DB Electrical 410-48316 Starter Instruction Manual

1. Ọja Ipariview

The DB Electrical 410-48316 Starter is a high-quality aftermarket component designed to meet or exceed OEM specifications for various Mitsubishi Industrial and Caterpillar models. This starter is engineered for reliable engine ignition and long service life.

Awọn ẹya pataki pẹlu:

• Unit Type: Starter
• Voltage:24V
• Rotation: Clockwise (CW)
• Teeth: 10
• KW: 5.0
• Starter Type: OSGR

olusin 1.1: Iwaju view of the DB Electrical 410-48316 Starter, showing the solenoid and gear assembly.

olusin 1.2: Apa view of the DB Electrical 410-48316 Starter, highlighting the electrical connections.

olusin 1.3: Angled view of the DB Electrical 410-48316 Starter, showing the mounting points.

olusin 1.4: Ẹyìn view of the DB Electrical 410-48316 Starter, displaying the motor housing.

2. Imọ ni pato

This starter is compatible with/replacement for various models, including:

• CATERPILLAR: DP40
• MITSUBISHI: FD-20, FD-20B-D, FD-20B-DS, FD-20D, FD-25, FD-25B-D, FD-25B-DS, FD-25D, FD-25DS, FD-25T, FD-30, FD-30B-D, FD-30B-DS, FD-30D, FD-30DS, FD-30T, FD-35A, FD-35A-D, FD-35AB-D, FD-35AT, FD-35D, FD-35D2, FD-35DS, FD-38, FD-40D, FD-40D2, FD-45D, FD-45D2, FD-50C, FD-50C-D

3. Fifi sori ẹrọ ati Oṣo

Proper installation is crucial for the safe and effective operation of your new starter. If you are unsure about any step, it is recommended to consult a qualified mechanic.

3.1 Awọn iṣọra aabo

• Nigbagbogbo ge asopọ batiri ọkọ (ebute odi ni akọkọ) ṣaaju ki o to bẹrẹ iṣẹ itanna eyikeyi.
• Wọ ohun elo aabo ti ara ẹni ti o yẹ, pẹlu awọn gilaasi aabo ati awọn ibọwọ.
• Rii daju pe ọkọ ni atilẹyin ni aabo lori awọn iduro Jack ti o ba ṣiṣẹ labẹ.
• Jẹ́ kí ẹ̀rọ náà tutù pátápátá kí o tó bẹ̀rẹ̀ iṣẹ́.

3.2 fifi sori Igbesẹ

1. Locate the Starter: Identify the existing starter motor on your vehicle. Its location can vary by vehicle model.
2. Ge Asopọmọra: Carefully disconnect all electrical connections from the old starter. Note the position of each wire for correct reinstallation.
3. Yọ awọn boluti fifi sori ẹrọ kuro: Remove the bolts securing the old starter to the engine or transmission housing.
4. Yọ Atijọ Starter kuro: Carefully extract the old starter motor from its position. It may be heavy.
5. Fi sori ẹrọ Ibẹrẹ Tuntun: Position the new DB Electrical 410-48316 Starter in place and secure it with the mounting bolts. Ensure it is seated correctly.
6. Tun Asopọmọra Waya: Reconnect all electrical wires to the new starter, ensuring all connections are tight and secure. Refer to your vehicle's service manual for specific wiring diagrams if needed.
7. Batiri Atunso: Tun batiri ọkọ pọ (ebute to dara ni akọkọ, lẹhinna odi).
8. Iṣiṣẹ Idanwo: Attempt to start the engine to verify proper installation and function.

4. Awọn ilana Iṣiṣẹ

The DB Electrical 410-48316 Starter operates as an integral part of your vehicle's starting system. Its function is to crank the engine to initiate combustion.

4.1 Isẹ deede

1. Rí i dájú pé ọkọ̀ náà wà ní Park (P) tàbí Neutral (N).
2. Insert the ignition key and turn it to the 'START' position.
3. The starter motor will engage the engine's flywheel, causing the engine to crank.
4. Once the engine starts, release the key, and the starter will disengage.

4.2 Àwọn Ohun Tó Ṣe Pàtàkì

• Avoid prolonged cranking (more than 10-15 seconds) to prevent overheating the starter motor. If the engine does not start, wait a few minutes before attempting again.
• Do not attempt to start the engine if it is already running.

5. Itọju

The DB Electrical 410-48316 Starter is designed for durability and minimal maintenance. However, periodic checks can help ensure its longevity and optimal performance.

5.1 Àwọn ìmọ̀ràn ìtọ́jú gbogbogbò

• Ṣayẹwo awọn isopọ: Periodically check all electrical connections to the starter motor for tightness and corrosion. Loose or corroded connections can impede current flow and affect performance.
• Jeki mimọ: Ensure the starter motor and its surrounding area are free from excessive dirt, oil, and debris. A clean environment helps prevent overheating and extends component life.
• Ilera Batiri: A healthy battery is essential for proper starter operation. Ensure your vehicle's battery is fully charged and in good condition.
• Iduroṣinṣin USB: Inspect battery cables and starter cables for any signs of wear, fraying, or damage. Replace damaged cables promptly.

6. Laasigbotitusita

This section provides guidance for common issues you might encounter with your starter motor. Always ensure safety precautions are followed before attempting any troubleshooting.

If these troubleshooting steps do not resolve the issue, it is recommended to seek assistance from a certified automotive technician.

7. Atilẹyin ọja ati Support

7.1 Atilẹyin ọja

The DB Electrical 410-48316 Starter comes with a 1-odun atilẹyin ọja from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. If the product does not function flawlessly within one year of your order, DB Electrical will replace it.

Jọwọ ṣe idaduro ẹri rira rẹ fun awọn iṣeduro atilẹyin ọja.

7.2 Onibara Support

For any questions, technical assistance, or warranty claims, please contact DB Electrical customer support. Our team is dedicated to assisting you with any issues you may encounter.

You can find contact information on the official DB Electrical webojula tabi nipasẹ atilẹba rẹ ojuami ti o ra.