper air intake.
- Itọju: Perform all maintenance as scheduled. Do not attempt repairs beyond your capability. Consult qualified personnel for complex issues.
- Awọn ẹya gbigbe: Keep hands, hair, and clothing clear of moving parts, such as the belt and fan.
- Ilana 65 Ikilọ: Ọja yii le fi ọ han si awọn kemikali ti a mọ si Ipinle California lati fa akàn ati awọn abawọn ibimọ tabi ipalara ibisi miiran.
Eto ati fifi sori
1. Unpacking ati ayewo
Carefully remove the compressor and dryer from their packaging. Inspect both units for any shipping damage. Report any damage to your supplier immediately.
2. Ifiweranṣẹ
Place the compressor and dryer on a firm, level surface capable of supporting their combined weight (approximately 1073 pounds). Ensure adequate clearance around the units for ventilation and maintenance access. Avoid placing in direct sunlight or near heat sources.
3. Asopọ Itanna
The EMAX ESP10V080V3PK requires a 3-phase electrical supply, configurable for either 115 Volts or 460 Volts. Consult a qualified electrician for proper wiring and connection to ensure compliance with local electrical codes and safety standards. The system includes industrial TEFC electric motors and magnetic starters.
Olusin 2: Example of an electrical connection component (Hubbell box) on the compressor.
4. Awọn iṣayẹwo akọkọ
- Ipele Epo: Verify the oil level in the compressor pump. The pump is pressure lubricated. Refer to the sight glass or dipstick for correct levels.
- Ẹdọfu igbanu: Check the tension of the drive belt. The unit features a belt tensioner for easy adjustment. Ensure the belt is properly aligned and tensioned according to manufacturer specifications.
Figure 3: The belt tensioner mechanism, designed for easy adjustment.
5. Connecting the Air Dryer
Connect the refrigerated air dryer to the compressor's air outlet. Ensure all connections are secure and leak-free. The dryer is designed to remove moisture, oil, and dirt from the compressed air, improving air quality and protecting downstream equipment. Note that hydraulic hoses or connection lines are not included in this bundle.
Isẹ
1. Starting the Compressor
After ensuring all connections are secure and initial checks are complete, turn on the main power switch for the compressor. The compressor will begin to build pressure in the 80-gallon ASME tank (rated for 200 PSI). The unit delivers 38 CFM at 100 PSI, with a top PSI of 175.
2. Titẹ titẹ
Adjust the pressure regulator to the desired output pressure for your application. Always ensure the set pressure does not exceed the maximum rating of your air tools or accessories.
3. Continuous Run Function
The EMAX compressor features a continuous run option. To activate this, locate and engage the continuous run valve. This function allows the compressor to run continuously, maintaining a consistent air supply for demanding applications.
Figure 4: The continuous run valve, allowing for uninterrupted operation.
4. Air Dryer Operation
The 58 CFM refrigerated air dryer operates automatically to remove moisture. Monitor the filter change indicator on the dryer's control panel. A change in the indicator's color or position signals that the coalescing filters require attention or replacement.
Figure 5: Air dryer control panel with filter change indicator.
Itoju
Regular maintenance is essential for the longevity and optimal performance of your EMAX air compressor and dryer bundle. Always disconnect power before performing any maintenance.
1. Daily/Weekly Checks
- Omi Imugbẹ: The compressor features an automatic tank drain. Verify its proper operation to ensure condensate is regularly removed from the air tank.
- Ipele Epo: Check the compressor pump oil level. Add oil if necessary, using only recommended compressor oil.
- Asẹ afẹfẹ: Inspect the compressor's air intake filter. Clean or replace if dirty to ensure proper airflow and prevent contamination.
2. Monthly/Quarterly Checks
- Belt Tension and Condition: Inspect the drive belt for wear, cracks, or fraying. Adjust tension using the belt tensioner if needed.
- Air Dryer Filters: Replace the coalescing filters in the refrigerated air dryer as indicated by the filter change indicator or according to the dryer's maintenance schedule.
- Isọsọ gbogboogbo: Keep the compressor and dryer clean and free of dust and debris to ensure proper cooling and operation.
Figure 6: Internal components of the refrigerated air dryer, including filters.
Nọmba 7: Alaye view of the air dryer's internal filtration and cooling system.
Laasigbotitusita
This section provides solutions to common operational issues. For problems not listed or if solutions do not resolve the issue, contact EMAX customer support.
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Compressor ko bẹrẹ | No power supply; tripped circuit breaker; faulty motor. | Check power connection and circuit breaker. Consult an electrician if motor is suspected faulty. |
| Ìjáde titẹ afẹfẹ kekere | Air leaks; clogged air filter; worn piston rings. | Check all air connections for leaks. Clean or replace air filter. Contact service for internal component issues. |
| Ariwo pupọ tabi gbigbọn | Loose components; worn bearings; improper belt tension. | Inspect and tighten all fasteners. Check belt tension and condition. Consult service for internal component wear. |
| Air dryer not removing moisture | Clogged filters; refrigerant issue; improper ambient temperature. | Check and replace coalescing filters. Ensure proper ventilation around dryer. Contact service for refrigerant issues. |
Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | EMAX |
| Orukọ awoṣe | ESP10V080V3PK |
| Agbara Agbara Agbara | 10 HP |
| Konpireso Agbara | 80 galonu |
| Air Flow Capacity (Dryer) | 58 CFM |
| Compressor Air Delivery | 38 CFM @ 100 PSI |
| Ipa ti o pọju | 175 PSI |
| Voltage | 115 Volts, 460 Volts (3-Phase) |
| Orisun agbara | Agbara itanna |
| Ariwo Ipele | 35 dB (Whisper 100 silent air system) |
| Iwọn Nkan | 1073 iwon |
| Tank Rating | ASME 200PSI |
| Awọn irinše to wa | Ajọ |
| Pataki Awọn ẹya ara ẹrọ | Patented pressure lubricated pump, Continuous run option, Belt tensioner, Automatic tank drain, Industrial grade TEFC motor, Refrigerated Air Dryer with coalescing filters. |
| Niyanju Lilo | Powering Pneumatic Tools, Spraying, Air Brushing, Industrial Processes |
| UPC | 815002014333 |
Alaye atilẹyin ọja
EMAX provides a 1-odun atilẹyin ọja on material and workmanship for the ESP10V080V3PK Air Compressor and Dryer Bundle. For detailed warranty terms and conditions, please refer to the documentation included with your product or contact EMAX customer support.
Onibara Support
For technical assistance, parts, or service inquiries regarding your EMAX ESP10V080V3PK Air Compressor and Dryer Bundle, please contact EMAX customer support. Have your model number (ESP10V080V3PK) and purchase information ready when contacting support.
You can visit the official EMAX webaaye fun awọn alaye olubasọrọ ati awọn orisun afikun. Visit the EMAX Store on Amazon fun alaye siwaju sii.
