1. Ifihan
The EPEVER MT50 Remote Meter is designed for monitoring and setting parameters of compatible EPEVER solar charge controllers. It provides real-time operational data, working status, and alarm information through its large LCD screen, enhancing user control and system management.
2. Alaye Aabo
Please read this manual carefully before installation and operation. Keep it in a safe place for future reference. Improper installation or use may result in damage to the device or connected equipment.
- Ensure all power connections are disconnected before installing or removing the MT50 meter.
- Connect the MT50 only to compatible EPEVER solar charge controllers as specified.
- Yago fun ṣiṣafihan ẹrọ naa si awọn iwọn otutu to gaju, oorun taara, tabi ọrinrin.
- Do not attempt to disassemble or repair the MT50 meter yourself. Contact qualified personnel for service.
3. Package Awọn akoonu
Daju pe gbogbo awọn ohun kan wa ninu package rẹ:
- EPEVER MT50 Mita jijin
- Communication Cable (RJ45)
- Mounting Screws and Caps
- Ilana itọnisọna
4. Ọja Ipariview
The MT50 remote meter features a large LCD display and intuitive navigation buttons for easy interaction with your EPEVER solar charge controller.
4.1. Key Awọn ẹya ara ẹrọ
- Ibamu: Designed for EPEVER LS-B(P), VS-BN, Tracer-BN, Tracer-A(N), eTracer, and iTracer series controllers.
- Abojuto gidi-akoko: Displays operational data and working status in digital, graphic, and textual forms.
- Idanimọ aifọwọyi: Automatically identifies the connected controller model and relevant parameter data.
- Išẹ itaniji: Provides real-time failure information and alarms.
- Ni wiwo olumulo-ore: Six navigation function keys for direct and rapid operation.
- Ibi ti ina elekitiriki ti nwa: Powered directly via the communication cable from the controller, no external power needed.
- Aṣayan Iru Batiri: Supports Gel, Sealed, Flooded, and User-defined (programmable) battery types.
- Awọn ọna Iṣakoso fifuye: Offers Manual, Light On/Off, Light On+Timer, and Time Control load modes.
4.2. Front and Back View
5. Eto ati fifi sori
Follow these steps to properly install and connect your EPEVER MT50 Remote Meter to a compatible solar charge controller.
5.1. Mounting the MT50
- Choose a suitable location for the MT50 meter, ensuring it is easily accessible and visible.
- Use the provided mounting screws to secure the meter to a flat surface.
- Ensure the communication cable can reach the solar charge controller without excessive tension.
5.2. Connecting to the Solar Charge Controller
The MT50 connects to the solar charge controller via an RJ45 communication cable. This cable supplies power to the MT50 and facilitates data exchange.
- Locate the RS485 communication port on your EPEVER solar charge controller.
- Connect one end of the RJ45 communication cable to the MT50's RS485 port.
- Connect the other end of the RJ45 communication cable to the RS485 port on your solar charge controller.
- Once connected, the MT50 display should power on and show real-time data from the controller.
6. Awọn ilana Iṣiṣẹ
The MT50 provides various screens for monitoring and parameter settings. Use the navigation buttons (Esc, Up, Down, Left, Right, OK) to navigate through the menus and adjust settings.
6.1. Abojuto Data
The main display shows real-time data such as solar panel voltage/current, battery voltage/current, and load voltage/current. Use the navigation buttons to scroll through different monitoring screens.
6.2. Eto Parameters
To enter the setting interface, press and hold the "OK" button for 1 second. You can then navigate through various parameters such as battery type, battery capacity, voltage control parameters, and load control modes.
- Aṣayan Iru Batiri: Choose between Gel, Sealed, Flooded, or User-defined. For User-defined, you can set specific voltage paramita.
- Awọn ọna Iṣakoso fifuye: Select from Manual, Light On/Off, Light On+Timer, or Time Control to manage your load output.
7. Itọju
The EPEVER MT50 Remote Meter requires minimal maintenance. Regular checks can ensure optimal performance and longevity.
- Keep the display screen clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Periodically check the communication cable for any signs of damage or loose connections.
- Ensure the meter is securely mounted and not exposed to excessive vibrations.
8. Laasigbotitusita
If you encounter issues with your MT50 Remote Meter, refer to the following common problems and solutions:
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| MT50 display is blank | No power from controller, faulty cable, or incompatible controller. | Check controller power. Verify cable connection. Ensure controller is compatible. |
| Dátà tí kò tọ́ hàn | Incorrect parameter settings on MT50 or controller. | Review and adjust parameters in the "Control Para." menu. |
| Alarm indicator active | Àṣìṣe ètò (fún àpẹẹrẹ, over-voltage, low battery). | Check the "Failure Info." menu for details and address the underlying issue with the solar system. |
| Awọn bọtini ko dahun | Àṣìṣe ìgbà díẹ̀ tàbí ìbàjẹ́ ara. | Disconnect and reconnect the MT50. If issue persists, contact support. |
9. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Awoṣe | MT50 |
| Ifihan Iru | LCD |
| Awọn iwọn (Apapọ) | 5.24 x 5.16 x 3.15 inches |
| Iwọn Nkan | 12.3 iwon |
| Àwọ̀ | Grẹy |
| Awọn batiri ti a beere | No (powered by controller) |
| Ibaraẹnisọrọ Interface | RS485 (RJ45) |
| Awọn oludari ibaramu | EPEVER LS-B(P), VS-BN, Tracer-BN, Tracer-A(N), eTracer, iTracer Series |
10. Atilẹyin ọja ati Support
For warranty information and technical support, please refer to the documentation provided with your EPEVER solar charge controller or visit the official EPEVER webojula. Tọju iwe-ẹri rira rẹ bi ẹri rira.
