1. Ọja Ipariview
The Baseus 42LED Wireless Under Cabinet Lighting is a versatile and energy-efficient lighting solution designed for various indoor and outdoor applications. It features 42 energy-saving LEDs, offering 100 lumens of brightness with a color rendering index (CRI) greater than 80 Ra. This light is dimmable, has touch control, and allows for adjustable color temperature and brightness settings. Its rechargeable battery and magnetic installation provide convenience and flexibility.
Olusin 1: Pariview of the Baseus Wireless Magnetic Rechargeable Under Cabinet Lighting, highlighting its adjustable angle, magnetic attachment, touch control, and rechargeable nature.
2. Package Awọn akoonu
Jọwọ rii daju pe gbogbo awọn paati wa ninu package:
- 1 x Baseus 42LED Wireless Under Cabinet Lighting Unit
- 1 x mimọ ilẹ
- 1 x Okun Ngba agbara USB-C
- 1 x 3M Magnetic Strip Base
- 1 x Itọsọna olumulo (iwe yii)
3. Eto ati fifi sori
The Baseus Under Cabinet Light offers flexible installation options due to its magnetic design.
3.1 Ngba agbara si Ẹrọ
Before first use, fully charge the light. The built-in 1800mAh battery takes approximately 3-4 hours to fully charge via the USB-C port. A full charge provides about 3 hours of high brightness or up to 24 hours in low brightness mode.
Figure 2: The light unit being charged via its USB-C port, with indicators for approximate battery life at low, medium, and high brightness settings.
3.2 iṣagbesori Aw
- Direct Magnetic Adsorption: If the desired surface is made of iron or a magnetic material, the light can be directly adsorbed onto it. This allows for easy removal for charging or repositioning.
- Adhesive Magnetic Strip: For non-magnetic surfaces, use the included 3M magnetic strip base.
- Mọ dada fifi sori ẹrọ ti o fẹ daradara lati rii daju pe ko ni eruku ati girisi.
- Peel off the protective film from one side of the 3M adhesive on the magnetic strip base.
- Firmly press the magnetic strip base onto the cleaned surface and hold for 30 seconds to ensure strong adhesion.
- Once the magnetic base is securely attached, the light unit can be magnetically affixed to it. The light can be easily removed from this base for charging or relocation.
Figure 3: Illustration of the magnetic attachment mechanism, showing how the light unit clicks into place on its magnetic base.
4. Awọn ilana Iṣiṣẹ
The light features intuitive touch controls for easy operation.
4.1 Agbara Tan / Pa
- Lati tan ina ON or PAA, gently touch the power icon on the light's control panel.
4.2 Atunṣe Imọlẹ
- The light supports step-less dimming. To adjust brightness, press and hold the '+' or '-' icons on the control panel. The brightness will gradually increase or decrease. Release when the desired brightness is reached.
4.3 Awọ otutu tolesese
- The light offers three color temperature settings:
- 3000K (Funfun Gbona): Apẹrẹ fun ṣiṣẹda oju-aye ti o tutu ati ti o wuyi.
- 4000K (Mix Light): A balanced light suitable for general tasks.
- 5000K (Cool White): Bright and clear light, good for task-oriented areas.
- To cycle through these color temperatures, briefly touch the color temperature icon (sun/lightbulb symbol) on the control panel. The light also features a color memory function, retaining the last used color temperature setting.
Figure 4: Visual representation of the three available color temperature modes and the stepless brightness adjustment feature.
4.4 Atunse igun
- The light unit can be adjusted by 80 degrees on its magnetic base, allowing you to direct the light precisely where needed.
Olusin 5: Examples of the light's application in different environments, demonstrating its versatility.
5. Itọju
- Ninu: Use a soft, dry cloth to clean the surface of the light. Avoid using abrasive cleaners or solvents.
- Itọju Batiri: To prolong battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes. Store the light in a cool, dry place if not used for extended periods.
6. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | Batiri ti dinku. | Charge the light using the provided USB-C cable. |
| Imọlẹ jẹ baibai tabi flickers. | Batiri kekere. | Gba agbara si ina. |
| Awọn iṣakoso ifọwọkan ko ni idahun. | Surface is dirty or wet; temporary software glitch. | Ensure the control panel is clean and dry. Try turning the light off and on again. |
| Light falls from mounting surface. | Magnetic base not securely attached or surface is unsuitable. | Ensure the 3M adhesive is applied to a clean, dry, and smooth surface. For direct magnetic adsorption, ensure the surface is sufficiently magnetic. |
7. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | Baseus |
| Nọmba awoṣe | L3-JP-U |
| Imọlẹ Orisun Orisun | LED |
| Nọmba Awọn orisun Imọlẹ | 42 |
| Imọlẹ | 100 Lumen |
| Iwọn otutu awọ | A le ṣatunṣe (3000K, 4000K, 5000K) |
| Atọka Rendering Awọ (CRI) | > 80 Ra |
| Orisun agbara | Agbara Batiri (USB-C ti o gba agbara) |
| Agbara Batiri | 1800mAh litiumu polima |
| Akoko gbigba agbara | 3-4 wakati |
| Igbesi aye Batiri (Isunmọ.) | 3 hrs (high brightness), 24 hrs (low brightness) |
| Ọna Iṣakoso | Iṣakoso ọwọ |
| Atunse igun | 80° |
| Iṣagbesori Iru | Oofa |
| Wattage | 5 watt |
| Ọja Mefa | 11.18"D x 1.53"W x 1.88"H |
| Iwọn Nkan | 2.29 iwon (65 Giramu) |
| Ohun elo | Acrylonitrile Butadiene Styrene, Plastic, Polycarbonate |
| inu ile / ita gbangba Lilo | Ninu ile, ita gbangba |
| Apejọ ti a beere | Bẹẹni |
8. Atilẹyin ọja ati Support
Baseus provides a Lifetime Warranty for this product. For any product quality issues or support inquiries, please contact Baseus customer service via email. A free replacement will be offered after confirmation of the issue.
For further assistance, please refer to the official Baseus webojula tabi kan si wọn atilẹyin alabara egbe.
