Mounting Dream MD2285-XL 40-Inch Long Arm Full Motion TV Wall Mount Instruction Manual

1. Ifihan

This manual provides comprehensive instructions for the safe and efficient installation and operation of your Mounting Dream MD2285-XL 40-Inch Long Arm Full Motion TV Wall Mount. This mount is designed to securely hold most 42-90 inch televisions with VESA patterns ranging from 200x100mm to 800x400mm and a maximum weight capacity of 150 lbs. It is compatible with 16-inch, 18-inch, and 24-inch wood stud spacing.

Please read all instructions carefully before beginning installation. If you have any questions, refer to the troubleshooting section or contact customer support.

2. Alaye Aabo pataki

• Agbara iwuwo: Maṣe kọja agbara iwuwo ti o pọju ti 150 lbs (68 kg). Tilọ kọja opin yii le ja si ipalara nla tabi ibajẹ ohun-ini.
• Iwon TV: This mount is designed for 42-90 inch TVs. Ensure your TV falls within this range.
• Ibamu VESA: Verify your TV's VESA mounting pattern (distance between mounting holes on the back of the TV) is between 200x100mm and 800x400mm.
• Odi Iru: This mount is intended for installation on wood studs (16", 18", 24" spacing), solid concrete, or brick walls. MAA ṢE fi sii sinu ogiri gbigbẹ nikan.
• Fifi sori Ọjọgbọn: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional.
• Ṣayẹwo Ẹka: Before installation, ensure all parts are present and undamaged. Do not use damaged parts.
• Iṣakoso USB: Secure all cables to prevent accidental disconnections or damage when adjusting the TV.

3. Package Awọn akoonu

Jọwọ rii daju pe gbogbo awọn paati wa ninu package rẹ:

Image: The Mounting Dream MD2285-XL TV wall mount, including the wall plate, TV brackets, articulating arms, and a bubble level. This image displays all the main components of the product.

• Wall Apejọ
• Awọn biraketi TV (2x)
• Articulating Arm Assembly
• Ohun elo Ohun elo Iṣagbesori (orisirisi awọn skru, awọn ifọṣọ, awọn alafo)
• Ipele Bubble
• Cable Ties (for cable management)
• Iṣagbesori Àdàkọ

4. Àwọn irinṣẹ́ tí a nílò (kò sí nínú rẹ̀)

• Oluwari Stud (fun fifi sori okunrinlada igi)
• Lu
• Drill Bits (appropriate for pilot holes and lag bolts)
• Ẹya iho Socket
• Phillips Head screwdriver
• Ikọwe
• Teepu Idiwọn
• Hammer (fun awọn ìdákọró nja)

5. Eto ati fifi sori

Follow these steps carefully to ensure a secure installation. It is recommended to have at least two people for TV mounting.

5.1. Pre-Fifi sọwedowo

• Jẹrisi Ibamu TV:
  Ensure your TV is between 42-90 inches and weighs no more than 150 lbs. Check the VESA mounting pattern on the back of your TV. It should be between 200x100mm and 800x400mm.
  

  Image: Graphic illustrating TV size compatibility (42-90 inches) and maximum weight capacity (150 lbs).
  

  Image: Diagram showing how to measure horizontal and vertical VESA mounting holes on the back of a TV.

• Check Cable Outlets: Ensure the mount will not block any cable outlets on your TV.
  

  Image: Illustration of checking TV cable outlets to ensure they are not obstructed by the mount.

• Ṣe idanimọ Iru Odi: Determine if your wall is made of wood studs, solid concrete, or brick. Do not install on drywall alone.
  

  Image: Visual guide showing compatible wall types: Concrete Wall, Wood Wall (16", 18", 24" studs), and Brick Wall. A warning against drywall-only installation is present.

5.2. Fifi sori Igbesẹ

1. Attach Brackets to TV Back: Secure the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit.
   

   Image: A three-panel image showing the installation steps: 1) Attach brackets to TV back, 2) Install the wall plate, 3) Hang the TV onto the wall plate.

