Einhell GC-CG 18/1 Li Cordless Grass and Shrub Shears User Manual

1. Ifihan

Thank you for choosing the Einhell GC-CG 18/1 Li Cordless Grass and Shrub Shears. This versatile tool is designed for precise trimming of grass edges and shaping of small shrubs, offering cordless freedom and ease of use. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read these instructions carefully before first use and keep them for future reference.

2. Gbogbogbo Abo ilana

Always observe the following safety precautions when operating the device:

• Ka iwe afọwọkọ naa: Mọ ara rẹ pẹlu gbogbo awọn itọnisọna ati awọn ikilọ ṣaaju ṣiṣe.
• Ohun elo Idaabobo Ti ara ẹni: Always wear appropriate eye protection, gloves, and sturdy footwear.
• Agbegbe Iṣẹ: Keep the work area clean and well-lit. Remove all obstacles and ensure no bystanders, especially children or pets, are nearby.
• Aabo Batiri: Use only recommended battery packs and chargers. Do not expose batteries to heat or fire.
• Yago fun Bibẹrẹ airotẹlẹ: Ensure the switch is in the off-position before inserting the battery pack, picking up, or carrying the appliance.
• Ṣetọju Awọn Abẹ: Keep cutting blades sharp and clean for best performance and to reduce the risk of injury.
• Ṣayẹwo Ṣaaju Lilo: Check the device for damage or loose parts before each use. Do not operate if damaged.
• Ibi ipamọ: Store the device in a dry, secure place, out of reach of children, when not in use.

3. Ọja Ipariview

The Einhell GC-CG 18/1 Li is a powerful and ergonomic tool designed for efficient garden maintenance. Key features include:

• Part of the Power X-Change battery system, allowing battery interchangeability with other Einhell tools.
• Equipped with durable metal gearing for extended service life.
• Laser-cut and diamond-sharpened blades ensure precise and clean cuts for both grass and shrubs.
• Features a soft grip handle for comfortable and secure handling during operation.
• Designed for easy trimming of grass around edges and corners.

Nọmba 1: Einhell GC-CG 18/1 Li Cordless Grass and Shrub Shears. The image displays the red and black tool with its grass cutting blade attachment and an outline indicating where the Power X-Change battery pack (not included) is inserted at the rear handle.

4. Eto

4.1. Fifi sori batiri

1. Rii daju pe ẹrọ ti wa ni pipa.
2. Insert a charged Einhell Power X-Change 18V battery pack into the battery receptacle at the rear of the handle until it clicks securely into place.
3. To remove the battery, press the release button on the battery pack and pull it out.

Note: The battery and charger are not included with this product and must be purchased separately.

4.2. Blade Asomọ

1. Ensure the device is switched off and the battery is removed.
2. To attach the grass cutting blade (pre-installed or for replacement): Align the blade assembly with the gear housing and push it firmly until it locks into position.
3. To remove the blade: Locate the blade release button/lever (refer to specific diagrams in the full manual if available) and press it while pulling the blade assembly away from the device.
4. Always handle blades with care, wearing protective gloves.

5. Awọn ilana Iṣiṣẹ

5.1. Bibẹrẹ ati Iduro

1. To start the device, first press the safety lock button, then press the ON/OFF switch.
2. To stop the device, release the ON/OFF switch. The safety lock automatically resets.

5.2. Awọn imọran lilo

• Grass Trimming: Hold the device at a slight angle to the ground and move it steadily along the grass edges. The 10 cm cutting width is ideal for precise work.
• Shrub Shaping: For shrub trimming (if shrub shear blade is attached), use smooth, sweeping motions. Avoid cutting branches thicker than recommended for the blade.
• Iṣe Ti o dara julọ: For best results, use the tool on dry grass and shrubs. Wet material can clog the blades and reduce cutting efficiency.
• Titiipa aabo: The integrated safety lock prevents unintentional activation, enhancing user safety.

6. Itọju

Regular maintenance ensures the longevity and safe operation of your Einhell GC-CG 18/1 Li.

• Ninu: After each use, remove the battery and clean the blades and housing with a brush or cloth. Do not use water or harsh chemicals.
• Itọju abẹfẹlẹ: Periodically apply a light machine oil to the blades to prevent rust and ensure smooth operation. If blades become dull, they can be sharpened or replaced.
• Ibi ipamọ: Store the device in a dry, frost-free location, out of reach of children. Ensure the blades are protected, for example, with a blade cover.
• Ipamọ Batiri: Store battery packs in a cool, dry place, partially charged (around 50%) if storing for extended periods.

7. Laasigbotitusita

8. Imọ ni pato

9. Atilẹyin ọja ati Support

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Einhell webojula. Jeki ẹri rira rẹ fun eyikeyi awọn ibeere atilẹyin ọja.

Òṣìṣẹ́ Einhell Webojula: www.einhell.com