Ọrọ Iṣaaju
Thank you for choosing the ASD LED 32 Inch Oval Flush Mount Light Fixture. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.
Alaye Aabo
IKILO: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
This fixture is designed for use in dry and damp locations. Do not install in wet locations. Ensure all connections are secure and properly insulated. Do not exceed the specified voltage ibiti o ti 100-277V.
Ọja Awọn ẹya ara ẹrọ
- Bright & Powerful: Equipped with energy-efficient 45W LEDs, delivering 3750 lumens of illumination.
- Tunable Light (3CCT): Offers three selectable color temperatures (3000K warm white, 4000K cool white, 5000K daylight) to customize your lighting ambiance.
- Dimming Dan: Features flicker-free Triac dimming, allowing brightness adjustment from 10% to 100% with compatible dimmer switches.
- Olona-Voltage isẹ: Operates efficiently within a 100-277V range, ensuring stable performance.
- Igbesi aye gigun: Engineered for longevity with an average life of 50,000 hours, providing dependable lighting for over 50 years under normal use.
- Didara ti a fọwọsi: ETL and Energy Star certified, complying with stringent safety and energy standards.
- Apẹrẹ ti o tọ: Constructed with a durable alloy steel housing, frosted acrylic shade, and solid metal base, resistant to rust and impacts.
Figure 1: Key Features of the ASD LED Light Fixture.
Figure 2: 3CCT Color Temperature Options.
Awọn ilana fifi sori ẹrọ
Awọn irinṣẹ ti a beere: Screwdriver, Wire Strippers, Drill (if anchors are needed).
Pataki: Before starting installation, ensure the power supply to the fixture location is turned off at the circuit breaker or fuse box.
- Ṣetan Iduro: Unscrew the cap nuts counter-clockwise and carefully remove the metal ring and the lens from the fixture.
- So Awo Igbesoke: Attach the mounting plate to the outlet box using two screws. If necessary, use the mounting plate as a template to mark the location for wall anchors. Drill appropriate sized holes for anchors, insert anchors, and then secure the self-tapping screws into the anchors.
- Asopọmọra Waya: Connect the electrical wires: Black to Black (Live), White to White (Neutral), and Ground to Ground (Bare Copper or Green). Secure connections with wire nuts. Carefully tuck all wires back into the outlet box.
- Secure Fixture & Select CCT: Feed the self-tapping screws through the keyhole slots on the fixture's back plate and tighten them to secure the fixture to the mounting plate. Before fully securing, locate the CCT switch on the fixture and choose your desired color temperature (3000K, 4000K, or 5000K). Once the CCT is selected, secure the lens and metal ring to the fixture pan using the cap nuts.
Àwòrán 3: Àwọn Ìgbésẹ̀ Ìfisílé.
For a full cut sheet and detailed installation guide, please refer to the official PDF manual: ASD LED Flush Mount Manual (PDF)
Awọn ilana Iṣiṣẹ
Once installed and powered, the light fixture can be operated using a standard wall switch. If a compatible Triac dimmer switch is installed, you can adjust the brightness from 10% to 100% by manipulating the dimmer control. The color temperature is set via a switch on the fixture itself during installation and cannot be changed without accessing the fixture.
Itoju
The ASD LED Flush Mount Light Fixture requires minimal maintenance. To clean the fixture, ensure the power is off and allow it to cool. Wipe the exterior surfaces with a soft, dry or slightly damp Aṣọ. Má ṣe lo àwọn ohun ìfọṣọ tàbí àwọn ohun èlò ìfọṣọ, nítorí pé wọ́n lè ba àwọn ohun èlò ìparí tàbí àwọn ohun èlò iná mànàmáná jẹ́.
Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| Imọlẹ ko tan. | Ko si agbara si ohun elo. Ti firanṣẹ ti ko tọ. Yipada aṣiṣe. | Ṣayẹwo Circuit fifọ / fiusi. Ṣe àyẹ̀wò àwọn ìsopọ̀ onírin. Idanwo tabi ropo yipada. |
| Ina flickers tabi dims lairotẹlẹ. | Iyipada dimmer ti ko ni ibamu. Loose onirin asopọ. Voltage awọn iyipada. | Rii daju pe dimmer ni ibamu pẹlu Triac. Ṣayẹwo ati aabo gbogbo awọn onirin. Verify stable power supply (100-277V). |
| Ijade ina jẹ kekere/giga. | Dimmer eto. Incorrect CCT selection. | Adjust dimmer to desired level. Re-check CCT switch setting on fixture (requires re-accessing fixture). |
Awọn pato
| Iwa | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Brand | ASD |
| Orukọ awoṣe | LED Double Oruka Flushmount |
| Nọmba Awoṣe Nkan | A-LFMOV-M32D45C-N-2p |
| Àwọ̀ | Brushed Nickel (2pk) |
| Ohun elo | Durable Alloy Steel Housing, Frosted Acrylic Shade, Matte White Diffuser Cover, Solid Metal Base |
| Ọja Mefa | 32.44"L x 18.13"W x 4.81"H |
| Imọlẹ Orisun Orisun | LED |
| Wattage | 45 watt |
| Imọlẹ | 3750 Lumen |
| Awọ Imọlẹ | 3000K/4000K/5000K (CCT Adjustable) |
| Voltage | 100-277 Awọn folti |
| Dimmable | Yes (Triac Dimming) |
| Apapọ Life | Awọn wakati 50,000 |
| Ijẹrisi | ETL, Energy Star, cETL |
| inu ile / ita gbangba Lilo | inu ile (Damp Àwọn Ibi Tí A Ti Ṣe Ìdíwọ̀n) |
| Iwọn Nkan | 7.8 iwon |
| Awọn irinše to wa | Light Fixture, Mounting Plate, Screws, Anchors, Wire Nuts |
Figure 4: Product Specification Diagram.
Atilẹyin ọja ati Support
This ASD LED Flush Mount Light Fixture is covered by a 5-odun olupese ká atilẹyin ọja. This warranty ensures quality, safety, and a positive user experience. For any questions, technical assistance, or warranty claims, please contact ASD customer support. Contact information can typically be found on the product packaging or the official ASD Lighting webojula.
Figure 5: Warranty and Certifications.
Ohun elo Ọja Examples
Figure 6: Versatile Applications of the Light Fixture.
