Ìwé Ìtọ́sọ́nà Olùlò fún Ibùdó Ojúọjọ́ Aláìlókùn BRESSER Beaufort 5-in-1

1. Ọja Ipariview

The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.

2. Eto

2.1 Unpacking ati Ṣayẹwo paati

Ṣọra gbogbo awọn paati ki o rii daju pe awọn nkan wọnyi wa:

• Akọkọ Ifihan Unit
• 5-in-1 Outdoor Multi-Sensor Unit
• Mounting accessories (pole, base, screws)
• Power adapter for main unit
• Ilana itọnisọna

2.2 Fifi sori batiri

Ẹ̀yà Ìfihàn Pàtàkì: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.

Outdoor Multi-Sensor Unit: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.

2.3 Outdoor Sensor Placement and Mounting

Proper placement of the outdoor sensor is crucial for accurate readings.

• Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
• Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
• Orient the wind vane (the arrow) to point North during installation.
• Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

Aworan: Apa view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.

2.4 Amuṣiṣẹpọ akọkọ

After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.

2.5 Aago ati Ọjọ Eto

The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.

3. Ṣiṣẹ Ibusọ Oju-ọjọ

3.1 Ifihan Loriview

The main display unit presents various weather parameters:

• Jade: Ita gbangba otutu ati ọriniinitutu.
• NI: Iwọn otutu inu ile ati ọriniinitutu.
• ASEJE: Current wind speed and direction, including gust speed.
• Àsọtẹlẹ: Weather forecast icons (sunny, cloudy, rainy, etc.).
• BARO: Awọn kika titẹ Barometric.
• RAINFALL: Daily, weekly, or monthly rainfall accumulation.
• Akoko/DATE: Àkókò lọ́wọ́lọ́wọ́, ọjọ́, àti ọjọ́ ọ̀sẹ̀.
• BEAUFORT: Beaufort scale indicator for wind force.
• Efuufu afẹfẹ: Calculated wind chill temperature.

Aworan: Iwaju view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.

3.2 bọtini Awọn iṣẹ

The display unit features several buttons for navigation and settings:

• ITAN: View historical data for various parameters.
• O pọju/MIN: Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
• Imọlẹ: Adjust backlight brightness or activate temporary backlight.
• Ipo/Ṣeto: Enter settings mode or confirm selections.
• Awọn itọka oke/isalẹ: Navigate through menus or adjust values.

3.3 Eto Awọn itaniji

You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.

3.4 Aṣayan Ẹyọ

To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.

4. Itọju

4.1 Batiri Rirọpo

Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.

4.2 Ninu

Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.

4.3 Itọju Gbogbogbo

Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.

5. Laasigbotitusita

• No Display on Main Unit: Check power adapter connection and backup battery.
• Ko si Data Ita gbangba: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
• Awọn kika ti ko pe: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
• Àkókò/Ọjọ́ Àìtọ́: If RCC synchronization fails, manually set the time and date.

6. Awọn pato

7. Atilẹyin ọja ati Support

For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.