1. Ifihan
The INKBIRDPLUS INK-IFT01 is a non-contact infrared thermometer designed for accurate surface temperature measurements across a wide range of applications. It features a 12:1 distance-to-spot ratio, adjustable emissivity, and a clear backlit LCD display for convenient use. This manual provides essential information for the safe and effective operation of your device.
Figure 1: INKBIRDPLUS INK-IFT01 Infrared Thermometer
2. Alaye Aabo
Please read all safety warnings carefully before using the device.
- This infrared thermometer is intended for measuring surface temperatures only. It is not designed for use on humans or animals, and readings obtained from such applications will be inaccurate.
- Do not attempt to measure the internal temperature of any object with this device.
- Never irradiate human eyes directly or indirectly with the laser beam at any time. Direct exposure can cause eye damage.
- Pa ẹrọ kuro lati awọn ọmọde.
- Do not use the device in environments with explosive gases, vapor, or dust.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight for prolonged periods.
3. Ọja Ipariview
Familiarize yourself with the main components of your INKBIRDPLUS INK-IFT01 thermometer:
Figure 2: Labeled components of the INKBIRDPLUS INK-IFT01
- Ihò lésà: Ó ń tú lésà tí a fojú sí jáde.
- Sensọ infurarẹẹdi: Ó ń ṣe àwárí ìtànṣán infrared fún ìwọ̀n otutu.
- Iboju LCD: Displays temperature readings, battery status, and other indicators.
- ℃/℉/Down Button: Used to switch between Celsius and Fahrenheit, and for navigating menus.
- Function Button (MODE): Accesses settings and modes.
- Laser/Up Button: Toggles the laser on/off and for navigating menus.
- Nfa: Activates the measurement.
- Abala Batiri: Batiri 9V ni o wa ninu ile naa.
4. Eto
4.1 Fifi sori batiri
The INKBIRDPLUS INK-IFT01 requires one 9V 6F22 battery for operation. A new battery can provide approximately 12 months of continuous use.
- Wa ideri ibi ipamọ batiri naa lori ọwọ ti iwọn otutu naa.
- Gently pull the cover downwards to open the compartment.
- Insert a 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Pa ideri iyẹwu batiri titi ti o fi tẹ ni aabo sinu aaye.
Figure 3: Battery installation process
5. Isẹ
5.1 Gbigba Idiwon
- Point the thermometer at the target surface.
- Press and hold the trigger to activate the laser and begin live temperature readings. The laser dot indicates the center of the measurement area.
- Release the trigger to hold the current temperature reading on the display. The reading will remain on the screen for a short period before the device automatically powers off to save energy.
Figure 4: Trigger usage for live and locked readings
5.2 Ijinna si Ipin Aami (D:S)
The INK-IFT01 has a Distance to Spot Ratio of 12:1. This means that at a distance of 12 units from the target, the measurement spot diameter will be 1 unit. For exampNíbẹ̀, tí o bá jìnnà sí ibi tí a fẹ́ rà á, agbègbè ìwọ̀n náà yóò jẹ́ 1 ínṣì ní ìwọ̀n ìlà. Láti rí i dájú pé àwọn ìkà tó péye, rí i dájú pé agbègbè tí a fẹ́ rà náà tóbi ju ìwọ̀n ibi tí a fẹ́ rà á lọ.
Figure 5: Understanding Distance to Spot Ratio
5.3 Switching Temperature Units (℃/℉)
To switch between Celsius (℃) and Fahrenheit (℉), press the dedicated ℃/℉/Down Button located below the LCD screen. The display will update to show the selected unit.
5.4 Ìtújáde Tí A Lè Ṣàtúnṣe
Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. The INK-IFT01 allows you to adjust the emissivity from 0.1 to 1.0 to improve measurement accuracy for various surfaces. To adjust emissivity, press the MODE button to enter the emissivity setting, then use the Up ati Isalẹ awọn bọtini lati yi iye.
