Ọrọ Iṣaaju
This manual provides essential information for the proper setup, operation, and maintenance of your Corally COR54011 TOROX 185A Brushless 2-6SS Speed Controller. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
The Corally TOROX 185A ESC is designed for high-performance RC applications, offering robust power delivery and advanced programmability for various motor and battery configurations.
Ọja Pariview
Image: The Corally COR54011 TOROX 185A Brushless Speed Controller, showcasing its red housing, integrated cooling fan, and robust gold-plated motor and battery connectors. The unit features a Team Corally logo on the side.
The TOROX 185A ESC is a powerful electronic speed controller featuring a durable red casing, an integrated cooling fan for thermal management, and multiple connection points for motor and battery. It supports both sensored and sensorless brushless motors (in sensorless mode) and is designed for 1/8th scale RC vehicles.
Awọn iṣọra Aabo
- Always disconnect the battery from the ESC when not in use.
- Ensure proper polarity when connecting batteries to avoid damage.
- Operate in a well-ventilated area to prevent overheating.
- Keep away from water unless specifically designed for waterproof operation (this model has water protection).
- Do not attempt to disassemble or modify the ESC.
- Use appropriate motor and battery combinations as specified to prevent overload.
Eto ati fifi sori
1. Mounting the ESC
Securely mount the ESC in your vehicle using double-sided tape or screws, ensuring good airflow around the unit for effective cooling. Avoid mounting near heat sources or in enclosed spaces.
2. Motor Asopọ
Connect the three motor wires from your brushless motor to the corresponding gold-plated terminals (A, B, C) on the ESC. Ensure a secure connection. For sensored motors, connect the sensor wire to the sensor port on the ESC and motor.
3. batiri Asopọ
Connect your battery pack to the XT90 connector on the ESC. This ESC supports 2-6S LiPo or 9-18 Cell NiMH batteries. Always double-check polarity before connecting.
4. Asopọ olugba
Plug the ESC's receiver cable into the throttle channel (usually Channel 2) of your RC receiver. The BEC (Battery Eliminator Circuit) provides power to the receiver and servos.
5. Iṣatunṣe
Before first use, calibrate the ESC with your radio transmitter. Refer to your transmitter's manual for specific calibration steps. Generally, this involves turning on the transmitter, holding full throttle, turning on the ESC, waiting for beeps, moving to full brake, waiting for beeps, and then returning to neutral.
Awọn ilana Iṣiṣẹ
Titan / Pipa agbara
- To power on: Ensure the transmitter is on, then connect the battery to the ESC.
- To power off: Disconnect the battery from the ESC.
Siseto awọn ESC
The TOROX 185A ESC is programmable. An optional Hobbywing LED programming card can be used for easier parameter adjustment. Key programmable parameters include:
- Ipò Iyọ̀: Forward/Reverse (with programmable reverse lockout)
- Fa Brake: 0-16% adjustment
- Ipo Batiri: NiMH/LiPo selection
- LiPo Cut-off Voltage: Programmable to protect LiPo batteries from over-discharge.
- Thermal Protection Temperature: Ṣeto ni 105°C tabi 125°C.
- BEC Voltage: 6V tabi 7.4V.
Refer to the specific programming card manual for detailed instructions on how to change these settings.
Itoju
- Ninu: Regularly clean the ESC and cooling fan to remove dirt and debris. Use a soft brush or compressed air.
- Awọn ayewo: Periodically inspect all wires and connectors for signs of wear, damage, or loose connections.
- Ibi ipamọ: Store the ESC in a dry, cool place away from direct sunlight and extreme temperatures.
- Idaabobo Omi: While this ESC features water protection, it is not designed for prolonged submersion. Always dry the unit thoroughly after exposure to moisture.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| ESC does not power on. | Battery not connected, low battery voltage, faulty connection. | Check battery connection, charge battery, inspect wires. |
| Motor ko fesi. | Incorrect calibration, motor wires loose, receiver not connected. | Recalibrate ESC, check motor and receiver connections. |
| ESC overheats. | Poor ventilation, motor/gear ratio too high, incorrect timing. | Improve airflow, adjust gear ratio, check motor timing. |
| Isẹ alaibamu. | Radio interference, loose connections, damaged sensor wire. | Check radio system, secure all connections, inspect sensor wire. |
Awọn pato
| Paramita | Iye |
|---|---|
| Awoṣe | COR54011 (C-54011) |
| O pọju. Ilọsiwaju lọwọlọwọ | 185 A |
| Max. Burst Current | 950 A |
| Iṣagbewọle Voltage (LiPo) | 2-6S (11.1-22.2 V) |
| Iṣagbewọle Voltage (NiMH) | 9-18 Cell |
| Motor Limit (4S LiPo) | 3000 Kv (5892 size motor) |
| Motor Limit (6S LiPo) | 2400 Kv (5892 size motor) |
| BEC Voltage | 6V / 7.4V (Programmable) |
| BEC lọwọlọwọ | 0-25 A |
| Eto siseto | Yes (via optional Hobbywing LED card) |
| Gbona Idaabobo | 105°C / 125°C (Programmable) |
| Omi Idaabobo | Bẹẹni |
| Itutu Fan | 30x30x10 mm |
| Motor Asopọ | 6.5 mm female |
| Batiri Asopọmọra | XT90 asopo |
| Batiri Waya Iwon | 10 AWG |
| Iṣeduro Lilo | 1/8th scale RC vehicles |
| Iwọn | Isunmọ. 250 g (0.55 lbs) |
Atilẹyin ọja ati Support
For warranty information and technical support, please contact Corally customer service or visit their official webojula. Jeki ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.
Akiyesi: Awọn ofin atilẹyin ọja le yatọ nipasẹ agbegbe ati alagbata.