2. Samisi Iṣagbesori Iho: Use the provided mounting template and a pencil to mark the desired location for the wall plate on your wall. Ensure it is level using the bubble level.
   

   Image: A person marking mounting holes on a wall using a template and pencil, indicating stud spacing options.
3. Awọn Iho Pilot Lilu: Drill pilot holes at the marked locations. For wood studs, use a drill bit slightly smaller than the lag bolts. For concrete/brick, use a masonry drill bit and insert anchors (if provided or purchased separately).
4. So Awo Odi naa: Secure the wall plate assembly to the wall using the lag bolts (and anchors for concrete/brick). Use a socket wrench to tighten securely.
   

   Image: A person using a wrench to secure the wall plate to the wall, showing the attachment points.

5. So TV naa pọ: Carefully lift the TV (with brackets attached) and hook it onto the wall plate. Ensure it is properly seated.
6. Secure TV to Wall Plate: Use the provided clips or screws to lock the TV brackets to the wall plate, preventing accidental dislodgement.
   

   Aworan: Isunmọ view of the TV mount mechanism, highlighting features like simple cable storage, ±3° leveling screws, adjust & lock tilting angle with handle, and clips to lock the TV in place.

6. Awọn ilana Iṣiṣẹ

The MD2285-XL mount offers versatile adjustments for optimal viewing.

6.1. Extension and Retraction

Gently pull the TV away from the wall to extend the arm up to 40 inches. Push the TV back towards the wall to retract it to a minimum distance of 3 inches. This feature is ideal for corner placement or adjusting viewijinna.

Image: A TV mounted on the wall, with the arm extended 40 inches from the wall and retracted to 3 inches, demonstrating the long extension design.

Image: A TV mounted in a corner, demonstrating the flexibility of the long arm for optimal corner placement.

6.2. Àtúnṣe Yíyípo

The TV can swivel up to 90 degrees left or right, depending on TV size, allowing you to adjust the viewing angle from various positions in the room.

Image: A TV swiveling up to 90 degrees left and right, illustrating the wide viewing angle flexibility.

6.3. Atunṣe Tẹ

Adjust the TV tilt from +5° (upward) to -12° (downward) to reduce glare and achieve a comfortable viewing angle. Use the tilting adjustment handle to set and lock the desired angle.

Image: A TV tilted backward by 5 degrees and forward by 12 degrees, demonstrating the tilt range for glare reduction.

6.4. Post-Installation Leveling

If the TV is slightly unlevel after installation, you can adjust it by ±3° using the leveling screws on the TV plate.

Image: A TV being adjusted by ±3 degrees for post-installation leveling, ensuring a perfectly horizontal display.

7. Awọn fidio ọja osise

8. Itọju

• Ayẹwo igbagbogbo: Lorekore ṣayẹwo gbogbo awọn skru ati awọn asopọ lati rii daju pe wọn ṣinṣin ati aabo.
• Ninu: Fi aṣọ rírọrùn tó gbẹ nu ibi tí wọ́n gbé e sí. Yẹra fún lílo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ.
• Lubrication: Ti awọn apa sisọ ba di lile, iye kekere ti lubricant orisun silikoni le ṣee lo si awọn aaye pivot.

9. Laasigbotitusita

• TV kii ṣe ipele: Use the post-installation leveling screws to adjust the TV by ±3°.
• Oke rilara alaimuṣinṣin: Re-check all wall plate and TV bracket screws to ensure they are securely tightened.
• Difficulty moving the arm: Apply a small amount of silicone lubricant to the pivot points of the articulating arm. Ensure no cables are obstructing movement.
• TV not fitting: Double-check your TV's VESA pattern, size, and weight against the specifications in this manual.

10. Awọn pato

11. Atilẹyin ọja ati Onibara Support

Mounting Dream products are backed by a 10-year warranty, ensuring quality and durability. For any questions regarding product installation, operation, or general inquiries, our world-class customer service team is available 7 days a week to assist you.

Please visit the official Mounting Dream webaaye tabi kan si ẹgbẹ atilẹyin wa fun iranlọwọ.