Refer to the following table for common emissivity values:
| Ohun elo | Emissivity |
|---|---|
| Aluminiomu (oxidized) | Ọdun 0.20 - Ọdun 0.40 |
| Brass (oxidized) | 0.61 |
| Iron (oxidized) | Ọdun 0.78 - Ọdun 0.82 |
| Ejò (oxidized) | 0.78 |
| Kun (matte) | Ọdun 0.92 - Ọdun 0.96 |
| Omi | Ọdun 0.93 - Ọdun 0.96 |
| Igi | Ọdun 0.90 - Ọdun 0.95 |
| Nja | 0.94 |
Note: This is a partial list. For a comprehensive emissivity table, please refer to the full product manual.
5.5 Àwọn Ohun Èlò Púpọ̀
The INKBIRDPLUS INK-IFT01 is suitable for various non-contact temperature measurement tasks, including:
- Cooking and BBQ (surface temperature of grills, ovens, food)
- Automotive diagnostics (engine components, tires)
- Industrial maintenance (electrical panels, machinery)
- Home inspections (HVAC, insulation, refrigerators)
Olusin 6: Examples of thermometer applications
6. Itọju
6.1 Ninu
- Lati nu ẹrọ naa, lo asọ, damp asọ. Ma ṣe lo abrasive ose tabi epo.
- For the lens, use a soft cloth or cotton swab with a small amount of rubbing alcohol. Allow the lens to dry completely before use.
- Ensure no liquid enters the device casing.
6.2 Ibi ipamọ
- Tí o kò bá lò ó, tọ́jú ìwọ̀n thermometer náà sí ibi gbígbẹ àti tútù, kúrò níbi tí oòrùn kò ti lè ràn tàbí ibi tí ó gbóná jù.
- If storing for an extended period, remove the battery to prevent leakage and damage to the device.
7. Laasigbotitusita
| Isoro | Owun to le Fa | Ojutu |
|---|---|---|
| No display/Device not turning on | Batiri kekere tabi ti o ti ku; Fifi batiri ti ko tọ sori ẹrọ | Replace the 9V battery; Ensure battery is inserted with correct polarity. |
| Awọn kika ti ko pe | Incorrect emissivity setting; Distance to spot ratio too large; Lens is dirty; Device not calibrated (unlikely for user) | Adjust emissivity for the target material; Move closer to the target; Clean the lens; Contact customer support if issues persist. |
| Cannot switch between ℃/℉ | Incorrect button press; Software glitch | Ensure you are pressing the dedicated ℃/℉/Down Button. If the issue persists, try removing and reinserting the battery. |
| Lesa ko ṣiṣẹ | Laser is turned off; Malfunction | Tẹ awọn Laser/Up Button to toggle the laser. If it still doesn't work, contact customer support. |
8. Awọn pato
| Ẹya ara ẹrọ | Ẹ̀kúnrẹ́rẹ́ |
|---|---|
| Orukọ awoṣe | INK-IFT01 |
| Iwọn Iwọn | -58℉~1022℉ / -50℃~550℃ |
| Yiye | ±2% or ±2℃ (whichever is greater) |
| Ijinna si Ipin Aami (D:S) | 12:1 |
| Emissivity | Atunṣe lati 0.1 si 1.0 |
| Akoko Idahun | Awọn aaya 0.5 |
| Ifihan Iru | Afẹyinti LCD |
| Orisun agbara | 9V 6F22 Battery (approx. 12 months life) |
| Awọn iwọn otutu ti nṣiṣẹ | 0 si 50 ℃ (32 ~ 122℉) |
| Ibi ipamọ otutu | -20 si 50℃ (-4 ~ 122℉) |
| Iwọn Nkan | 190 g |
| Awọn iwọn (isunmọ.) | 14 cm (ipari) |
| Awọn irinše to wa | INKBIRD Infrared Thermometer Gun INK-IFT01 |
9. Atilẹyin ọja & Atilẹyin
9.1 atilẹyin ọja Alaye
INKBIRDPLUS products are manufactured to high-quality standards and are warranted against manufacturing defects. Please refer to the warranty card included with your product or visit the official INKBIRD webAaye fun alaye atilẹyin ọja ofin ati ipo.
9.2 Onibara Support
If you encounter any issues or have questions regarding your INKBIRDPLUS INK-IFT01 Infrared Thermometer, please contact our customer support team. Contact details can typically be found on the INKBIRD official webaaye tabi lori apoti ọja.
Fun awọn orisun ori ayelujara, ṣabẹwo: www.inkbird.com
